The app I'm working on relies on the correct date/time being set for synchronization purposes. Apparently you cannot programmatically set the date and time on the phone. Is there a way though to open the Date/Time settings programmatically?
You can use the Lancher class to navigate to various settings, but there's NO option to open the date time selection.
Here's the available uri schemes for settings:
Launch Airplane Mode Settings Page: ms-settings-airplanemode:
Launch Bluetooth Settings Page: ms-settings-bluetooth:
Launch Cellular Settings Page: ms-settings-cellular:
Launch Wi-Fi Settings Page: ms-settings-wifi:
Launch Location Settings Page: ms-settings-location:
Launch Account Settings Page: ms-settings-accounts:
Launch Email Account Settings Page: ms-settings-emailandaccounts:
Launch Lock Screen Settings Page: ms-settings-lock:
All available Uri Scemes
Thanks for clearing that up. I don't think you can do this the way you want to.
From this link:
At best you can get the difference between the user's clock and the clock on the system to which the program is talking. Of course the user's clock is subject to change. I don't think that people change their clock's time very frequently, but it is still something to be considered.
You can launch some settings programatically like this:
Windows.System.Launcher.LaunchUriAsync(new Uri(“ms-settings-bluetooth:”));
But date/time is not one of them. here is a link to available settings
Related
The run button in PopSQL greyed out a while ago after I restarted my laptop. No matter how I tried I couldn't click on it. I re-checked, double-checked my queries but it still didn't work.
Please help.
First of all, check the following -
Your query - Check for semantic errors.
Your database connection - There may be some fault in the connection itself. Try connecting again with the database. Check if just above the tab where the connection is specified if you can see your database name like this -
If you have just installed MySQL in your laptop (or anyways, now you don't have any other option) -
Open run from Start Menu or press windows key + R.
Search for 'services.msc'.
In the search window, search for MySQL80. Double click on it to open.
You will notice that the service is either disabled (in startup type) or stopped in the service status.
Select Automatic or Automatic (Delayed start) in the select box of Startup type and click on apply. So that whenever your machine starts the MySQL service will start automatically in the background.
After that click on the Start button to start the MySQL service on your machine. It will take a few seconds to start.
Then click on apply and hit Ok. Then close the services window also.
Now try opening PopSQL you'll see that database connection has been corrected.
ENJOY!!!
I Have created a application, in SAP ABAP and also I have generated a request number for that application, no I have forgot which is my request number since there are many requests in development server.
So, can someone help me how I can find out my request number, from my application.
Either you start transaction SE10, if necessary enter your user name (should be there by default) and hit Enter. You'll get a complete list if your transports, you just have to find the one, you need.
Or you start the transaction where you developed your application (you did not specify, if it is a program than SE38 or SE80, if it is a function module than SE37, SE24 for classes, etc (however in SE80 you can see everything)) enter the program name and go to menu: Goto / Object directory entry, a popup comes up, now click the button 'Lock overview'. Another popup comes up and tells you, which transport contains your object.
Steps to Identify all the request numbers of an object/application.
Open 'SE38'.
Provide your object/application name.
Click on 'Display Button'.
In the Menu bar click on 'Utilities'.
Click on 'Versions' --> 'Version Management'.
Now we can find all the request numbers of that object/application.
Currently this is my delima. Once in a while a build agent will reboot. It needs to always stay connected to share on one of our servers. The idea was to tell finder to mount the volume, wait 2 seconds, and then press enter...since the user name and pssword are both part of the address when I enter it such as SMB://username:password#Server1/DFS it pops up the pasword dialog fully populated but I can't get applescript to recognize it, then press either connect or the return to say "Yes" login witht hat name and don't prompt me.
it worked fine when connecting at home to a synology device but it's not working when connecting to a server in the office.
tell application "Finder" to mount volume "SMB://username:password#Server1/DFS"
delay 2
tell application "System Events" to keystroke "return" -- key code 36
Any help for this seemingly simple step would be greatly apprecited.
I have looked ove the forums and found variou stratagies but they all relate to an application like Firefox or some other script aware app. I just need it to press enter when the password dialog comes up.
First of all the Finder is not needed to mount a volume, you can delete the tell block.
Secondly, if username and password are passed the volume is supposed to mount without a dialog. Maybe you could find the reason why it doesn't.
Nevertheless the password dialog belongs to the process SecurityAgent, you have to use (ugly) GUI scripting to press the button:
tell application "System Events"
repeat until exists process "SecurityAgent"
delay 0.5
end repeat
tell window 1 of process "SecurityAgent"
click button 2
end tell
end tell
The script waits until the window appeared, this is much more reliable than an hard-coded delay.
Looks like a possible XY Problem as I would expect a solution such as https://apple.stackexchange.com/a/698/204318 to work for you to directly mount the share:
mount -t smbfs //username:password#MACHINENAME/SHARENAME /SomeLocalFolderOfChoice
However, if you are really required to interact with the dialog, and as you asked about it, take a look at this tutorial (written in Python) for scripting up something:
detect missing connection
attempt connection
capture screen periodically
look for dialog box, else loop
error after a few seconds of failure
if dialog is detected, interact with it
input username and password
wait, then press return
check if connection worked after a small delay
success or failure
This type of strategy is very powerful for interacting with all sorts of different dialogs you may encounter and should be possible in AppleScript if you are much more familiar with it (or another scripting language).
If you are open to non-AppleScript solutions, then you might consider Keyboard Maestro, one of the best Mac automation tools available.
You said:
it pops up the pasword dialog fully populated but I can't get
applescript to recognize it, then press either connect or the return
to say "Yes" login witht hat name and don't prompt me.
You could probably do this very easily using Keyboard Maestro. Here's an example of the KM Actions to accomplish this.
If you'd like help with KM, please visit the forum at:
https://forum.keyboardmaestro.com/
I'm a big AppleScript/JXA user, but I often find it easier/quicker to use KM for many automation tasks. Of course, KM Macros can execute AppleScript, JXA, Shell Scripts, and other scripts easily.
You can try a full version of KM for free for 30 days.
I would need to be able to allow users to 'loop' through our MOH files.
Currently we have MOH set like this:
[moh]
mode=files
directory=/var/lib/asterisk/moh/custom
is there a way to allow users to go to next file from that directory by clicking number 1 on keypad?
Thank you
Only variant i see without rewrite of asterisk is just stop/start moh based on key pressed
See features.conf
http://www.voip-info.org/wiki/index.php?page_id=1483
You also can create custom application which stream file and other app which on key pressed do "next track" on that app, but that will result alot of CPU usage.
See streaming:
http://www.voip-info.org/wiki/view/Asterisk+config+musiconhold.conf
I have setup the AIF so that when an invoice is created, it gets added to the queue. I know that this doesn't work when Printing to Screen. So I had adjusted the print management settings for that customer to Print to Archive. However, the document still doesn't get added to the AIF queue.
After some investigation, I've found out why. Even though I have "Use Print Management" ticked in the Posting box for posting an Invoice, Under the Printer Setup I have "Send To" set to screen still, when I change this to Print Archive my document gets added to the AIF queue.
So my question is, why is this the case? Why doesn't it pick up what I have set in Print Management for that customer?
I attempted to recreate your issue, but it worked for me just as you would have expected. Perhaps your customer print management isn't set up correctly.
To change my test customer's print management settings, I went to the customer in the customer master form, click Setup -> Print management. Expanded Module -> Account -> Documents -> Sales order invoice. Right-clicked on Original and clicked Override. Then I overrode the default printer destination for that customer.
Follow those steps if you haven't already, and let me know if that works. If not, there may be some other problem.
Are your printers configured as AOS printers? See Classes\SalesFormLetter\checkAOSPrintersPrintManagement
Does this have the same issues in your test environments? Try resetting your usage data. There is a usePrintManagement variable packed in the invoicing process.
If you can debug this, it should be fairly easy to step through and see if print management is actually getting used.