I could find the wiki page which is telling about opensolaris os is containing official site link which does not contain opensolaris download thread etc. Moreover, there is no more opensolaris official site as said here ; The http://opensolaris.org redirects to https://solaris.java.net/ only.
So my question is ... does the opensolaris still exist? Where to download the latest version from a safe download center?
There are a number of illumos(opensolaris) based distros. omnios, opensxce, openindiana. I like openindiana because it is the closest to opensolaris. I am not sure how things have changed, but i use it now cleanly with nvidia.
No, OpenSolaris no longer exists. The final release of the OpenSolaris distro was 5 years ago, OpenSolaris 2009.06, and bug fixes & security fixes are no longer available for it.
After the Oracle acquisition, OpenSolaris forked - Oracle continued developing the code and released new versions under a closed-source license as Solaris 11, while the illumos community took the open source code base and developed it further themselves, generating a variety of different distros. Which you use depends on what you want/need from an OS, but there is no single distro that is an exact match for what OpenSolaris was.
Related
Is there a file which ties the libversion to the release number. The libversion is in a file in the release, but I can't find documentation to trace this back. Working with a version of Linux that has one libversion of Poco and a SDK that was released was a different libversion and I am trying to track down the releases. Thanks.
I figured I go ahead and try to get and answer on Git Hub. There is no master file/database with the numbers , but it isn't super difficult to find. If you go to the tagged version (eg 1.11.0) and look at libversion - the number will be 81. Go back to tag version 1.6.1 and the libversion and the number is 31. I was able to create the database of the versions I needed based on trial and error.
I need to migrate an enterprise production database from a Windows source machine running Postgres 9.5 to an Ubuntu destination machine running Postgres 11.6 with < 15 mins downtime. I plan to do this with pglogical, which requires the extension being loaded on both source and destination. I am having trouble with the source side because it is Windows.
I have very little Postgres-Windows experience and can neither find any helpful literature on the specific situation nor can I figure out for myself how to presumably install from source.
I've dug and dug and so far the only answer I've been able to find is "ugh... Windows". It seems like the only way to build from source is using Visual Studio, which I don't have or know how to use.
Sources:
https://www.2ndquadrant.com/en/blog/compiling-postgresql-extensions-visual-studio-windows/
https://postgrespro.ru/list/thread-id/1835275
Alex, the 2ndQuadrant article you link to in your own comment solves this. A few of the project or build options noted there have moved a little bit in the newer VisualStudio Community editions, so I can see where you got hung-up.
Just for kicks I compiled 32-bit DLL on my oldest Windows instance. I included the /Release path so you can grab my DLL & see if it works for you. It's (a) 32-bit because I'm assuming worst-case for an old v9.5 install, and (b) targets Postgres 9.6 because that's what I had installed. Unless there were major API changes though, it should connect to v9.5 without any issues:
https://github.com/mbijon/winpglogical/tree/master
If you find you need a version that entirely matches Postgres 9.5, grab my solution files & VS Community 20xx. Load the project & update the Additional Include Directories in Project Config to target your v9.5 paths. That should be all that's needed to link v9.5 Postgres libs.
When I run install.packages("somepkg") on Linux (Ubuntu mostly), the installation process invovled building the R package from source which can be time consuming. Also it can be prone to failure due to missing development related Linux packages.
Is there a way to install compiled binaries like on Windows? I heard that it can be done, but couldn't find an easy to understand resource. Hope by asking here I will make the answer (if it exists) more googlable.
It depends on whether binaries exist. Which, in turn, depends on which Linux distro and version you are running.
For Ubuntu 18.04 (and later, as they are compatible), you can use the Rutter PPAs which cover over four thousand CRAN package. This is described (albeit very briefly) at the top of this README at CRAN.
I also blogged about that (a few times) below my r4/ tag -- and because it didn't really "stick" amplified it again with short video plus slides, see this post. The video runs for about 5 mins during which we install rstan and tidyverse as binaries each with just one command and it takes about a good minute each (depending on bandwidth and disk speed, of course) pulling all dependencies in pre-built and in a fail-safe manner.
If this matches your needs, give it a try and please come to to the r-sig-debian list for questions.
If you are on a different Linux flavor then I unfortunately less sure if a comparable service exists.
Edit on 2020-09-17 As this was just upvoted and I was thus reminded of it, you now have better options and can get Linux binaries via install.packages("pkgname"). One way is RSPM, the other is BSPM. I have a first comparison blog post comparing both here (even with animated gif movies ;-)) and should be able to say more about BSPM "soon".
Edit on 2022-08-03 And going beyond RSPM and BSPM is the newer r2u which has been up for a few months and is currently serving around two thousand binaries a day. It is the best approach for binaries on Ubuntu LTS installations (currently: 20.04 and 22.04). See r2u for more including demos.
I'm currently working in web development and my default desktop is Ubuntu and I'm kind of happy with the setup and applications I got going. But I need to test web pages for cross browser compatibility while still being on Ubuntu.
I have gone through hell trying to get IE7 or IE8 (with wine) to run on ubuntu and when they finally worked they were very buggy and the graphics/scrolling was insanely slow.
Of course there is the option of virtual box but again, too much GBytes just to run a small application!
So to all the CSS gurus out there, how can I continue with my beloved Ubuntu and still deliver a good quality (tested) page.
Thank you.
Edit:
Update for freshness:
I now use the paid service from browserstack.com to provide the multitude of different browser testing environments via flash tunnelling. I'm a paid user, but there is an initial free trial period. browserstack has freed me of the need to run the windows os on my machines in any form, virtual image or otherwise. Since it also allows tunnelling, I can host the site on my local machine but still test in browserstack browsers. I consider the monthly fee money very well spent.
End Edit
Various options I have tried, including "the final solution": free downloadable windows testing OSes from microsoft
I've tried a number of the options below, but virtualbox may be your best bet for full & complete testing, especially because in a professional capacity you often have to test ie8, ie7 -and- ie6. Which gets tricky with only a single os installed. So in order of simplest and most shallowly testing to most complex and most fully testing:
browserlab.adobe.com
A newer, interesting online solution is: browserlab.adobe.com. It's actually very specific and fast compared to browsershots. It only gives you screenshots, but it's a great first step. So I do recommend that for purely visual (and thus relatively shallow) testing.
Browsershots.org
And while browsershots.org is also something that you should use for an overview experience of what users might see, you really can't get by without the real browsers for javascript and behavior testing (instead of just display & rendering testing that browsershots provides). The delay before you can see the images is also killer.
Dual booting into windows
Another that I've tried is dual booting, I work 99% of my time in ubuntu, and I have windows installed & available to dual boot into. Not a fast way to test, but if you don't have any other way to access ie, it should work for at least the latest version.
Remote desktop-ing over to a running windows box
Before I mention the "covers-all-the-bases" option, another useful possibility is to set up a windows machine and boot it up and connect to it via remote desktop so that you can work from one machine and test from both.
The final solution, using virtualbox
Finally, the mother of all solutions, using virtualbox:
Luckily (I know you said you didn't like the virtualbox solution, and I know it's an annoying setup process, but...) Microsoft provides available-for-a-year-or-more virtualmachine distros with different versions of ie pre-installed, available without the need for a license for a year or so before you'd have to update the virtualmachine, #
http://www.microsoft.com/downloads/details.aspx?FamilyId=21EABB90-958F-4B64-B5F1-73D0A413C8EF&displaylang=en
Installing a virtualmachine from microsoft's freely available browser testing images
Because this guide to setup on ubuntu is no longer available in full anywhere else, just in case you or someone else actually need it I feel compelled to include the actual details of the install process that were suggested to me on the ubuntu forums and worked when I went through them. I apologize for their length. Courtesy of the now anonymous original poster on the ubuntu forums:
Free Access to Microsoft Browser Compatibility Virtual OSes, Install Steps for Ubuntu
http://ubuntuforums.org/showthread.php?t=1097080 (Ed: I can't find this thread online any more)
HOWTO: run IE6, IE7, IE8 on Linux in
VirtualBox You need: virtualbox, qemu,
wine
Code: apt-get install virtualbox qemu
wine
Download the free(!) Microsoft
Internet Explorer Application
Compatibility Check VPC Images here:
http://www.microsoft.com/downloads/details.aspx?FamilyId=21EABB90-958F-4B64-B5F1-73D0A413C8EF&displaylang=en
(Note: you don't have to download the
full pack, you can cherry pick
specific combinations of XP/Vista and
IE6-8)
Extract the VPC image(s) with wine
(double-click). (Note: it might take a
while before the first window shows
up)
Turn the VPC image(s) into (a) VMWare
image(s) (which is/are readable by
VirtualBox): qemu-img convert -f vpc
image.vhd -O vmdk image.vmdk
Setup a new VM in VirtualBox, using
the vmdk image as an existing disk.
Boot it, you will see the Windows boot
progress bar and ... it will BSOD
shortly after.
Fixing the BSOD:
The BSOD is caused because the virtual
Windows tries to load processor
drivers for the wrong processor (it is
not running on VirtualPC proc, but on
VirtualBox proc). Or something like
that... We need to force Windows not
to attempt to load drivers for the
processor (it doesn't need any proc
drivers, because it's all virtual
anyway). Start safe mode by
(frantically) hitting F8 at Windows
boot and choosing safe mode.
Ignore all the 'New hardware' detected
warnings (we will deal with those
later). Start a command box and run
the following command to disable the
loading of processor drivers:
Code: sc config processor start=
disabled (note the space between '='
and 'disabled'!)
Restart the virtual Windows, it should
now boot all the way to the Windows
Desktop.
Now just when you think you can start
browsing the web with IE, you will
find out that the virtual Windows
needs to install the drivers for the
AMD PCnet NIC, which are located on
the Windows install disk. Fortunately
for those without a Windows install
disk, there is another way :)
Download AMD PCnet drivers here:
http://www.amd.com/us-en/ConnectivitySolutions/ProductInformation/0,,50_2330_6629_2452%5E2454%5E2486,00.html
Make an iso file containing the
drivers. I used Brasero for
simplicity. Choose to create a Data
Project, add the zip file (or the
unzipped files, saves you a step in
Windows), create the iso. No need to
burn an actual cd!
Stop the virtual Windows, edit the
settings in VirtualBox: mount your
brand new iso.
Start the virtual Windows, when it
asks to install the drivers for the
PCnet nick, point it to the (unzipped)
drivers. Et voila! You have teh
innernets! (Now you can also try to
install the other drivers it complains
for, but it's not really necessary)
The image README says the image will expire after about a year. In my experience the system gets hobbled against multi-hour use, but is still usable for the kind of short periods that you might want when booting up to test a website. At worst you might have to go through these steps again, so be sure to put them somewhere where you can find them again after a year or so.
I think setting up a virtual machine (Virtualbox or VMWare or...) with a proper Windows will be your only (local) option.
I you don't have one, buy a used Windows XP license. XP is cheap (around 20-30 euros here in Germany, for example) and all relevant versions of IE run on it. Home edition is enough. No need for Windows 7 or anything.
You could install IETester on that to get all the IE versions on one OS. IETester has flaws and is not always 100% reliable in what it renders, but for a general CSS compatibility check it should be okay.
I've never tried IE using Wine, but even trying to imagine the combination gives me goose bumps :D
If you have a copy of Windows you could install it in a virtual machine (Virtualbox is a good, free option). Or if you don't mind a lot of lag time and publicly exposing your web pages you could use a service like BrowserShots.
I have not tried this on Ubuntu or anything but windows - but this seems to be a pretty good testing system over the web.
http://spoon.net/browsers/
however, I think your best result would be to use a VM if possible.
I have to add my voice to those opting for VirtualBox.
VMs are the only way to get an accurate representation of how IE platforms behave. They also allow you to keep your main Linux install free of WINE and IE gunk, which is otherwise always troublesome and fragile. (Especially if you're trying to run multiple IEs, which is unreliable and inaccurate even under Windows).
They're not necessarily that big, if you take care to prune the unneeded features, turn off swap, compact the disc image and so on. My XPSP3 test image is just over 800MB.
I didn't want to install all this stuff as I wanted to move forward quick.
I found public AWS images with pre installed browser that you just can start and use.
http://www.hens-teeth.net/html/products/cross_browser_testing.php
If you already have an AWS account this will take you only 5 min. Make sure that you enable the RDP port on the incoming traffic in your security group.
As I use ubuntu I was looking for a way to connect from it to MS Win.
I'm connection on to them via remote desktop.
The way to go here is rdesktop, a command line utility for Windows Remote Desktop. (sudo apt-get install rdesktop)
If you feel like a GUI use tsclient. It's very close to the windows version.
From a work flow perspective I develop for Chrome in Ubuntu first, then have a look at the other browsers via browserlab.adobe.com.
After that I start my new AWS instance to debug.
The small AWS Windows instance is a $0.12 per hour (http://aws.amazon.com/ec2/#pricing). I can work for a long time on that before it's worth installing all this stuff.
CrossBrowserTesting.com works from Linux. Allows you to access Mac, Windows, and Ubuntu configurations and all the browsers loaded on them via vinagre vnc client.
I love applications that are able to update themselves without any effort from the user (think: Sparkle framework for Mac). Is there any code/library I can leverage to do this in a Qt application, without having to worry about the OS details?
At least for Windows, Mac and user-owned Linux binaries.
I could integrate Sparkle on the Mac version, code something for the Linux case (only for a standalone, user-owned binary; I won't mess with distribution packaging, if my program is ever packaged), and find someone to help me on the Windows side, but that's horribly painful.
It is not a complete solution, but a cross-platform (Windows, Mac, Linux) tool for creating packages for auto-updates and installing them is available at https://github.com/mendeley/Update-Installer. This tool does not deal with publishing updates or downloading them.
This was written for use with a Qt-based application but to make the update installer small, standalone and easy to build, the installer uses only standard system libraries (C++ runtime, pthreads/libz/libbz2 on Linux/Mac, Win32 API on Windows, Cocoa on Mac, GTK with fallback on Linux). This simplifies delivering updates which include new versions of Qt and other non-system libraries that your application may depend on.
Before considering this though, I would suggest:
If you are only building for two platforms, consider using standard and well-tested auto-update frameworks for those platforms - eg. Sparkle on Mac, Google's Omaha on Windows or auto-update systems built into popular install frameworks (eg. InstallShield). I haven't tried BitRock.
On Mac, the Mac App Store may be a good option. See https://bugreports.qt.io/browse/QTBUG-16549 though.
On Linux, consider creating a .deb package and a simple repository to host it. Once users have a repository set up, the system-wide software update tools will take care of checking for and installing new releases. The steps for setting up a new repository however are too complex for many new Ubuntu/Debian users. What we did, and also what Dropbox and Google have done, is to create a .deb package which sets up the repository as part of the package installation.
A few other notes on creating an updater:
On Windows Vista/7, if the application is installed system-wide (eg. in C:\Program Files\$APPNAME) your users will see a scary UAC prompt when the updater tries to obtain permissions to write to the install directory. This can be avoided either by installing to a user-writable directory (I gather that this is what Google Chrome does) or by obtaining an Authenticode certificate and using it to sign the updater binary.
On Windows Vista/7, an application .exe or DLL cannot be deleted if in use, but the updater can move the existing .exe/DLL out of the way into a temporary directory and schedule it for deletion on the next reboot.
On Ubuntu, 3rd-party repositories are disabled after distribution updates. Google works around this by creating a cron-job to re-add the repository if necessary.
Shameless plug: Fervor, a simple multiplatform (Qt-based) application autoupdater inspired by Sparkle.
Shameless plug: this a relatively old question, but I thought that it may be useful to mention a library that I created recently, which I named "QSimpleUpdater". Aside from notifying you if there's a newer version, it allows you to download the change log in any format (such as HTML or RTF) and download the updates directly from your application using a dialog.
As you may expect from a Qt project, it works on any platform supported by Qt (tested on Windows, Mac & Linux).
Links:
Website
GitHub repository
Screenshot:
Though it works a bit differently than Sparkle, BitRock InstallBuilder contains an autoupdater written in Qt that can be used independently (disclaimer, I am the original BitRock developer). It is a commercial app, but we have free licenses for open source projects.
I've developed an auto-updater library which works beautifully on Mac OS X, Linux and pretty much every Unix that allows you to unlink a file while the file is still open. The reason being that I simply extracted the downloaded package on top of the existing application. Unfortunately, because I relied on this functionality, I ran into problems on Windows as Windows does not let you unlink an open file.
The only alternative I could find is to use MoveFileEx with the replace on reboot flag, but that is awful.
However, renaming the working directory of the application works on Windows 7 and Windows XP. I haven't tried Windows Vista yet.
I have found WebUpdate to be quite useful, though it's written with the wxWidgets. But don't worry, it's a separate app which handles your updates. The steps to integrate it are pretty simple - just write two XML files and run the updater. And yes, it's cross-platform.
The advantage of it is it will automatically download and unzip/install all you required and not just provide a popup with a notification about a new version and a link to download it. Another thing you can do with it is customizable actions.
Project's main page is here, you can read the docs or take a look at the official tutorial.
The blog post Mixing Cocoa and Qt may solve the problem for the Mac platform.
You can use UpdateNode which gives you all the possibilities to update your software. It's using a cross platform Qt client and is free for Open Source!
UPDATE
Just did some further analysis on that and really like this solution:
Pros:
Free for Open Source!!! Even the client is Open Source: https://github.com/updatenode/unclient
The client is already localized in several languages
Very flexible in terms of updates. You can even update single non-binaries.
Provides additionally a way to display messages though the client.
Ready to use binaries & installer for all common Linux distributions, single Windows binary, as well as installer and a solution for Mac (which I have not tried, as I don't have a Mac)
Easy to use web service, nice statistics and update check is integrated within few minutes
Cons:
I am missing a multi-user management in the online service. Maybe they will do it in future - I will definitely suggest that in their feedback portal
The client is a GUI client only - so, you will need to shrink it down to run without a GUI frontend (maybe only necessary for people like me ;-) )
So, bottom line, as this solution is quite new, I think there is lot of potential here. I will definitely use it in my project and I am looking forward for more from them! Thumbs up!
This is an old question but there is not Squirrel in answers which is BEST SOLUTION , here is what I'm doing in qt 5.12.4 with qt quick "my qml app" you can do this in any other language
I'm doing this in windows there is mac version of squirrel too, I don't know about Linux
download nuget package explorer release
https://github.com/NuGetPackageExplorer/NuGetPackageExplorer/releases
open nuget package explorer and add this directory 'lib/net45' it doesn't matter you have a .net app or not, I did this for my qt application otherwise it won't work.
add all files into this folder specify your version in the metadata
save nupkg file
download squirrel release https://github.com/Squirrel/Squirrel.Windows/releases
add squirrel to windows environment path
open cmd and cd to directory of nupkg file
squirrel --releasify file_name.nupkg -> now inide releases folder, there should be setup.exe file which will install app and other files.
to create new version do 2,3,4,7,8 again if its an update it will create delta file which is only needed file to update, put this files into your service directory for example in updates folder of your website which you need to disable directory browsing in IIS , and to auto-update application you need to call Update.exe which is in parent folder of application root directory appdir/../update.exe --update http://yourserver.com/upates/ after application restart app should start with new version
you can find documentation for squirrel in https://github.com/Squirrel/Squirrel.Windows/blob/develop/docs/getting-started/0-overview.md and nuget package explorer here https://github.com/NuGetPackageExplorer/NuGetPackageExplorer and you can use only nuget.exe too if you don't want to use nuget package explorer which can be used for dynamic generation of versions, which can be download from https://www.nuget.org/downloads
That easy. Now you have auto-update app which will download updates from the server and auto-update app. For more info you can read documentations.
note: for iis uses https://github.com/Squirrel/OldSquirrelForWindows/issues/205
I suggest you read on plugin and how to create and use them. If your application architecture is modular and be split into different plugins. Take a look at Google Auto Update utility http://code.google.com/p/omaha/. We use this.
Thibault Cuvelier is writing a tutorial (in French) to develop an updater. I know the explanations are in French (and everyone is not understanding French), but I think this can be readable with a web translator like Google Translate. With this you will have a cross-platform updater, but you need to write it by yourself.
For what I know, the only part of the updater that is explained in the tutorial, is the file downloading part. In the case this can help you, refer to the tutorial, Un updater avec Qt.
I hope that helps.
OK, so I guess I take it as a "no (cross-platform) way". It's too bad!
I have found a solution that can be automated with built-in self-extracting patches and updates. for windows. I have started using their sdk. take a look at the massive documentation here, https://agersoftware.com/docs/ the sdk is called securesdk and comes with their app, SecureDelta sdk. does a great job on any kind of files, better results than lzma-included delta updaters