I have an openshift wordpress blog running at http://blog-example.rhcloud.com/ and added CNAME records in my DNS management as follows.
example.com
www.example.com
and works fine. When i type, this leads to my blog home page.But the pages and links in the blog actually leads to openshift naming space. i.e., blog-example.rhcloud.com/?page_id=7
I just want to mask blog-example.rhcloud.com/ to example.com every where in my app.I would be happy to provide further information if any thing required to analyse the issue.
PS: I bought the domain from Big Rock and using their console for CNAME entry.
You need to go into your WordPress admin and change the url on the settings or options page to use your custom domain instead of the app-domain.rhcloud.com one. If you want to change it directly in the database (which i don't recommend) it is in the wp_options table under home and siteurl i believe... But I DO recommend using the WordPress admin.
You need to go to
Settings=>General=> Site Address(URL),
Settings=>General=> wordpress address(url)
and update it to your custom domain.
Follow this article. it's step by step manual http://www.devua.co/2016/05/20/how-to-run-blog-on-openshift-complete-guide/
Related
I'm confused, I have a miltisite wordpress installation but also another site managing the customer areas.
So I have the site on the main domain www.domaine.com and i installed the wordpress multisite in a subdomain: sites.domain.com
So far everything is fine, but when I want to create a site, wordpress requires me to be subject to the subdomain like this: other.site.domain.com
I tried to modify the .htaccess and wp-config.php but when I go back to the site management it redirects me to www.domaine.com without my being able to access the wordpress multisite management...
How can I create sites with addresses under the domain and not under the subdomain like this:
other.domain.com and not like this other.site.domain.com
Thanks
It's ok, I can't access for two reasons.
One my wildcard is set on other folder than wp installation (blank page on subsite create)
Two I need to set address of new site for replace domain.com/other to other.domain.com
And now I can access to website and subsite.
Thank!
Thank you for your answer, I just tested but it does not react correctly.
When I put the configuration of DOMAIN_CURRENT_SITE on domaine.com I can no longer access the settings of the multisite network, I am redirected to the purchase site which is on the domain.
Another thing, if I therefore create a site in a subdirectory and not in a subdomain with the SUBDOMAIN_INSTALL configuration false, when I type test.domaine.com a blank page appears as if there was no site or if I Type site.domain.com/test/ it works.
I cleared the caches everywhere and tried again but nothing happened.
In case I expressed myself badly,
www.domain.com = The commercial site of the company
site.domain.com = Multisite management and sample site
other1.domain.com = Customer site created from site.domain.com
thanks again
I used AWS CloudFormation to create a Wordpress blog and then bought a domain from GoDaddy website and forwarded it to the domain name provided by CloudFormation
-->godaddy domain: yetanotherdeveloper.in
-->cloudformation domain: "ec2-35-154-134-194.ap-south-1.compute.amazonaws.com/wordpress/"
Problem 1:
When I search GoDaddy domain in the URL, I get to the site but then only CloudFormation domain is shown in the URL. I want the GoDaddy domain to be there.
When I open a post, before the slash in the URL, cloudformation domain is shown.(e.g. ec2-35-154-134-194.ap-south-1.compute.amazonaws.com/wordpress/index.php**/2017/09/27/hello-world/**) .I want godaddy domain to be there for ease of access for others.
Problem 2:
Cloudformation uses a public IP which could be dangerous in future in case the server gets down etc. So, i want to change the IP to elastic IP too.
This is after the site is loaded,i get old domain shown
This is when i open some other page or in this case, a post. Here also old domain
one last thing, i hope i'm not wasting much time of yours. If i am, it would be great to point out what i did wrong in this question and i will improve next time.
Thank you!
Regarding the URL, you need to set the root URL on the WordPress configuration to http://yetanotherdeveloper.in, and regarding Elastic IP, you need to update the Cloudformation template to create an EIP and link it to the created instance.
Best regards.
You will likely need to change your site URL in the WordPress configuration:
On the Settings->General screen in a single site installation of
WordPress, there are two fields named "WordPress Address (URL)" and
"Site Address (URL)". They are important settings, since they control
where WordPress thinks your site is located. They control the display
of the URL in the admin section of your page, as well as the front
end, and are used throughout the WordPress code.
I have a custom domain yourtechchick.com hosted with openshift. I have mapped Cname your-techchick.rhcloud.com to http://www.yourtechchick.com and it seems to work. But, When I click on posts, It leads to url with your-techchick.rhcloud.com/post-name . I want it to be yourtechchick.com/post-name. How do I fix this?
My permalink shows your-techchick.rhcloud.com option only. Is it possible to fix this with wordpress url and site url thing?
Also, I would like to know in detail the difference between wordpress url and site url.
I somewhere read this is where I need to change, if yes, which amongst these needs to be changed to http://www.yourtechchick.com from http://your-techchick.rhcloud.com.
and In case I mess up these settings, which file will I need to reupload through ftp client in wordpress directory?
You need to log into your wordpress admin, and change the home and siteurl options to be your custom domain, instead of the app-domain.rhcloud.com that you originally set it up with. Here is some official wordpress documentation for reference: https://codex.wordpress.org/Changing_The_Site_URL
In wordpress, how can I change where the links are pointing to without changing the server name or adding redirection?
My main site is a rails app at www.example.com.
I have the wordpress blog on a separate server at blog.example.com/blog
I have a reverse proxy on the primary (rails) server that takes any url that ends in /blog/ and then serves up the blog content. (That's all behind the scenes -- the user never sees the blog.example.com domain)
Currently, I can access the blog via the reverse proxy at www.example.com/blog, but the problem is that the urls on the blog point to blog.example.com/blog (wrong) instead of www.example.com/blog (right).
I've tried changing the urls in wp-config.php, but whenever I change those it breaks something.
I eventually figured it out. Here's what I did.
1) Got rid of the Bitnami wordpress image (on Amazon) and reinstalled wordpress fresh, from scratch, on EC2. Bitnami had a bunch of magic behind the scenes that was making it hard for me to figure out what was going on.
2) Via wordpress admin changed Site Address (URL) from http://blog.example.com/blog to http://www.example.com/blog Previously, I had been changing this in the wp-config.php file, but I am pretty sure that doesn't do the same thing. So I needed to change it in wordpress admin. However I needed to keep the Wordpress Address the same. Found out that the Site Address governs the urls displayed in the theme, whereas the Wordpress Address is the server hostname. I'm using a reverse proxy which is why this was confusing.
3) To enable pretty permalinks behind the reverse proxy I changed the permalink settings in wordpress admin, then I updated .htaccess according to its instructions, then I modified /etc/apache2/sites-enabled/000-default changing AllowOverride None to AllowOverride All. Need to do this to enable mod_rewrite to work on virtual hosts.
Go to wp-admin - settings, and change site url. Than flush permalinks by resaving settings.
You don't really provide a mountain of information. But you will need to check this area of your dashboard
http://www.steveovens.com/wp-content/uploads/2011/09/wpid209-Check__Force_HTTPS_in_site_address__Wordpress_address.png
to make sure the information is
http://54.235.249.193/blog/
In both fields.
If you still have issues try changing your permalink setting to a new setting save it and then change it back again and save.
http://www.webmikesites.com/wp-content/uploads/2013/09/permalink-settings.png
If you are unable to access the dashboard of the site on the address
http://54.235.249.193/blog/wp-login.php
As it redirects you to the other domain.
Then you need to likely change the two fields mentioned earlier siteaddress and wordpressaddress via the database. Find the table in your database wp_options or yourtableprefix_options and edit the fields option_value where the option_name is siteurl and home to have the address
http://54.235.249.193/blog/
Also if you are just starting using a webserver. You may need to make sure your files are writable by the webserver.
Our company is trying to transition to WordPress Multisite but we have several issues working against us at the moment. We host WP outside our server environment (we use Amazon for our WP sites) so we actually have to use an URL proxy to our Amazon servers. The other issue is that we needed to install Multisite in the root of the folder so the domain is http://100.10.20.30/foldername but we can't proxy that to http://www.domain.com/foldername because that is a live site that we're not moving to WP any time soon. So, of course, the problem we're running in to is that the IP is showing up not only in the source code but in Google now as well (which we don't want).
Does anyone know of anything we can do to keep the IP out of the source code/Google? I was thinking about rewrite rules in the htaccess file but didn't want to do anything until I had some better ideas.
Also, I can't use the domain mapping plugin that everyone seems to suggest for this type of issue because our sites aren't hosted in the root of our server (a prerequisite for the plugin).
So to break it down, this is what we need:
Multisite Parent Blog <-- This has to be the IP address
Multisite child blogs <-- Domain name but when we set the actual proxied domain name in the settings we get a 404 error because it's not looking in the right place. It's looking for an actual folder on our internal servers.
Thanks!
Found the solution myself. Posted below:
In the Multisite dashboard, click on "All Sites" then administer the specific site.
Under the "Path" field, you'll need to deselect the "Update siteurl and home as well."
Save changes.
Click on "Settings" tab.
Change the URL in the following fields: "SiteURL" and "Home"
Save changes.
When all is said and done, the IP is showing in the "Info" tab but it changes the URL in the source code to your domain.