I had a requirement to create a report based on individual user whom having SR waiting for approval, On click on Ticket id the URL's should redirect to SR detailed page where he can check request approve or disapprove.
using hyper link in birt properties unable to pass the ticketid by using below url's
http://google.com/maximo/ui/maximo.jsp?event=loadapp&value=asset&additionaleventvalue=Ticketid
Could you anybody help in this regards.
If the cell you made clickable contains the ticketId, go to Properties -> Hyperlink -> Edit...
Select hyperlink type URI, and click the dropdown to the right of 'Location' to go to the Javascript window.
If you're going to use it more than once, I would make the static part of your hyperlink a variable. Then add the ticketId by clicking "column bindings" in the left-lower column in the JavaScript window and selecting the appropriate cells in the middle and right columns. You'd get something like
vars["staticPartOfHyperlink"] + row[TICKETID]
If you'd rather not use a variable, you can hard-code the static part (don't do this, it's ugly and asking for trouble):
"http://google.com/maximo/ui/maximo.jsp?event=loadapp&value=asset&additionaleventvalue=" + row[TICKETID]
Related
I'm working on Google Tag Manager/Analytics for a site, here's an example page that a tag is being fired on:
https://www.forktrucktraders.co.uk/listings/refurbished-combilift-multi-directional-gas/
The tag is fired when the "Send Message" button on the contact form is clicked:
https://imgur.com/a/qTPb3Ci
Right now I've got the event's action returning the URL of the current page the form was sent from, but I'd like to know if it's possible to get the href from the "Visit dealer's website" link on the page, as it would give a faster idea of which dealer the listing is coming from. Probably a long shot to make this happen solely through Tag Manager (if not possibly just a hidden bit of data that just has the dealer's name in on the "Send Message" button) but I'd appreciate any input.
You most certainly can. Off the top of my head something along the lines of the following should work...
It depends on whether you prefer just having the url or breaking it down further.
Just the URL:
Create the following in a custom HTML tag within GTM
<script>
//This selects your desired href:
var dealerURL = document.querySelector(".stm-dealer-image-custom-view a").href;
//This pushes the value into the dataLayer temporarily for use later:
window.dataLayer.push({
event: 'formSubmit',
dealer: dealerURL
})
</script>
Ideally, this should be fired on page load of all your listings pages.
Next create a new User-Defined Variable of the dataLayer var type
within GTM corresponding to dealer, this will store the value to be
pulled through in your event.
Now just change your event action to {{dealer}} (or whatever you
ended up naming the datalayer variable), and this value should be
pulled through in your event.
Getting the dealer name:
Now presuming the href format is always the same across the site you could split this by a delimiter instead:
var dealerURL = document.querySelector(".stm-dealer-image-custom-view a").href;
var dealerSplit = dealerURL.split("/");
var dealer = dealerSplit[4];
The above would leave you with a variable containing the string 'hitec'.
This however is quite prone to breaking if the page path does not always follow the same format, as such it would be better to use RegEx instead.
To answer your specific question, you would need to create a variable to target that specific link element that contains the dealer's website's url. The simplest way is probably to add an id to the <a> element and create a variable in GTM to track it.
I had a quick look at your site and I think you have more problems with the form.
Your even triggers without validating the form, this would lead to extra events.
The event category, action and label could use some work in organizing it to help you analyze the data
You also have a mix of gtag.js and GTM snippet on the page, I would say this is not normal practice, usually, GTM is enough. You can contact me through my profile if you'd like to chat more about it.
So I would like to be able to have a print button for entries in our database so users can print an entry via a print friendly "form".
My thought was to create a separate page, add labels and have those labels pull the relevant information.
I know I can add the open widget information via this code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showPage(app.pages.TestPrint);
But I'm running into a few problems:
I can't get the page to open in a new window. Is this possible?
window.open(app.pages.TestPrint);
Just gives me a blank page. Does the browser lose the widget source once the new window opens?
I can't get the print option (either onClick or onDataLoad) to print JUST the image (or widget). I run
window.print();
And it includes headers + scroll bars. Do I need to be running a client side script instead?
Any help would be appreciated. Thank you!
To get exactly what you'd want you'd have to do a lot of work.
Here is my suggested, simpler answer:
Don't open up a new tab. If you use showPage like you mention, and provide a "back" button on the page to go back to where you were, you'll get pretty much everything you need. If you don't want the back to show up when you print, then you can setVisibility(false) on the button before you print, then print, then setVisibility(true).
I'll give a quick summary of how you could do this with a new tab, but it's pretty involved so I can't go into details without trying it myself. The basic idea, is you want to open the page with a full URL, just like a user was navigating to it.
You can use #TestPrint to indicate which page you want to load. You also need the URL of your application, which as far as I can remember is only available in a server-side script using the Apps Script method: ScriptApp.getService().getUrl(). On top of this, you'll probably need to pass in the key so that your page knows what data to load.
So given this, you need to assemble a url by calling a server script, then appending the key property to it. In the end you want a url something like:
https://www.script.google.com/yourappaddress#TestPage?key=keyOfYourModel.
Then on TestPage you need to read the key, and load data for that key. (You can read the key using google.script.url).
Alternatively, I think there are some tricks you can play by opening a blank window and then writing directly to its DOM, but I've never tried that, and since Apps Script runs inside an iframe I'm not sure if it's possible. If I get a chance I'll play with it and update this answer, but for your own reference you could look here: create html page and print to new tab in javascript
I'm imagining something like that, except that your page an write it's html content. Something like:
var winPrint = window.open('', '_blank', 'left=0,top=0,width=800,height=600,toolbar=0,scrollbars=0,status=0');
winPrint.document.write(app.pages.TestPage.getElement().innerHTML);
winPrint.document.close();
winPrint.focus();
winPrint.print();
winPrint.close();
Hope one of those three options helps :)
So here is what I ended up doing. It isn't elegant, but it works.
I added a Print Button to a Page Fragment that pops up when a user edits a database entry.
Database Edit Button code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showDialog(app.pageFragments.FragmentName);
That Print Button goes to a different (full) Page and closes the Fragment.
Print Button Code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showPage(app.pages.ModelName_Print);
app.closeDialog();
I made sure to make the new Print Page was small enough so that Chrome fits it properly into a 8.5 x 11" page (728x975).
I then created a Panel that fills the page and populated the page with Labels
#datasource.item.FieldName
I then put the following into the onDataLoad for the Panel
window.print();
So now when the user presses the Print Button in the Fragment they are taken to this new page and after the data loads they automatically get a print dialog.
The only downside is that after printing the user has to use a back button I added to return to the database page.
1.
As far as I know, you cannot combine window.open with app.pages.*, because
window.open would require url parameter at least, while app.pages.* is essentially an internal routing mechanism provided by App Maker, and it returns page object back, suitable for for switching between pages, or opening dialogs.
2.
You would probably need to style your page first, so like it includes things you would like to have printed out. To do so please use #media print
ex: We have a button on the page and would like to hide it from print page
#media print {
.app-NewPage-Button1 {
display : none;
}
}
Hope it helps.
1. Here is how it is done, in a pop up window, without messing up the current page (client script):
function print(widget, title){
var content=widget.getElement().innerHTML;
var win = window.open('', 'printWindow', 'height=600,width=800');
win.document.write('<head><title>'+title+'/title></head>');
win.document.write('<body>'+content+'</body>');
win.document.close();
win.focus();
win.print();
win.close();
}
and the onclick handler for the button is:
print(widget.root.descendants.PageFragment1, 'test');
In this example, PageFragment1 is a page fragment on the current page, hidden by adding a style with namehidden with definition .hidden{display:none;} (this is different than visible which in App Maker seems to remove the item from the DOM). Works perfectly...
2. You cannot open pages from the app in another tab. In principle something like this would do it:
var w=window.parent.parent;
w.open(w.location.protocol+'//'+w.location.host+w.location.pathname+'#PrintPage', '_blank');
But since the app is running in frame nested two deep from the launching page, and with a different origin, you will not be able to access the url that you need (the above code results in a cross origin frame access error). So you would have to hard code the URL, which changes at deployment, so it gets ugly very fast. Not that you want to anyway, the load time of an app should discourage you from wanting to do that anyway.
In Tumblr, searches are set up so that the query is a method/parameter of the search controller. Basically it looks like this: /search/:query.
I've been playing around from the client side trying to edit it so that it posts in this format:
/search/example?q=example
I'm doing this because GA looks for a parameter in searches. My problem is is that from the JavaScript to the form methods and actions, I cannot get the thing to spit out a query parameter at the end.
Is there anyway to tell Google to look for /search/:query instead of looking for a parameter in the URI?
Yes, you can do this by creating an advanced filter.
Go to your account Admin and then either click on the Account > All filters button on the left, or else the View > Filters button the right. Which one you use depends on whether you want this to be applied to all properties/views of the account, or only to an individual view.
Then, click the + New Filter button.
Enter in a name for your Filter Name such as "search string"
For filter type, select Custom filter radio button.
Then select the Advanced radio button.
Then from the Field A->Extract A dropdown, select Request URI. In the input field to the right of this, enter in ^\/search\/(.*)
Then from the Output To->Construtor dropdown, select Search Term. In the input field to the right of this, enter in $A1
Then save the filter and you should be good to go.
I have created an outlook add-in where i have a ribbon that adds a button to the appointment tab. This button has a callback method that opens IE and goes to a specific page.
What i need: When you create an appointmnet and ID is stored somewhere(i assume).
I need to get the ID of the appointment that i have opend when i click on my button.
Simplify:
click on an appointment----->appointmnet has a costom button---->click the button--->open a page with the appointmentID.
I need to get the ID and add it to the url paramater when i open the page.
I have been reading up on the appointment global ID here:
http://msdn.microsoft.com/en-us/library/office/ff863645.aspx
And all the links that follow that article but I have not found anything that can help.
Im glad i have friends who know this better than me...
soloution here:
Outlook Ribbon Load Inspector.CurrentItem is null
I have a page (let's say page1) that open the page2 using:
showModalDialog(page2, '', 'dialogWidth:55em; dialogHeight:50em; status:0');
I am facing 2 problem (in this post i am gonna write the first one):
1- i have in page2, several checkboxes that allow autoposback in order to make some changes in the form itself. As i previously mentioned the page2 is opened by the page1 using javascript. So each time i check any of those checkboxes the page open a second form (same as page2 but with the changes)
How can I limit this is the same form?
i am not unkown to showmodalDialog
However in javascript we do like
How do I open a new browser window?
Answer: To open a new browser window, use the window.open() method. For example, the following code opens this page in a new window.
myRef = window.open(''+self.location,'mywin','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');
sName String specifying the name of the new window. This name can be used in the same constructions as the frame name provided in the frame tag within a frameset . For example, you can use hyperlinks of the form , and the hyperlink destination page will be displayed in your new window.
If a window with this name already exists, then window.open() will display the new content in that existing window, rather than creating a new one.
For more info do google search on "javascript open only single window"