On windows after running the grunt build command for creating brackets shell it gives done without errors but i dont see any .exe file generated..
What might be the problem???
Here are some possible solutions:
Are you following the full brackets-shell build instructions, including all prerequisites?
Make sure Brackets isn't running at the same time. The build will fail silently if the .exe file is currently in use (see bug).
Try with a fresh git clone of the repo. If your brackets-shell local copy has been around for a while, sometimes the build & deps folders can get in a bad state. (I'm assuming you haven't modified the source at all. If you have, try with an unmodified copy of the source first to make sure it builds correctly without any of your changes).
Check that python --version shows 2.7.x
Verbose build output would also be helpful in diagnosing issues like this, but unfortunately there's not yet an easy way to get that...
If you follow the instructions on bracket-shell's wiki page, the Windows executable should be created in the Release directory.
Related
I am trying to follow this tutorial. I am running on MacOS Catalina, 10.15.3 , on a 13" Macbook pro from 2016. I downloaded the latest release from here for Mac. I unzipped the file, and moved the zig executable (but not the rest of the contents of the folder) to usr/local/bin so I could call it from anywhere. Now, regardless of where I run it, I can call zig version and get the output 0.6.0+352976ed2 as expected. However, whenever I try something like zig run main.zig or zig build main.zig it just freezes and does nothing.
Now the tutorial does say that it doesn't support zig 0.6.0. But I was assuming that this would still work, and the tutorial was referring more to things like the way to print being changed when it said it doesn't support 0.6.0. Obviously this could be an incorrect assumption, but I don't know why this wouldn't work. And as zig is young, has a shortage of getting started tutorials so I don't know where else to look.
I have gotten zig 0.6.0 to work with homebrew before, but as I am potentially looking at contributing or trying experimental branches of the compiler down the line, I want to be able to run an arbitrary zig executable.
I was able to fix my problem. First I removed zig from usr/local/bin, and any other files associated with the original download. Then instead of downloading the master release, I downloaded the 0.6.0 release for mac. I unzipped it. I tried compiling with it directly from there, and it worked. However when I moved it to usr/local/bin it gave me the error,
Unable to find zig lib directory
so clearly the executable needed to be with the rest of the folder's contents, where I replaced the executable.
I created a new directory in my home directory that I named tools. I moved the unzipped folder (called zig-macos-x86_64-0.6.0) into the tools directory. Then (from my home directory) I created a symlink to the binary in my bin using this command.
ln -s tools/zig-macos-x86_64-0.6.0/zig ../../usr/local/bin/zig
I quit and restarted terminal. Now zig version produces 0.6.0 and when compiling the program main.zig,
const std = #import("std");
pub fn main() void {
std.debug.warn("Hello, {}!\n", .{"World"});
}
using the command zig run main.zig I get the proper output of
Hello, World!
I am trying to follow this tutorial, in order to install the Nix package manager in my home directory instead of /nix.
I am doing the PRoot installation (see 2. in tutorial). At the end, the
tutorial proposes to be smart in Building native packages section, to be
able to run packages without PRoot:
To run packages natively (without PRoot) they have to be build from source because all paths to the nix store are hard-coded. It is simple, really:
mkdir $HOME/nix
nix-channel --update
env NIX_STORE_DIR=$HOME/nix nix-env -i nix
And now your Nix store gets built up using the new paths. The built binaries can be run directly from there.
I did that, but I don't see how it frees me from PRoot. If I don't do the /nix mounting point with PRoot, nothing works (no nix-env executable,
I can't install new packages).
Should this NIX_STORE_DIR environment variable be put in my .bashrc ?
It seems I always need to run PRoot because ~/.nix-profile points to
a /nix/... directory:
.nix-profile -> /nix/var/nix/profiles/default
There are more steps in the tutorial (5., 6.) - should I follow them ? It seems they apply only in case of using the manual installation (step 4.),
although it is not explicit.
Any help would be appreciated :)
For anyone stumbling on this old question: there is no currently supported way to install Nix without root. The above wiki was moved to https://nixos.wiki/wiki/Nix_Installation_Guide . It may well be out of date. PRoot could work, but even then, rebuilding the whole store at a different path is not a good idea, not the least because the binary caches won't help and you'll need to build everything.
I suggest trying Nix in a virtual machine or cloud server.
Future people from Google, it's still unsupported but does work. Script here that installs a couple dependencies, builds a temporary Nix, and uses that to install a proper version in your directory of choice.
I'm trying to get PyQt5 working with WinPython. PyQt5 comes with a readme file for installation, and I have unsuccessfully tried a few combinations of what I thought the first part of the readme tells me to do.
I have:
Windows 7 Home Premium 64-bit
WinPython-64bit-2.7.9.1
Qt 5.4
PyQt-gpl-5.4
PyQt-gpl-5.4 is in the folder (only partially sure that this is where I should have put it)
C:\WinPython-64bit-2.7.9.1\python-2.7.9.amd64\Lib\site-packages\PyQt-gpl-5.4
My current attempt at getting everything working is: I'm trying to run the configure.py file in PyQt-gpl-5.4, but when I do so I consistently get the following error:
Error: PyQt5 requires Qt v5.0 or later. You seem to be using v4.8.6.
Make sure the correct version of qmake is on your PATH.
What I think is the required version of qmake being referred to is in the folder
C:\Qt\5.4\mingw491_32\bin
However, I have no idea how to fix the error by adding the qmake in this folder to PATH. My most recent attempt was to add the folder using Spyder's Tools->PYTHONPATH manager, but this made no difference. I also tried adding it using sys.path.append('C:\Qt\5.4\mingw491_32\bin'), but this didn't work either. I have since removed the folder name from both of these locations.
How do I get PyQt5 working with WinPython-64bit-2.7.9.1, or I think equivalently, how to I get the configure.py file in the PyQt-gpl-5.4 folder to run?
Thanks.
You definitely don't want the source code (i.e. PyQt-gpl-5.4) in the site-packages folder, because that's where the compiled modules will end up. Instead, it should just go in a temporary folder whilst you compile it.
When you run configure.py, you must take care to use the executable for the specific python that you are targeting. I do not know anything about WinPython, but for a normal python installation this means doing something like this:
C:\Python34\python configure.py
As a first step, before attempting to actually compile anything, it would be advisable to take at look at all the configuration options that are available, like this:
C:\Python34\python configure.py --help
(There's also the Installing PyQt5 section in the PyQt Docs).
This will tell you, for instance, that the simplest way to specify the Qt installation you are targeting would be something like this:
C:\Python34\python configure.py --qmake C:\Qt\5.4\mingw491_32\bin\qmake
EDIT:
Sorry, that last part is wrong: the --qmake option isn't available on Windows, so you have to add the directory containing the qmake executable to your PATH. This can be done with the following command:
set PATH=%PATH%;C:\Qt\5.4\mingw491_32\bin
I followed all the step is mention in given below url to build my project( I am using win7 OS).
https://github.com/adobe/brackets-shell/wiki/Building-brackets-shell.
actullly i want to create brackets installer (installed wix 3.7).
but i am getting cef-extract failed error.
even though i also used grunt cef-extract --force.
after that its throunging new error.
create -project failed after that i am not able to process further.
can some one help me.
thanks in advanced.
Regards
ashish .
If you include the exact console output you're seeing, it would be much easier to help you. But based on snags other people have encountered recently, you can try these things:
Make sure your PATH includes Python 2.7 (otherwise "create-project" will fail).
Delete all these folders to be sure you're starting from a clean slate: deps, Debug, include, libcef_dll, Release, Resources.
Just run the high-level tasks grunt setup and grunt build, following the Building brackets-shell instructions. (There's a known bug where grunt cef-extract fails when run standalone).
I am trying to compile Network.HTTP (http://hackage.haskell.org/package/network) on win32/cygwin. However, it does fail with following message:
Setup.hs: Missing dependency on a foreign library:
* Missing (or bad) header file: HsNet.h
This problem can usually be solved by installing the system package that
provides this library (you may need the "-dev" version). If the library is
already installed but in a non-standard location then you can use the flags
--extra-include-dirs= and --extra-lib-dirs= to specify where it is.
If the header file does exist, it may contain errors that are caught by the C
compiler at the preprocessing stage. In this case you can re-run configure
with the verbosity flag -v3 to see the error messages.
Unfortuntely it does not give more clues. The HsNet.h includes sys/uio.h which, actually should not be included, and should be configurered correctly.
Don't use cygwin, instead follow Johan Tibells way
Installing MSYS
Install the latest Haskell Platform. Use the default settings.
Download version 1.0.11 of MSYS. You'll need the following files:
MSYS-1.0.11.exe
msysDTK-1.0.1.exe
msysCORE-1.0.11-bin.tar.gz
The files are all hosted on haskell.org as they're quite hard to find in the official MinGW/MSYS repo.
Run MSYS-1.0.11.exe followed by msysDTK-1.0.1.exe. The former asks you if you want to run a normalization step. You can skip that.
Unpack msysCORE-1.0.11-bin.tar.gz into C:\msys\1.0. Note that you can't do that using an MSYS shell, because you can't overwrite the files in use, so make a copy of C:\msys\1.0, unpack it there, and then rename the copy back to C:\msys\1.0.
Add C:\Program Files\Haskell Platform\VERSION\mingw\bin to your PATH. This is neccesary if you ever want to build packages that use a configure script, like network, as configure scripts need access to a C compiler.
These steps are what Tibell uses to compile the Network package for win and I have used this myself successfully several times on most of the haskell platform releases.
It is possible to build network on win32/cygwin. And the above steps, though useful (by Jonke) may not be necessary.
While doing the configuration step, specify
runghc Setup.hs configure --configure-option="--build=mingw32"
So that the library is configured for mingw32, else you will get link or "undefined references" if you try to link or use network library.
This combined with #Yogesh Sajanikar's answer made it work for me (on win64/cygwin):
Make sure the gcc on your path is NOT the Mingw/Cygwin one, but the
C:\ghc\ghc-6.12.1\mingw\bin\gcc.exe
(Run
export PATH="/cygdrive/.../ghc-7.8.2/mingw/bin:$PATH"
before running cabal install network in the Cygwin shell)