I have RouteConfig
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "EmployerDefault",
url: "{lang}/employer",
defaults: new { lang = "ru", controller = "Employer", action = "Index" }
);
}
}
and Controller
public class EmployerController : Controller
{
public ActionResult Index()
{
return View("EmployerMaster");
}
}
When i go to link /employer , i get HTTP 404.0 - Not Found ,
but when i try to get /ru/employer it's OK.
I want that /employer and /ru/employer links refer to one page.
Why it's happens ? How can i fix that ?
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "EmployerDefault",
url: "/employer",
defaults: new { lang = "ru", controller = "Employer", action = "Index" }
routes.MapRoute(
name: "EmployerWithLang",
url: "{lang}/employer",
defaults: new { lang = "ru", controller = "Employer", action = "Index" }
);
}
}
Related
I cannot get the HttpContext.Current.GetOwinContext().Authentication.Challenge to work extending a ApiController it just doesnt do anything, not even an error. I just get the output ":("
What am i doing wrong can this even be achieved? this is a Web API and the Controller RegisterRoutes is causing problems with my custom routes
It works fine when I extend Controller
public class AccountController : Controller
{
public void SignIn()
{
// Send an OpenID Connect sign-in request.
if (!Request.IsAuthenticated)
{
HttpContext.GetOwinContext().Authentication.Challenge(new AuthenticationProperties { RedirectUri = "/" }, OpenIdConnectAuthenticationDefaults.AuthenticationType);
}
}
}
It does not work when i extend ApiController
[RoutePrefix("api/auth")]
public class AuthController : ApiController
{
[HttpGet, Route("signin")]
public IHttpActionResult SignIn()
{
if (User == null || User.Identity.IsAuthenticated == false)
{
HttpContext.Current.GetOwinContext().Authentication
.Challenge(new AuthenticationProperties() {RedirectUri = "/"}, OpenIdConnectAuthenticationDefaults.AuthenticationType);
return Ok(":(");
}
return Ok(":)");
}
}
This wont allow my ApiController routing to work
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new {controller = "Home", action = "Index", id = UrlParameter.Optional}
);
}
I have overridden a default route in my routes configuration :
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.MapRoute("MyController_OverriddenAction",
"MyController/OverriddenAction",
new { controller = "MyOverriddenController", action = "OverridenAction" },
new[] { "Plugin" }
);
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "home", action = "Index", id = UrlParameter.Optional }
);
}
}
If I call MyController/OverriddenAction, the overridden action OverriddenAction in MyOverriddenController is displayed. It works.
But if I call #Html.Action("OverriddenAction", "MyController"), the default route is called.
Why? What is the solution?
My controllers :
public class MyOverridenController : Controller
{
public ActionResult OverriddenAction()
{
return Content("overridden");
}
}
public class MyController : Controller
{
public ActionResult OverriddenAction()
{
return new EmptyResult();
}
[...]
}
You should use following syntax
#Html.Action("OverriddenAction", "MyOverriden")
while calling the method directly like MyController/OverriddenAction it looks for the entry in MapRoute. However, while using #Html.Action you should use the actual controller name.
I have the following in my RouteConfig:
public class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{caseID}",
defaults: new { controller = "Generator", action = "Index", caseID = UrlParameter.Optional }
);
}
}
And my ActionResult method:
public ActionResult Index(string caseID) {
//some code
var currentcase = new Something.Read(caseID);
//some other code
return View(model);
}
My url looks like localhost/Generator/Index/dee7aff5-0a34-4965-936f-a08f1dae5c43
Now my caseID should be "dee7aff5-0a34-4965-936f-a08f1dae5c43" but it is null and i can't figure out why.
Can anyone help me?
UPDATE
If the url is
localhost/Generator/Index/?caseID=dee7aff5-0a34-4965-936f-a08f1dae5c43
instead of
localhost/Generator/Index/dee7aff5-0a34-4965-936f-a08f1dae5c43
it runs well.
Replace CaseID with id in your route.config file hopefully it will work.And in your action as well with id
I have an asp.net web site that won't seem to resolve to Default.aspx when initially loading. When I debug on my local machine it loads Default no problem. Unless I try to navigate to "localhost:#####/". Then it gives a 404 error. When I deploy it to a staging server, give it a virtual path "mywebapp", and load it from "mydomain.com/mywebapp" it gives a 404 as well. I have set Default.aspx to the top of the list for Default Document in IIS. If I navigate to "mydomain.com/mywebapp/default" the site loads just fine. Any suggestions? I would paste code but it is a large website and I quite honestly am not sure what I'm looking for anymore.
EDIT:
In my site I am also using DataTables for display and edit of data. In the ajax calls I was previously able to call the controller by using urls such as:
api/MyController/idvalue
but since uncovering this I had to go back and preface the urls to get them to work:
mywebapp/api/MyController/idvalue
Controller:
public class MyController : ApiController
{
[Route("api/MyContoller/{idvalue}")]
[HttpGet]
[HttpPost]
public IHttpActionResult MyControllerMethod(intidvalue)
{
}
}
WebApiConfig:
public static class WebApiConfig
{
public static void Register(HttpConfiguration config)
{
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
}
RouteConfig:
public static class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
var settings = new FriendlyUrlSettings();
settings.AutoRedirectMode = RedirectMode.Permanent;
routes.EnableFriendlyUrls(settings);
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
//routes.MapRoute(
// name: "Default",
// url: "{controller}/{action}/{id}",
// defaults: new { action = "Index", id = UrlParameter.Optional }
// );
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
}
Found the solution. In my RouteConfig.cs if I comment out the line:
controller = "Home",
it works just fine.
public static class RouteConfig
{
public static void RegisterRoutes(RouteCollection routes)
{
var settings = new FriendlyUrlSettings();
settings.AutoRedirectMode = RedirectMode.Permanent;
routes.EnableFriendlyUrls(settings);
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
//routes.MapRoute(
// name: "Default",
// url: "{controller}/{action}/{id}",
// defaults: new { action = "Index", id = UrlParameter.Optional }
// );
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new
{
//controller = "Home",
action = "Index",
id = UrlParameter.Optional
}
);
}
}
However, I'm not completely sure why this is. So if anyone is able to explain it to me that would be great!
I am working on an ASP.NET MVC app. I am trying to create a basic API. I created my first Web API controller by right-clicking on Controllers, Add -> Controller... then choosing "Web API 2 Controller - Empty". In the controller code, I have the following:
namespace MyProject.Controllers
{
public class MyApiController : ApiController
{
public IHttpActionResult Get()
{
var results = new[]
{
new { ResultId = 1, ResultName = "Bill" },
new { ResultId = 2, ResultName = "Ted" }
};
return Ok(results);
}
}
}
When I run the app, I enter http://localhost:61549/api/myApi in the browser's address bar. Unfortunately, I get a 404. I'm just trying to create an API endpoint that returns a hard-coded set of JSON objects. I need this to test some client-side JavaScript. What am I doing wrong?
Here are how my routes are registered:
WebApiConfig.cs
public static void Register(HttpConfiguration config)
{
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
RouteConfig.cs
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
}
Make sure that you have the WebApiConfig registration being called, possibly in the Global.asax Application_Start() method. Something like:
protected void Application_Start()
{
AreaRegistration.RegisterAllAreas();
WebApiConfig.Register(GlobalConfiguration.Configuration);
FilterConfig.RegisterGlobalFilters(GlobalFilters.Filters);
RouteConfig.RegisterRoutes(RouteTable.Routes);
BundleConfig.RegisterBundles(BundleTable.Bundles);
}
You did not add method name at the end of call. Try this one:
http://localhost:61549/api/myapi/get
Try this approach
namespace MyProject.Controllers
{
public class MyApiController : ApiController
{
public IHttpActionResult Get()
{
var results = new List<ResultModel>
{
new ResultModel() {ResultId = 1, ResultName = "Bill"},
new ResultModel() {ResultId = 2, ResultName = "Ted"}
};
return Ok(results);
}
}
public class ResultModel
{
public int ResultId { get; set; }
public string ResultName { get; set; }
}
}
Api: http://localhost:61549/api/MyApi/get
Hope this helps.