I have around 20 websites created a single web-server, now i have made a tool which will be common for all the websites, so i have a common user-control, which i am using on .aspx file inside all the website
Now i want to keep these user-controls in a location outside the website directory so that i can access these same control to all the websites.However i cannot find a way to get the directory outside the website's root directory. I googled around and saw the option to make the directory as virtual one, so that it will be accessible to the site, but here i would have to link the folder to one website at a time, so it would be same keeping controls in separate websites, which i want to avoid for update reasons.Can anyone tell me how can i achieve this.
Hi In rough unchecked code something like:
You can access like this.
webRootPath = Server.MapPath("~")
docPath = Path.GetFullPath(Path.Combine(rootPath, "..\Documents/MyDocument.xml"))
Related
I am having trouble accessing information on the server my website it on. As the website was originally programmed with VB.Net, I cannot change the language without having to completely reboot the website. The way the website and server are configured, I can only use ASP.Net and VB.Net.
I am needing to add a section where they can create folders, edit folder names, and upload pictures and text documents on the server through the public website. I tried using parts of the FileIO, Server, and Http that should have worked, but none of them did. Most of my research is about local files and text documents.
I have not been able to find any information that works. Can someone help me? Thank you.
Firstly, creating a virtual directory in ISS mapped to somewhere on your disk would be a good start. This way you have a separate folder for user data in a folder with write access (make sure IIS has write access to the folder!), and the folder is not affected by website deployments.
Secondly, you might need to resolve absolute path for most of the System.IO.File calls. See How to convert a relative path to an absolute path in a Windows application?, just you will need to convert this code to VB.
Using FileZilla, I can access folders that are outside my web directory. How can I do the same with Dreamweaver so that I can edit the files and automatically save/upload all through Dreamweaver? I currently can only access the web directory.
I know how to include them with PHP, but I would like Dreamweaver to find/access them.
Thank you!
You would have to set the Site Definition (both local and remote) paths to look one level higher than you currently have it. So if the local path is
My Documents/Web Sites/This Site
you would change it to
My Documents/Web Sites/
and if the remote is:
/user/home/domain.com/
change to
/user/home/
The problem you are going to run into is that Dreamweaver doesn't work well when set like this. It assumes the Remote path is the public web root and will create all sorts of files and folders there automatically and DW expects those to be in the public root. Also, things like setting paths to includes and images automatically will start to not work as all paths will start outside of the public web root.
Best to leave it as it is and use an external FTP program to handle the files outside of the web site.
We've bumped up against this situation previously where the desire was to have the PHP include files be moved outside the public HTML directory. JCL1178's answer is absolutely conceptually correct.
The actual implementation was to duplicate the site (under "Manage Sites") and essentially create a separate site for the "includes" directory that would go one level up. So the "Root Directory" setting was normal (in our case "public_html/" in the main site and we removed "public_html/" from the Root Directory setting in the "includes" site, effectively causing the path to go one level up.
Definitely not an ideal situation/workflow, to say the least, as you'll end up with two site definitions for one site (which can cause other issues); but Dreamweaver is what it is. We were working on a project offsite that did not allow for anything other than Dreamweaver to be used, so this is what we came up with to comply.
As an added note: we were only able to implement this solution because the webhosting plan allowed us to get to the root. If you're on a webhosting plan that is strictly limited to the public directory, the whole thing will be DOA.
I am working with two different web sites in asp.net. In the first project i upload some images to a specific folder under the project root and save just the filename in the database, now i am trying to display this images at some page of the second project I know the filename from the database and the image folder as absolute pat but I have not been able to display the image, even thought when looking in firebug the image src is correct src="D:/MyFolder/image.jpg" the image does not display, probably because it is not pointing in the right directory.
I have also tried using Server.MapPath and then my D location but still no success.
I am sure someone has faced the same situation before and was really hoping to get some hint to manage this.
Thank you in advance
I found my solution, strange but i didn't catch it before. Uploaded pictures under a project can always be accessed using the url of the project http://www.yourwebsite.com/images/photo.png now in the second project you can use reference the images using this url and concatenating the file name which i store on database. I think this is the best solution and without changing the code access security which i think can bring other problems with it. Anyway thank you guys.
If you want to display the image that is not in your project (I mean it is present in some other project or some other drive) just create the virtual directory in IIS
Go to "Run", type inetmgr
Right click on your project and add virtual directory
Give alias name and path so that it acts like folder in your project
I don't think you can serve files outside of your application path by default. It's called Code Access Security. You can read up on it here:
http://msdn.microsoft.com/en-us/library/930b76w0.aspx
You can fix this by changing your trust level to High in your web.config:
http://msdn.microsoft.com/en-us/library/tkscy493.aspx
I wouldn't recommend doing this for any site that is externally accessible. In fact, depending on how/where you're hosting your application, this option may be restricted.
You can only "link" to files that exist relative to the same project or are hosted on another site via an absolute URL.
If you want to service files outside the application/website (on disk or in a database) you will need to build a mechanism that gets the file and binary writes it to the browser, setting the MIME type etc. This is best done using an HttpHandler.
edit I do not want to redirect pages, specific files etc. I would like to change the path where images, videos and other media are stored from the root source directory to the directory of my choosing. In this case c:/dev/prjfiles/prjname/public (c:/dev/prjfiles/prjname/ is my working directory) and i except when my html does img src="/pic.png" it will find the image in c:/dev/prjfiles/prjname/publi/pic.png. I need a working solution, i tried looking at how to set virtual directories and etc. I cant figure it out. Thus the bounty. I am generating the html, i am not writing asp:image runat="server" etc i am pulling data from a DB and outputing the html. The part that is still a WIP is the code that handles POST request. The html already exist but i cant have hundreds of files in site.com/here pollution my source directory (c:/dev/trunk/thisprj/thisprj/where my .aspx files are and i do not wish 500 .png/gif/jpg here)
I dont know how asp.net environments are usually set up. I am assuming i have a root path that is not available from the web, a bin/ where i may put my asp.net dll and a public where i stick in any files i want.
I would like to have my project files seperated from everything else. My JS, css and image files are in prjfiles/prjname/public with my sqlite db in prjfiles/prjname/ and extra binaries in prjfiles/prjname/bin.
The problem comes when i run my app and try to load an image. Such as /cssimg/error.png. My project does not find resource in my /public folder and i have no idea how to make it find them. How can i set my project up so it does?
NOTE: I set the working directory path so its at prjfiles/prjname/. In code i write ./bin/extrabin.exe and db.sqlite3 which access the files properly.
You might want to watch the getting started videos for ASP.NET
http://www.asp.net/get-started/
EDIT: More info added
As #Murph suggests, your assumptions are incorrect.
IIS takes care of blocking HTTP access to any important files and folders like your *.aspx.cs, and *.cs in the App_Code, any DLLs, anything under the App_Data directory and the web.config.
Content files, such as *.html, *.css, *.js, .gif, .jpg, .png are all served in the normal manner.
In this way, there is no need for a "public" folder.
I dont know how asp.net environments are usually set up. I am assuming i have a root path that is not available from the web, a bin/ where i may put my asp.net dll and a public where i stick in any files i want.
This is wrong assumption!
You have a root folder, which IS available in public. You set IIS or ASP.NEt Development Server to this folder.
(optional, but always needed) You have a web.config file in this root folder for configuration
You have a bin folder for your assemblies (each page or user control "include" compiles to a class)
(optional) You have App_Data as default folder for file-based DBs and/or other data files (say XML storage, ..)
(optional) You have an App_theme folder for styling and images. Read about ASP.NET themes.
(optional) You can add App_Code folder if you want to add classes to be compiled by the server.
You can create folders for scripts, etc...
Normally for complex logic, etc.. you create in a separate project outside the root and reference the result assembly in the bin folder.
Seriously, you cannot do ASP.NET work without an IDE or a manual. Visual Web Developer 2008 Express IDE is free and http://asp.net has tons of resources for getting started.
I don't know if I got the question right, but maybe you could try the <BASE> HTML tag.
HTML <base> Tag
"Specify a default URL and a default target for all links on a page"
There's a nice and simple example at W3Schools, check it out.
The negative side is that you need to put a <BASE> tag in each page you want.
It sounds like you should be able to create a virtual directory to do what you're asking -- but it's a very non-standard setup.
Keep in mind that IIS will prevent users from downloading DLLs and other project-level files, so you usually don't need to partition them off in a separate layer.
For example, just have a cssimg folder at the top level of your project, and skip the whole public folder thing.
I see where you're coming from. ASP.NET projects are set up a little differently from how you're treating them, but you can make them work like you want.
The root of an ASP.NET project IS publicly accessible. When you created your WebSite within Visual Studio, it created a default.aspx page right on the root. Are you hosting in IIS? If so, it's set up to serve up default.aspx by default. But I digress.
Here's how to make it work like you want (mostly):
Create a WebSite, then right-click the site and add a folder named "prjfiles". Right-click that folder and make another named "public". Create another subfolder of that one called "cssimg".
Now, if you want to use the image you mentioned, you'd reference it like this: "~/prjfiles/public/cssimg/error.png" (pathing starting with the root) or "./cssimg/error.png" if you're coming from a page in the public folder (relative pathing).
Really, though, you're doing too much work. Here's how to make it work with less effort:
Create your WebSite, right-click the project and add a folder called "cssimg".
Treat the root as you would the "public" folder- put your pages right there on the root or in subfolders, as needed. You can reference that same image file like this now: "./cssimg/error.png" (relative) or "~/cssimg/error.png" (start from root)
There's also another way to tell the engine where to look for resources, but it's for your css files. Inside the "head" tag, you can add a "style" element (with type="text/css") and inside that you can add something like this: #import '<%= ResolveUrl("~/prjfiles/public/cssimg/styles.css") %>';
Good luck!
If I correctly understood your problem, you're trying to find files which aren't physically stored on a filesystem folder, or stay on a different folder. You can deal with this problems by implementing a UrlRewrite mechanism.
I suggest you to read URL Rewriting in ASP.NET and, after, to take a look into this implementation: A Complete URL Rewriting Solution for ASP.NET 2.0.
If I understand all this correctly (please comment with any correction) right now all your files are together in the root directory and you use <img src="/img.png" /> and it works.
If this is the case, make another directory in the directory the images are in, say call that directory images and put the image files there. now use <img src="/images/img.png" />.
Done.
Say I have a directory structure like so:
/public
/public/company
/public/globals
/public/globals/images
/public/jobs
/public/jobs/it
... etc.
What I would like to do is to be able to configure an IIS Site to load from /public/company when visiting the domain root. I know I can change the site to /public/company, but if I do that, I can't seem to reference the /public/globals directory to obtain images, videos, and other items used across the site.
The other problem is accessing /public/jobs with a domain/jobs url... although I suppose virtual directories can help there, but then I would assume that I would still run into problems trying to access /public/globals for images and other things.
Any ideas? Am I not doing this right? I'm used to using Apache... obviously a very different environment...
Create a Default.aspx page in the root, and on that page, run this:
Response.Redirect("~/public/company/destination.aspx");
I seemed to have found the answer. I set the default path of the Site to /public/company, and created a Virtual Directory called "globals" that points to /public/globals. Now I can reference images via the Virtual Directory like so:
<img src="/globals/images/awesome.png" />
I suppose I just need to create virtual directories for everything under the sun for the rest of the site then.