I wrote a function for recursive subtraction in lisp, but when i load it and run the function with numbers for example ( subtract 4 3 ) the output is -3 which I do not understand why.
(defun subtract (x y)
(if (eq y 0)
x
(- 1 (subtract x (- y 1) ) ) ) )
First, don't use eq to compare numbers. It accidentally works in this case, because your numbers happen to be small. Either use =, or (since you're looking for zero) zerop.
Second, you can use (trace subtract) to see a trace of invocations and return values.
Third, (- 1 x) and (- x 1) have, in the general case, very different values.
Here's a fixed version of your code:
(defun subtract (x y)
(if (zerop y)
x
(subtract (1- x) (1- y))))
Notice that in the recursive call we subtract 1 from both x (to actually decrement the number) and y (to get it closer to the base case, 0).
I am trying to combine two lists of x coordinates and y coordinates into pairs in scheme, and I am close, but can't get a list of pairs returned.
The following can match up all the pairs using nested loops, but I'm not sure the best way to out put them, right now I am just displaying them to console.
(define X (list 1 2 3 4 5))
(define Y (list 6 7 8 9 10))
(define (map2d X Y)
(do ((a 0 (+ a 1))) ; Count a upwards from 0
((= a (length X) ) ) ; Stop when a = length of list
(do ((b 0 (+ b 1))) ; Count b upwards from 0
((= b (length Y) ) ) ; Stop when b = length of second list
(display (cons (list-ref X a) (list-ref Y b))) (newline)
))
)
(map2d X Y)
I am looking to have this function output
((1 . 6) (1 . 7) (1 . 8) ... (2 . 6) (2 . 7) ... (5 . 10))
I will then use map to feed this list into another function that takes pairs.
Bonus points if you can help me make this more recursive (do isn't 'pure' functional, right?), this is my first time using functional programming and the recursion has not been easy to grasp. Thanks!
The solutions of Óscar López are correct and elegant, and address you to the “right” way of programming in a functional language. However, since you are starting to study recursion, I will propose a simple recursive solution, without high-level functions:
(define (prepend-to-all value y)
(if (null? y)
'()
(cons (cons value (car y)) (prepend-to-all value (cdr y)))))
(define (map2d x y)
(if (null? x)
'()
(append (prepend-to-all (car x) y) (map2d (cdr x) y))))
The function map2d recurs on the first list: if it is empty, then the cartesian product will be empty; otherwise, it will collect all the pairs obtained by prepending the first element of x to all the elements of y, with all the pairs obtained by applying itself to the rest of x and all the elements of y.
The function prepend-to-all, will produce all the pairs built from a single value, value and all the elements of the list y. It recurs on the second parameter, the list. When y is empty the result is the empty list of pairs, otherwise, it builds a pair with value and the first element of y, and “conses” it on the result of prepending value to all the remaining elements of y.
When you will master the recursion, you can pass to the next step, by learning tail-recursion, in which the call to the function is not contained in some other “building” form, but is the first one of the recursive call. Such form has the advantage that the compiler can transform it into a (much) more efficient iterative program. Here is an example of this technique applied to your problem:
(define (map2d x y)
(define (prepend-to-all value y pairs)
(if (null? y)
pairs
(prepend-to-all value (cdr y) (cons (cons value (car y)) pairs))))
(define (cross-product x y all-pairs)
(if (null? x)
(reverse all-pairs)
(cross-product (cdr x) y (prepend-to-all (car x) y all-pairs))))
(cross-product x y '()))
The key idea is to define an helper function with a new parameter that “accumulates” the result while it is built. This “accumulator”, which is initialized with () in the call of the helper function, will be returned as result in the terminal case of the recursion. In this case the situation is more complex since there are two functions, but you can study the new version of prepend-to-all to see how this works. Note that, to return all the pairs in the natural order, at the end of the cross-product function the result is reversed. If you do not need this order, you can omit the reverse to make the function more efficient.
Using do isn't very idiomatic. You can try nesting maps instead, this is more in the spirit of Scheme - using built-in higher-order procedures is the way to go!
; this is required to flatten the list
(define (flatmap proc seq)
(fold-right append '() (map proc seq)))
(define (map2d X Y)
(flatmap
(lambda (i)
(map (lambda (j)
(cons i j))
Y))
X))
It's a shame you're not using Racket, this would have been nicer:
(define (map2d X Y)
(for*/list ([i X] [j Y])
(cons i j)))
I am brand new to Scheme and am working on an assignment to implement stochastic gradient descent. So far I believe I have the structure of the program correct however my procedure that takes the derivative of a function f(x) is giving me some trouble. In my "try" loop at the bottom of the code I recursively call (try (func-eval guess)) where (func-eval guess) calculates the next guess of my function's local minimal with the formula *x - alpha*f'(x)* where alpha = 0.1.
I seem to be getting an error when calculating the derivative... I am using Dr.Racket IDE and it has highlighted this following line as being problematic:
(f (+ x dx)) ... which is the second line in my local derivative procedure:
(define (local-minimal first-guess)
;A way to check a guess
(define(good-enough? val1 val2)
(<(abs(- val1 val2)) 0.00001))
; x_new = x_old - alpha*f'(x) /// f(x)=(x+1)^2+2 //// alpha = 0.1
(define (func-eval x)
(- x (* 0.1((derivative (+ 2(expt (+ x 1) 2)) 0.00001)x))))
(define (derivative f dx)
(lambda (x)
(/ (- (f (+ x dx)) (f x))
dx)))
; trys the guess
(define (try guess)
(if (good-enough? guess -1)
guess
(try (func-eval guess))))
(try first-guess))
I am getting an error saying:
application: not a procedure;
expected a procedure that can be applied to arguments
given: 3
arguments...:
-1.99999
Is this a syntax error? I thought that I would be able to say f(x+dx) by using (f (+ x dx)) .... does this mean that I need to put an operator before the f in those parenthesis?
The highlighting and error message are together telling you something useful: the thing derivative is receiving as its first argument f isn't a function, which it needs to be to called in (f (+ x dx)). Where does the argument come from? We could run DrRacket's debugger, but here we can just look at the code -- the only place derivative is called from is the first line of func-eval, so that's where we must have passed a number instead of a function. Sure enough, (+ 2 (expt (+ x 1) 2)) (with x bound) is just a number, and trying to apply this gives an error.
When calling derivative, the first argument has to be a function. In the following procedure call, the expression in the first argument gets evaluated to a number, not a function:
(derivative (+ 2 (expt (+ x 1) 2)) 0.00001)
To fix it, pack the expression inside a lambda, which makes it an actual function:
(derivative (lambda (x) (+ 2 (expt (+ x 1) 2))) 0.00001)
I'm in a Scheme class and I was curious about writing a recursive function without using define. The main problem, of course, is that you cannot call a function within itself if it doesn't have a name.
I did find this example: It's a factorial generator using only lambda.
((lambda (x) (x x))
(lambda (fact-gen)
(lambda (n)
(if (zero? n)
1
(* n ((fact-gen fact-gen) (sub1 n)))))))
But I can't even make sense of the first call, (lambda (x) (x x)): What exactly does that do? And where do you input the value you want to get the factorial of?
This is not for the class, this is just out of curiosity.
(lambda (x) (x x)) is a function that calls an argument, x, on itself.
The whole block of code you posted results in a function of one argument. You could call it like this:
(((lambda (x) (x x))
(lambda (fact-gen)
(lambda (n)
(if (zero? n)
1
(* n ((fact-gen fact-gen) (sub1 n)))))))
5)
That calls it with 5, and returns 120.
The easiest way to think about this at a high level is that the first function, (lambda (x) (x x)), is giving x a reference to itself so now x can refer to itself, and hence recurse.
The expression (lambda (x) (x x)) creates a function that, when evaluated with one argument (which must be a function), applies that function with itself as an argument.
Your given expression evaluates to a function that takes one numeric argument and returns the factorial of that argument. To try it:
(let ((factorial ((lambda (x) (x x))
(lambda (fact-gen)
(lambda (n)
(if (zero? n)
1
(* n ((fact-gen fact-gen) (sub1 n)))))))))
(display (factorial 5)))
There are several layers in your example, it's worthwhile to work through step by step and carefully examine what each does.
Basically what you have is a form similar to the Y combinator. If you refactored out the factorial specific code so that any recursive function could be implemented, then the remaining code would be the Y combinator.
I have gone through these steps myself for better understanding.
https://gist.github.com/z5h/238891
If you don't like what I've written, just do some googleing for Y Combinator (the function).
(lambda (x) (x x)) takes a function object, then invokes that object using one argument, the function object itself.
This is then called with another function, which takes that function object under the parameter name fact-gen. It returns a lambda that takes the actual argument, n. This is how the ((fact-gen fact-gen) (sub1 n)) works.
You should read the sample chapter (Chapter 9) from The Little Schemer if you can follow it. It discusses how to build functions of this type, and ultimately extracting this pattern out into the Y combinator (which can be used to provide recursion in general).
You define it like this:
(let ((fact #f))
(set! fact
(lambda (n) (if (< n 2) 1
(* n (fact (- n 1))))))
(fact 5))
which is how letrec really works. See LiSP by Christian Queinnec.
In the example you're asking about, the self-application combinator is called "U combinator",
(let ((U (lambda (x) (x x)))
(h (lambda (g)
(lambda (n)
(if (zero? n)
1
(* n ((g g) (sub1 n))))))))
((U h) 5))
The subtlety here is that, because of let's scoping rules, the lambda expressions can not refer to the names being defined.
When ((U h) 5) is called, it is reduced to ((h h) 5) application, inside the environment frame created by the let form.
Now the application of h to h creates new environment frame in which g points to h in the environment above it:
(let ((U (lambda (x) (x x)))
(h (lambda (g)
(lambda (n)
(if (zero? n)
1
(* n ((g g) (sub1 n))))))))
( (let ((g h))
(lambda (n)
(if (zero? n)
1
(* n ((g g) (sub1 n))))))
5))
The (lambda (n) ...) expression here is returned from inside that environment frame in which g points to h above it - as a closure object. I.e. a function of one argument, n, which also remembers the bindings for g, h, and U.
So when this closure is called, n gets assigned 5, and the if form is entered:
(let ((U (lambda (x) (x x)))
(h (lambda (g)
(lambda (n)
(if (zero? n)
1
(* n ((g g) (sub1 n))))))))
(let ((g h))
(let ((n 5))
(if (zero? n)
1
(* n ((g g) (sub1 n)))))))
The (g g) application gets reduced into (h h) application because g points to h defined in the environment frame above the environment in which the closure object was created. Which is to say, up there, in the top let form. But we've already seen the reduction of (h h) call, which created the closure i.e. the function of one argument n, serving as our factorial function, which on the next iteration will be called with 4, then 3 etc.
Whether it will be a new closure object or same closure object will be reused, depends on a compiler. This can have an impact on performance, but not on semantics of the recursion.
I like this question. 'The scheme programming language' is a good book. My idea is from Chapter 2 of that book.
First, we know this:
(letrec ((fact (lambda (n) (if (= n 1) 1 (* (fact (- n 1)) n))))) (fact 5))
With letrec we can make functions recursively. And we see when we call (fact 5), fact is already bound to a function. If we have another function, we can call it this way (another fact 5), and now another is called binary function (my English is not good, sorry). We can define another as this:
(let ((another (lambda (f x) .... (f x) ...))) (another fact 5))
Why not we define fact this way?
(let ((fact (lambda (f n) (if (= n 1) 1 (* n (f f (- n 1))))))) (fact fact 5))
If fact is a binary function, then it can be called with a function f and integer n, in which case function f happens to be fact itself.
If you got all the above, you could write Y combinator now, making a substitution of let with lambda.
With a single lambda it's not possible. But using two or more lambda's it is possible. As, all other solutions are using three lambdas or let/letrec, I'm going to explain the method using two lambdas:
((lambda (f x)
(f f x))
(lambda (self n)
(if (= n 0)
1
(* n (self self (- n 1)))))
5)
And the output is 120.
Here,
(lambda (f x) (f f x)) produces a lambda that takes two arguments, the first one is a lambda(lets call it f) and the second is the parameter(let's call it x). Notice, in its body it calls the provided lambda f with f and x.
Now, lambda f(from point 1) i.e. self is what we want to recurse. See, when calling self recursively, we also pass self as the first argument and (- n 1) as the second argument.
I was curious about writing a recursive function without using define.
The main problem, of course, is that you cannot call a function within
itself if it doesn't have a name.
A little off-topic here, but seeing the above statements I just wanted to let you know that "without using define" does not mean "doesn't have a name". It is possible to give something a name and use it recursively in Scheme without define.
(letrec
((fact
(lambda (n)
(if (zero? n)
1
(* n (fact (sub1 n)))))))
(fact 5))
It would be more clear if your question specifically says "anonymous recursion".
I found this question because I needed a recursive helper function inside a macro, where one can't use define.
One wants to understand (lambda (x) (x x)) and the Y-combinator, but named let gets the job done without scaring off tourists:
((lambda (n)
(let sub ((i n) (z 1))
(if (zero? i)
z
(sub (- i 1) (* z i)) )))
5 )
One can also put off understanding (lambda (x) (x x)) and the Y-combinator, if code like this suffices. Scheme, like Haskell and the Milky Way, harbors a massive black hole at its center. Many a formerly productive programmer gets entranced by the mathematical beauty of these black holes, and is never seen again.
How do I pass position-independent parameters to scheme functions?
In PLT Scheme you can use:
(define area
(lambda (x #:width y)
(* x y)))
(area 3 #:width 10)
or
(area #:width 10 3)
both would return 30.
There's no standard support for this in scheme but have a look at this
I am not a scheme guru, but I'm thinking that parameters need to be a pair rather than an atom, then you make a parameter list from your pairs and use a let block to bind the values to actual parameters. And, for the love of all that is beautiful, call a helper function to do the actual work with the parameters in the right order since calling get-param in recursion is going to get expensive.
(define get-param (lambda (name pair-list)
(cond ((null? pair-list) nil)
((eq? name (caar pair-list)) (cadr (car pair-list)))
(t (get-param name (cdr pair-list))))))
; position independent subtract always subtracts y from x
; usage (f '(x 7) '(y 9)) => -2
; (f '(y 9) '(x 7)) => -2
(define f (lambda (x-pair y-pair)
(let ((pl (list x-pair y-pair))
(let ((x (get-param 'x pl)) (y (get-param 'y pl))
(- x y)))))
Someone who is really clever would make a factory function that would take an arbitrary lambda expression and build an equivalent position independent lambda from it.