I'm integrating af ASP.NET application, which must consume a 3rd party SOAP web service, which can only be accessed by HTTPS. I add a service reference i VS2012 with the HTTPS URL and VS find the service just fine. But when I use the proxy that VS create to use the web service, it uses regular HTTP.
I suspect that I should alter the binding in the web.config, but I can't seem to figure out what to do. How do I set up the web service to use HTTPS?
You need to make sure that the binding the client uses has security mode="Transport" set up (and that the client binding matches the server binding), something like this for example:
<binding name="yourClientSecureBinding">
<security mode="Transport">
<transport clientCredentialType="None"/>
</security>
</binding>
and that the client indeed accesses the httpS:// address of the web service:
<client>
<endpoint bindingConfiguration="yourClientSecureBinding"
address="https://..."
... />
</client>
You are not providing any code, so for starters have a look at these posts: here (Microsoft developer network - Transport Security with an Anonymous Client) and here (Https with BasicHTTPBinding).
Related
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="DataSoap" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647">
<security mode="Transport" />
</binding>
</basicHttpBinding>
<customBinding>
<binding name="CustomBinding_GetData">
<binaryMessageEncoding />
<httpsTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" />
</binding>
</customBinding>
</bindings>
<client>
<endpoint address="https://localhost/MyApp.Web/Webservice/Data.asmx"
binding="basicHttpBinding" bindingConfiguration="DataSoap"
contract="ServiceReference1.DataSoap" name="DataSoap" />
<endpoint address="https://localhost/MyApp.Web/Webservice/GetData.svc"
binding="customBinding" bindingConfiguration="CustomBinding_GetData"
contract="GetData.GetData" name="CustomBinding_GetData" />
</client>
</system.serviceModel>
Hello every one, above is my silverlight applications ServiceReferences.ClientConfig file. The site is configured to be accessed over https. From the above file, i would imagine i have everything configured correctly. I can browser to my service from local development environment successfully but after deploying the application in my QA environment, browing to the service gives me the error below.
Could not find a base address that matches scheme https for the endpoint with binding CustomBinding. Registered base address schemes are [http].
Any i dea why http is still being picked as the registered base address schemes only QA but not in my local development environment?.
EDIT:
#Brian, thanks for the reply, let me give you more information just in case it gives a much clear picture.
The site is configured for SSL, but the SSL certificate is installed on a load balancer which i have no access to.
Now from the error message, it would seem like i have to configure Host Headers and Secure Site Bindings in IIS, but can i really do this from IIS when the SSL certificate is installed and managed from the load balancer?
IT looks like the https binding are what is missing because i can reproduce the exact same error message from my development machine if i temporarily remove the https binding i created following this link.
http://weblogs.asp.net/scottgu/tip-trick-enabling-ssl-on-iis7-using-self-signed-certificates.
So would i be right to think that i need that https binding on the load balancer rather than in IIS because the site has no SSL certificate of its own in IIS?
I ran into this problem. Basically, the URL identity associated with the certificate doesn't match the URL of the website from which it comes ... at least that was my problem.
I was able to work around this client-side security check by specifically setting (in code) the System.ServiceModel.EndPointIdentity to the URL I was connecting to.
There's a CreateDNSIdentity() function to which you give the URL of the website you're hitting.
Here's a link to the MS documentation: http://msdn.microsoft.com/en-us/library/system.servicemodel.endpointidentity.creatednsidentity(v=vs.110).aspx
I'm not sure how you'd configure this without using code.
String sFullURL = "http://MyDNSServer:8001/SomeService"
String sDNS = "MyDNSServer";
System.ServiceModel.EndpointAddress Endpoint;
System.ServiceModel.EndpointIdentity Identity = default (System.ServiceModel.EndpointIdentity);
Identity = System.ServiceModel.EndpointIdentity.CreateDnsIdentity(sDNS);
EndPoint = new System.ServiceModel.EndpointAddress(new Uri(sFullURL), Identity);
UPDATE
OK, so imagine you had a web service and the public address for this web service was IP https:// 10.134.116.161:8001/MyService. The certificate below would pass the client-side cert verification check and you would not get an error. But if this certificate shown in the picture below is deployed on public URL https:// XZYCorp:8001/MyService, you'll get that error. So you either need to override the client side cert verification check or change the cert on the LB.
This question already has an answer here:
Closed 10 years ago.
Possible Duplicate:
Restricting WCF Service access to only localhost
I have a WCF method set up for a .NET project.
I can enable the endpoint to work over https and / or http.
However, I only want the HTTP version (bindingConfiguration="webBinding") to work on localhost. Is there a way to restrict this in the web.config?
I had very limited success setting <endpoint address="localhost/"myproj/mysvc.svc" /> but ultimately didnt work.
Source: Configure WCF for LOCALHOST-only listening
Try to set the BasicHttpBinding.HostNameComparisonMode Property to HostNameComparisonMode.Exact.
or in config file..
<bindings>
<basicHttpBinding>
<binding name="Binding1"
hostNameComparisonMode ="Exact">
<security mode="None" />
</binding>
</basicHttpBinding>
</bindings>
But better is to use the named pipe binding, which should support whatever message exchange pattern you are using (it supports request-response, as well as the same concurrency and session state modes that WS supports).
From the section of MSDN titled "Choosing a Transport"
Hope this help..
I'm using Visual Studio Express 2010, I've created WCF service called OperatorService.svc. Two files were added to my App_Code IOperatorService.cs and OperatorService.cs.
My web.config was updated with
<system.serviceModel>
<services>
<service name="OperatorService">
<endpoint address="https://ssl.mysite.com/WCF/OperatorService"
binding="ws2007HttpBinding"
bindingConfiguration="SecurityByTransport"
contract="IOperatorService" />
</service>
</services>
<bindings>
<basicHttpBinding>
<binding name="SecurityByTransport">
<security mode="Transport">
<transport clientCredentialType="None" />
</security>
</binding>
</basicHttpBinding>
</bindings>
</system.serviceModel>
Now when i'm trying to access this service online, get an error to create EndPoint but i can't figure our how to create EndPoint especially when WCF address is SSL HTTPS: enabled website.
Can someone help meh?
The endpoint address, if you are IIS hosting, should be either left empty or a relative address.
WCF services can have base addresses. A base address defines a core part of the address space that the service can listen on and endpoints are defined relative to that base address. If you leave the address empty then the endpoint listens on the base address.
When you are self hosting you can specify a base address in a couple of different ways: in the ServiceHost constructor or in the config file. However, if you are IIS hosting then the base address is already a given - it is the location of the .svc file
As far as HTTPS goes, if you say that you are using transport security then the base address will automatically map to HTTPS as long as that is enabled as a protocol in web application in IIS manager. However, if you are using the Visual Studio Web Development Server (aka Cassini) then that does not support SSL
Launch the WCF config tool (SvcConfigEditor.exe, it is a available in the menu of Visual Studio, otherwise the path should be C:\Program Files\Microsoft SDKs\Windows\v6.0\Bin) and open your config file, it is GUI tool to help you make a correct config.
The error in the config file is an incomplete endpoint element, you need to specify some attributes on the endpoint to make it work. The easiest way is to use the config tool, but of course it can be hand written. MSDN has a reference on the syntax.
I have a WCF service running locally hosted by a windows service on machine A.
I have an ASP.NET application hosted in IIS on machine B.
My question is this, if I run the ASP.NET application via a browser on machine A, will it be able to consume the local WCF service?
As long as the address of the service used in the page points to machine A, you should be fine.
Yes, as long as your configuration is valid, it doesn't matter where on which server the service is used.
And yes - the client will all have to use the same config - you basically need to specify the "ABC's of WCF" - address, binding (and possibly binding configuration) and contract - the WHERE, HOW and WHAT of your service.
You can share a lot of the config - especially binding configurations - between server and client with this method: externalize certain parts of the config.
In your server, have something like:
<system.serviceModel>
<bindings configSource="bindings.config" />
</system.serviceModel>
and then in your bindings.config file, define:
<bindings>
<basicHttpBinding>
<binding name="BasicNoSecurity">
<security mode="None" />
</binding>
</basicHttpBinding>
</bindings>
That way, you can copy that file bindings.config to the clients, and reference it from the client's config file, too - sharing the same information and making sure it's the same and up to date on both ends of the communication.
This also works for any other of the subsections under <system.serviceModel> (like behaviors, extensions and so forth).
I have a WCF service that gets called from client side JavaScript. The call fails with a Service is null JavaScript error. WebDevelopment helper trace shows that the calls to load the jsdebug support file results in a 404 (file not found) error.
Restarting IIS or clearing out the Temp ASP.Net files or setting batch="false" on the compilation tag in web.config does not resolve the problem
From the browser
https://Myserver/MyApp/Services/MyService.svc displays the service metadata
however
https://Myserver/MyApp/Services/MyService.svc/jsdebug results in a 404.
The issue seems to be with the https protocol. With http /jsdebug downloads the supporting JS file.
Any ideas?
TIA
Figured it out!
Here is the services configuration section from web.config
Look at the bindingConfiguration attribute on the endpoint. The value "webBinding" points to the binding name="webBinding" tag in the bindings and that is what tells the service to use Transport level security it HTTPS. In my case the attribute value was empty causing the webservice request to the /js or /jsdebug file over HTTPS to fail and throw a 404 error.
<services>
<service name="MyService">
<endpoint address="" behaviorConfiguration="MyServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding" contract="Services.MyService" />
</service>
</services>
<bindings>
<webHttpBinding>
<binding name="webBinding">
<security mode="Transport">
</security>
</binding>
</webHttpBinding>
</bindings>
Note that the bindingConfiguration attribute should be empty ("") if the service is accessed via http instead of https (when testing on local machine with no certs)
Hope this helps someone.
If you still get the same error after all your possible work done. Just add a "AJAX Enabled WCF-Service".
For me the issue was the following; we added MVC to a solution with routing. Our WCF services were not being ignored. I resolved this by adding the following rule (where "WCF" is the folder we keep our services in).
routes.IgnoreRoute("WCF/{*pathInfo}");
Hope that saves somebody a few hours.