Hi i was going through a website where they used a very unique (according to me) background. they are mixing a color with an image and using it as background. the image is like
Then they are mixing some yellow color in it & it become like this
When i went through the code they were using something like this
background: #f6b93c url(bg1.png);
but it did not work for me!
Please help me out?
That is nothing but a short hand syntax
background: #f6b93c url(bg1.png);
So the above code simply means
background-color: #f6b93c;
background-image: url(bg1.png);
For more info on background short hand syntax
Demo
a png image with transparency and bg color will do the trick,
Otherwise if it is a jpeg,
the color will fill the rest of the part(for eg:in a div), the image wont cover.
what was happening with this background: #f6b93c url(bg1.png);
fill the color #f6b93c then on the top of that place the image, so it was a %0%(for eg.) transparent image, this will end up with a mixer of both
with latest CSS3 technology, it is possible to create texured background. Check this out: http://lea.verou.me/css3patterns/#
but it still limited on so many aspect. And browser support is also not so ready.
your best bet is using small texture image and make repeat to that background. you could get some nice ready to use texture image here:
http://subtlepatterns.com
The image bg1.png does not seem to be in baseurl. You should try relative url. eg. if you have image inside 'images' folder, "images/bg1.png" should work.
Related
My Figma element has transparent background but I want to get it solid, simple as that, and I can't find the correct way how to do it.
Which thing in the settings I should check?
To do what you want:
First:
make sure the element fill is 100%, when you are selecting the element layer itself, it's here:
Second:
make sure the frame itself has no grid active, so you can click the minus icon behind the grid section if it's active, like here:
I needed to remove layout grid for the whole page and colors became normal. I think that is so user could see the background grid so he could make the best possible design and then you delete it when you stop developing and your work is finished
Go to the fill section of the items settings and make sure the percentage next to the color is 100% or whatever opacity you want.
I have a button on which I set the background image using css, and then sometimes need to change it dynamically in the code. But if I change it, I see both images, one on top of the other.
Here's my css:
ExpertVideoButton{
cn1-derive: Label;
background-image: url(images/play-video.png);
cn1-source-dpi: 180;
cn1-background-type: cn1-image-scaled-fit;
}
And my code:
mStateMachine.findViewVideoBtn(f).getAllStyles().setBgImage(mStateMachine.res.getImage("no_video.png"));
The previous background image doesn't get replaced by the new one. Any ideas on how to solve this?
Update
The original background image wasn't actually being set from the css - there was a css style that was unused, and the image was being set from the code, twice. The first time I had made it the Label's icon, and the second time its background image. Unfortunately, this was a case of me having trouble reading my own code!
Since you use transparent images you need to set the bgTransparency of the style to transparent (0) in the CSS (not sure how you do it there).
I am trying to create HTML Table and give some cells a special border,
you can see the example here - I marked it with Arrow..
Please help me to understand how can I create such border , without using images.
I read this topic, but I could not be able to transfer it to table element or do it as the border of it..
Customizing border properties using zigzag edges
Thanks,
Gabi.
The answer is to use an image as a background to the cell. The image contains the curve and the image could be white and grey, or transparent and grey depending on your use case.
Always try to see what could be there instead of what you think is there
I'm new to web programming, recently I've been asked to make some home pages for someone.
Unfortunately I've run into some problem, the homepage will be on a touch screen for touch input, I've got reports like buttons most of the time doesn't work when clicked on, one of my suspects is invisible borders caused by PNGs.
TL;DR - http://puu.sh/6HQez.jpg The corner of the red button is being blocked by the invisible border of the purple button, are there any ways to fix that?
EDIT: No I'm not asking for how to remove the dotted line, I made them visible to show you.
It seems like what you are referring to is not an 'invisible border' but an 'invisible background'.
Your PNG files are rectangular shaped when it comes to event handling, even if some parts are transparent.
If you need to disable some elements from being clicked, you can go about it few ways:
Disable pointer-events with CSS to make sure that a specific
element does not caputre clicks.
#mypurplediv {pointer-events: none;}
Use Z-index to decide the hierarchy of your elements:
#mypurplediv {z-index: 0;}
#myrediv {z-index: 1;}
EDIT:
Per your comments, it seems that you need to retain the abiity to click on ALL elements.
As I mentioned above , your current PNGs are actually rectangles with some parts being transparents.
So you have these options:
1) Use SVG which are vector based shapes (that will by default not have invisible backgrounds). Good tutorial here.
2) Use image mapping and area to create your shapes and give them href. This is a good tutorial about image mapping.
example - <area shape="poly" coords="74,0,113,29,98,72,52,72,38,27" href="index.htm">
3) Use 3rd party javascript/jQuery libraries such as ImageMapster.
Hope this helps!
That dotted border is called focus outline. You can turn it off by applying CSS to the image.
img { outline: none; }
In an image like this, I want to remove the white background but keep the grayness of the dropshadow. Reomving mapping the actual image is not a problem!
This is what I enden up doing instead after lots and lots of trial and error.
Duplicate the layer with the paper in it.
Invert the new layer.
Painting the "paper-part" clear white
Using the inverted layer as a mask on the first layer.
Worked like a charm, perfect masking!
Two options that I can think of:
a) Edit the image in photoshop and make the background transparent.
b) Overlay the "white" background w/ a div overlay that has a white background.
a is the preferred option. Post a comment on this reply if you need me to do this for you.
did you make that image? Why not make the image on a transparent background?
But if you didn't make the image, I don't know if you really can unless you plan on putting it on another whitish background because the dropshadow itself is going to be a little transparent and whatever is underneath it will show through.