As I understand, the body size of HTTP POST request is unlimited. Thus a client may send gigabytes of data in one HTTP request. Now I wonder how an HTTP server should handle such requests. How do Tomcat and Jetty handle them ?
Not true. For example Apache has a default size of 20 MB, configurable in httpd.conf. Then TCP connection will be closed so client cannot send anymore.
Tomcat is configured to limit the post size to 2 MB by default. See http://tomcat.apache.org/tomcat-7.0-doc/config/http.html:
maxPostSize
The maximum size in bytes of the POST which will be handled by the container FORM URL parameter parsing. The limit can be disabled by setting this attribute to a value less than or equal to 0. If not specified, this attribute is set to 2097152 (2 megabytes).
Related
Do you know, if the HTTP protocol supports to request the maximal size of a Post request?
I want to implement an upload of a large file via HTTP Http. The file upload needs to be split into chunks, because the server/application has a limit of 25 MB of Post-Request and the files are larger than 25 MB. To avoid setting a hardcoded limit of 25 MB I rather would get the limit size by the server.
I'm reading a book that looks at different web service architectures, including an overview of how the SOAP protocol can be implemented in via HTTP. This was interesting to me because I do a lot of WCF development and didn't realize how client/server communication was implemented.
Since protocols like TCP and whatever is lower than that have fixed maximum packet sizes and as such have to split messages into packets, I just assumed that HTTP was similar. Is that not the case?
I.e. If I make a GET/POST request with a 20MB body, will a single HTTP envelope be sent and reassembled on the server?
If this is the case, what is the largest practical size of an http request? i have previously configured Nginx servers to allow 20mb file transfers and I'm wondering if this is too high...
From HTTP specification point of view, there is no limit for HTTP payload. According to RFC7230:
Any Content-Length field value greater than or equal to zero is valid. Since there is no predefined limit to the length of a payload, a recipient MUST anticipate potentially large decimal numerals and prevent parsing errors due to integer conversion overflows.
However, to prevent attack via very long or very slow stream of data, a web server may reject such HTTP request and return 413 Payload Too Large response.
"Since protocols like TCP and whatever is lower than that have fixed maximum packet sizes and as such have to split messages into packets, I just assumed that HTTP was similar. Is that not the case?"
No. HTTP is an application level protocol and is totally different. As HTTP is based on TCP, when the data is transferring, it would automatically split into packets on TCP level. There is no need to split the request on HTTP level.
An HTTP body can be as large as you want it to be, there is no download size limit, the size limit is usually set for uploads, to prevent someone uploading massive files to your server.
You can ask for a section of a resource using the Range header, if you only want part of it.
IE had limits of 2 and 4 GB at times, but these have been fixed since. Source
What's the maximum length of an HTTP GET request?
Is there a response error defined that the server can/should return if it receives a GET request that exceeds this length?
This is in the context of a web service API, although it's interesting to see the browser limits as well.
The limit is dependent on both the server and the client used (and if applicable, also the proxy the server or the client is using).
Most web servers have a limit of 8192 bytes (8 KB), which is usually configurable somewhere in the server configuration. As to the client side matter, the HTTP 1.1 specification even warns about this. Here's an extract of chapter 3.2.1:
Note: Servers ought to be cautious about depending on URI lengths above 255 bytes, because some older client or proxy implementations might not properly support these lengths.
The limit in Internet Explorer and Safari is about 2 KB, in Opera about 4 KB and in Firefox about 8 KB. We may thus assume that 8 KB is the maximum possible length and that 2 KB is a more affordable length to rely on at the server side and that 255 bytes is the safest length to assume that the entire URL will come in.
If the limit is exceeded in either the browser or the server, most will just truncate the characters outside the limit without any warning. Some servers however may send an HTTP 414 error.
If you need to send large data, then better use POST instead of GET. Its limit is much higher, but more dependent on the server used than the client. Usually up to around 2 GB is allowed by the average web server.
This is also configurable somewhere in the server settings. The average server will display a server-specific error/exception when the POST limit is exceeded, usually as an HTTP 500 error.
You are asking two separate questions here:
What's the maximum length of an HTTP GET request?
As already mentioned, HTTP itself doesn't impose any hard-coded limit on request length; but browsers have limits ranging on the 2 KB - 8 KB (255 bytes if we count very old browsers).
Is there a response error defined that the server can/should return if it receives a GET request exceeds this length?
That's the one nobody has answered.
HTTP 1.1 defines status code 414 Request-URI Too Long for the cases where a server-defined limit is reached. You can see further details on RFC 2616.
For the case of client-defined limits, there isn't any sense on the server returning something, because the server won't receive the request at all.
Browser limits are:
Browser Address bar document.location
or anchor tag
---------------------------------------------------
Chrome 32779 >64k
Android 8192 >64k
Firefox >64k >64k
Safari >64k >64k
Internet Explorer 11 2047 5120
Edge 16 2047 10240
Want more? See this question on Stack Overflow.
A similar question is here: Is there a limit to the length of a GET request?
I've hit the limit and on my shared hosting account, but the browser returned a blank page before it got to the server I think.
Technically, I have seen HTTP GET will have issues if the URL length goes beyond 2000 characters. In that case, it's better to use HTTP POST or split the URL.
As already mentioned, HTTP itself doesn't impose any hard-coded limit on request length; but browsers have limits ranging on the 2048 character allowed in the GET method.
Yes. There isn't any limit on a GET request.
I am able to send ~4000 characters as part of the query string using both the Chrome browser and curl command.
I am using Tomcat 8.x server which has returned the expected 200 OK response.
Here is the screenshot of a Google Chrome HTTP request (hiding the endpoint I tried due to security reasons):
RESPONSE
I have a web application that adds contextual information to XmlHttpRequest objects using the setRequestHeader API. I am using a custom header name (e.g. X-Foo) and a JSON structured value. It isn't part of the URL QueryString or POST body because it is meta information about the request.
Is there a practical size limit to the header value? If my JSON gets truncated, it becomes unparseable. I am most concerned with limits in Apache 2, Tomcat 6 and IIS 7. I did a Google search for http header length limit, but many of the results seem dated. There are some relevant comments in How big can a user agent string get? but not as specific as I would like.
Edit:
I just ran across this similar question - Maximum on http header values?
Although each web server software has some limitations, there is a difference whether there’s a limit for the HTTP request line plus header fields or for each header field.
Here’s a summary:
Apache 1.3, 2.0, 2.2, 2.3: 8190 Bytes (for each header field)
IIS:
4.0: 2097152 Bytes (for the request line plus header fields)
5.0: 131072 Bytes, 16384 Bytes with Windows 2000 Service Pack 4 (for the request line plus header fields)
6.0: 16384 Bytes (for each header fields)
Tomcat:
5.5.x/6.0.x: 49152 Bytes (for the request line plus header fields)
7.0.x: 8190 Bytes (for the request line plus header fields)
So to conclude: To be accepted by all web servers above, a request’s request line plus header fields should not exceed 8190 Bytes. This is also the limit for each header fields (effectively even less).
Yes, but the limits are configurable and dependent on platform. For example, Tomcat has a default limit of 8K. I believe that IIS 6, not sure about IIS 7, has a limit of 16K. I ran into this when using integrated windows authentication for several web sites. Turns out my security token was too large when encoded into the header. Fortunately, these are configurable. Registry settings for IIS can be found at http://support.microsoft.com/kb/820129. I believe the key settings to change are MaxFieldLength (per header size) and MaxRequestBytes (total size of request).
For Apache, I found this Server Limits for Apache Security article that lists these directives:
# allow up to 100 headers in a request
LimitRequestFields 100
# each header may be up to 8190 bytes long
LimitRequestFieldsize 8190
For Nginx, the large_client_header_buffers directive from HttpCoreModule controls this:
The longest header line of request also must be not more than the size
of one buffer, otherwise the client get the error "Bad request" (400).
By default the size of one buffer is equal to the size of page,
depending on platform this either 4K or 8K
While you can configure the server, it's unlikely that you really can configure the whole way through firewalls, load balancers and proxies. Keeping the header size small keeps problems away.
The Flash Media Server 4.5 has a very short default header length limit which can cause the server to simply not respond, particularly in circumstances where there is a moderate cookie load.
See: Flash Media Server 4.5 Configuration and Administration: Configuring the server
Configuring Apache HTTP Server: Specify the maximum HTTP header line length
In the Flash Media Server Adaptor.xml file, the MaxHeaderLineLength
element determines the size of the HTTP header the server can handle.
The default value for MaxHeaderLineLength is 1024 bytes. Some browsers
send a header larger than 1024 bytes. In this scenario, Apache sends
back an empty response. To fix this issue, configure
MaxHeaderLineLength to 8192.
Note: By default, the Apache HTTP header size limit is 8 KB (8190 bytes plus a carriage return).
Putting this here in case the header size limit on Flash Media Server bites someone else.
Is there an accepted maximum allowed size for HTTP headers? If so, what is it? If not, is this something that's server specific or is the accepted standard to allow headers of any size?
No, HTTP does not define any limit. However most web servers do limit size of headers they accept. For example in Apache default limit is 8KB, in IIS it's 16K. Server will return 413 Entity Too Large error if headers size exceeds that limit.
Related question: How big can a user agent string get?
As vartec says above, the HTTP spec does not define a limit, however many servers do by default. This means, practically speaking, the lower limit is 8K. For most servers, this limit applies to the sum of the request line and ALL header fields (so keep your cookies short).
Apache 2.0, 2.2: 8K
nginx: 4K - 8K
IIS: varies by version, 8K - 16K
Tomcat: varies by version, 8K - 48K (?!)
It's worth noting that nginx uses the system page size by default, which is 4K on most systems. You can check with this tiny program:
pagesize.c:
#include <unistd.h>
#include <stdio.h>
int main() {
int pageSize = getpagesize();
printf("Page size on your system = %i bytes\n", pageSize);
return 0;
}
Compile with gcc -o pagesize pagesize.c then run ./pagesize. My ubuntu server from Linode dutifully informs me the answer is 4k.
Here is the limit of most popular web server
Apache - 8K
Nginx - 4K-8K
IIS - 8K-16K
Tomcat - 8K – 48K
Node (<13) - 8K; (>13) - 16K
HTTP does not place a predefined limit on the length of each header
field or on the length of the header section as a whole, as described
in Section 2.5. Various ad hoc limitations on individual header
field length are found in practice, often depending on the specific
field semantics.
HTTP Header values are restricted by server implementations. Http specification doesn't restrict header size.
A server that receives a request header field, or set of fields,
larger than it wishes to process MUST respond with an appropriate 4xx
(Client Error) status code. Ignoring such header fields would
increase the server's vulnerability to request smuggling attacks
(Section 9.5).
Most servers will return 413 Entity Too Large or appropriate 4xx error when this happens.
A client MAY discard or truncate received header fields that are
larger than the client wishes to process if the field semantics are
such that the dropped value(s) can be safely ignored without changing
the message framing or response semantics.
Uncapped HTTP header size keeps the server exposed to attacks and can bring down its capacity to serve organic traffic.
Source
RFC 6265 dated 2011 prescribes specific limits on cookies.
https://www.rfc-editor.org/rfc/rfc6265
6.1. Limits
Practical user agent implementations have limits on the number and
size of cookies that they can store. General-use user agents SHOULD
provide each of the following minimum capabilities:
o At least 4096 bytes per cookie (as measured by the sum of the
length of the cookie's name, value, and attributes).
o At least 50 cookies per domain.
o At least 3000 cookies total.
Servers SHOULD use as few and as small cookies as possible to avoid
reaching these implementation limits and to minimize network
bandwidth due to the Cookie header being included in every request.
Servers SHOULD gracefully degrade if the user agent fails to return
one or more cookies in the Cookie header because the user agent might
evict any cookie at any time on orders from the user.
--
The intended audience of the RFC is what must be supported by a user-agent or a server. It appears that to tune your server to support what the browser allows you would need to configure 4096*50 as the limit. As the text that follows suggests, this does appear to be far in excess of what is needed for the typical web application. It would be useful to use the current limit and the RFC outlined upper limit and compare the memory and IO consequences of the higher configuration.
I also found that in some cases the reason for 502/400 in case of many headers could be because of a large number of headers without regard to size.
from the docs
tune.http.maxhdr
Sets the maximum number of headers in a request. When a request comes with a
number of headers greater than this value (including the first line), it is
rejected with a "400 Bad Request" status code. Similarly, too large responses
are blocked with "502 Bad Gateway". The default value is 101, which is enough
for all usages, considering that the widely deployed Apache server uses the
same limit. It can be useful to push this limit further to temporarily allow
a buggy application to work by the time it gets fixed. Keep in mind that each
new header consumes 32bits of memory for each session, so don't push this
limit too high.
https://cbonte.github.io/haproxy-dconv/configuration-1.5.html#3.2-tune.http.maxhdr
If you are going to use any DDOS provider like Akamai, they have a maximum limitation of 8k in the response header size. So essentially try to limit your response header size below 8k.