Related
Is it possible to set the opacity of a background image without affecting the opacity of child elements?
Example
All links in the footer need a custom bullet (background image) and the opacity of the custom bullet should be 50%.
HTML
<div id="footer">
<ul>
<li>Link 1</li>
<li>Link 2</li>
<li>Link 3</li>
<li>Link 4</li>
<li>Link 5</li>
</ul>
</div>
CSS
#footer ul li {
background: url(/images/arrow.png) no-repeat 0 50%;
}
What I've Tried
I tried setting the opacity of the list items to 50%, but then the opacity of the link text is also 50% - and there doesn't seem to be a way to reset the opacity of child elements:
#footer ul li {
background: url(/images/arrow.png) no-repeat 0 50%;
/* will also set the opacity of the link text */
opacity: 0.5;
}
I also tried using rgba, but that doesn't have any effect on the background image:
#footer ul li {
/* rgba doesn't apply to the background image */
background: rgba(255, 255, 255, 0.5) url(/images/arrow.png) no-repeat 0 50%;
}
You can use CSS linear-gradient() with rgba().
div {
width: 300px;
height: 200px;
background: linear-gradient(rgba(255,255,255,.5), rgba(255,255,255,.5)), url("https://i.imgur.com/xnh5x47.jpg");
}
span {
background: black;
color: white;
}
<div><span>Hello world.</span></div>
Take your image into an image editor, turn down the opacity, save it as a .png and use that instead.
This will work with every browser
div {
-khtml-opacity:.50;
-moz-opacity:.50;
-ms-filter:"alpha(opacity=50)";
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
opacity:.50;
}
If you don't want transparency to affect the entire container and its children, check this workaround. You must have an absolutely positioned child with a relatively positioned parent.
Check demo at http://www.impressivewebs.com/css-opacity-that-doesnt-affect-child-elements/
If you are using the image as a bullet, you might consider the :before pseudo element.
#footer ul li {
}
#footer ul li:before {
content: url(/images/arrow.png);
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
opacity:.50;
}
You can put the image in the div:after or div:before and set the opacity on that "virtual div"
div:after {
background: url(https://s3-us-west-2.amazonaws.com/s.cdpn.io/3/owl1.jpg);
opacity: 0.25;
}
found here
http://css-tricks.com/snippets/css/transparent-background-images/
#footer ul li {
position: relative;
opacity: 0.99;
}
#footer ul li::before {
content: "";
position: absolute;
width: 100%;
height: 100%;
z-index: -1;
background: url(/images/arrow.png) no-repeat 0 50%;
opacity: 0.5;
}
Hack with opacity .99 (less than 1) creates z-index context so you can not worry about global z-index values. (Try to remove it and see what happens in the next demo where parent wrapper has positive z-index.)
If your element already has z-index, then you don't need this hack.
Demo of this technique.
Unfortunately, at the time of writing this answer, there is no direct way to do this. You need to:
use a semi-transparent image for background (much easier).
add an extra element (like div) next to children which you want the opaque, add background to it and after making it semi-transparent, position it behind mentioned children.
Another option is CSS Tricks approach of inserting a pseudo element the exact size of the original element right behind it to fake the opaque background effect that we're looking for. Sometimes you will need to set a height for the pseudo element.
div {
width: 200px;
height: 200px;
display: block;
position: relative;
}
div::after {
content: "";
background: url(image.jpg);
opacity: 0.5;
top: 0;
left: 0;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
}
The "filter" property, needs an integer for percentage of opacity instead of double, in order to work for IE7/8.
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=50);
P.S.: I post this as an answer, since SO, needs at least 6 changed characters for an edit.
To really fine-tune things, I recommend placing the appropriate selections in browser-targeting wrappers. This was the only thing that worked for me when I could not get IE7 and IE8 to "play nicely with others" (as I am currently working for a software company who continues to support them).
/* color or background image for all browsers, of course */
#myBackground {
background-color:#666;
}
/* target chrome & safari without disrupting IE7-8 */
#media screen and (-webkit-min-device-pixel-ratio:0) {
#myBackground {
-khtml-opacity:.50;
opacity:.50;
}
}
/* target firefox without disrupting IE */
#-moz-document url-prefix() {
#myBackground {
-moz-opacity:.50;
opacity:0.5;
}
}
/* and IE last so it doesn't blow up */
#myBackground {
opacity:.50;
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
}
I may have redundancies in the above code -- if anyone wishes to clean it up further, feel free!
we can figure out that by not playing with opacity just by using rgba color
e.g "background-color: rgba(0,0,0, 0.5)"
Sample :
Previous Css:
.login-card {
// .... others CSS
background-color: #121e1b;
opacity: 0.5;
}
To :
.login-card {
// .... others CSS
background-color: rgba(0, 0, 0, 0.5);
}
If you have to set the opacity only to the bullet, why don't you set the alpha channel directly into the image? By the way I don't think there is a way to set the opacity to a background image via css without changing the opacity of the whole element (and its children too).
Just to add to the above..you can use the alpha channel with the new color attributes eg. rgba(0,0,0,0) ok so this is black but with zero opacity so as a parent it will not affect the child. This only works on Chrome, FF, Safari and....I thin O.
convert your hex colours to RGBA
I found a pretty good and simple tutorial about this issue. I think it works great (and though it supports IE, I just tell my clients to use other browsers):
CSS background transparency without affecting child elements, through RGBa and filters
From there you can add gradient support, etc.
#footer ul li
{
position:relative;
list-style:none;
}
#footer ul li:before
{
background-image: url(imagesFolder/bg_demo.png);
background-repeat:no-repeat;
content: "";
top: 5px;
left: -10px;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
opacity: 0.5;
}
You can try this code. I think it will be worked. You can visit the demo
When I use the opacity on image hover. It only getting lighter or dimmer but not darker.
I have tried to increase the number of opacity to make it darker, but not success. Below is the code block that I have tried to make the image become darker on hover:
<style>
.category-product img {
display: block;
margin-left: auto;
margin-right: auto
}
.category-product img:hover {
opacity: 0.5;
}
</style>
<div class="category-product">
<img src="hinh/paris.jpg" data-img="product-image-1">
</div>
Image of opacity applied on my current try
I expect the image will become darker on hover.
Expected result
They way to use opacity is by the other side you are trying. 1 opacity means that element is full opaque, "opacity: .5" means half opacity, so you will see you element half transparent and the color of the element behind the image and thats your result.
A quick, better and easy way to get that effect is using filter propierties of css.
<style>
.category-product img {
display: block;
margin-left: auto;
margin-right: auto;
transition: all .3s;/* I put this to get smooth transition */
}
// Then at hover, you can do a filter: brightness and set a lower value
.category-product img:hover {
filter: brightness(0.4);
}
</style>
<div class="category-product">
<img src="http://lorempixel.com/output/sports-q-c-640-480-7.jpg" data-img="product-image-1">
</div>
Here is the example at Codepen:
https://codepen.io/ChemaAlfonso/pen/ROJNev
hope it helps you
Style opacity = 0.5 will make the image become dimmer but not darker. To make the picture become darker on hover, we set the background div containing the picture to dark. Thus, when hovered the picture will dimmer and with the black background, it will make the picture looks darker.
<style>
.category-product {
background: black;
}
.category-product img {
display: block;
margin-left: auto;
margin-right: auto
}
.category-product img:hover {
opacity: 0.5;
}
</style>
<div class="category-product">
<img src="hinh/paris.jpg" data-img="product-image-1">
</div>
In the code above, I just set the containing div with black background.
On mouse hover use background-color: rgba(black, 0.5); instead of opacity: 0.5;
<style>
.category-product img {
display: block;
margin-left: auto;
margin-right: auto
}
.category-product img:hover {
background-color: rgba(black, 0.5);
}
</style>
<div class="category-product">
<img src="hinh/paris.jpg" data-img="product-image-1">
</div>
I've been trying to use the mix-blend-mode on a page that has contains instances of css opacity transitions. What appears to be happening is that the div containing the mix-blend-mode displays as it would without the blend mode during the transition, or rather, while the animation is in progress. I've only found it to be an issue in Chrome.
In my example, while the div is transforming the blend-mode displays correctly over the image but not over the page background. Once the transition is complete it goes back to display as it should. In other words the blended div appears as solid yellow on the black background while the animation is ongoing but since it is set to darken it should be invisible over the black background. Once the animation is finished it appears as it should. It appears normal over the image.
I've tried this is Firefox and Safari and there seems to be no issue.
Pen: http://codepen.io/anon/pen/QGGVOX
Edit - I've found another instance where this occurring that doesn't involve any animation. Weirdly it happens when the position of one div is set to fixed while the other is absolute, see here: http://codepen.io/anon/pen/wooRME If the position of the div .image is changed to absolute then the blend-mode appears normal.
body {
background: #000;
}
.blend {
height: 650px;
width: 50%;
background-color: yellow;
mix-blend-mode: darken;
position: absolute;
opacity: 1;
left: 0;
top: 0px;
z-index: 100;
}
img {
position: relative;
z-index: 0;
}
So, I think I figured the problem. During the animation, it seems like the body doesn't count as an element, thus making the yellow appear at 1 opacity. I tested with other blend mode and it always appears yellow. (when set to 'difference the expected result would be white instead of yellow)
So the fix? just add a div with 100% sizes and a black background! Then, the yellow has something to blend in and doesn't show up.
Here's the code that worked in your pen:
html - added the bg div:
<div class="bg"></div>
<div class="blend"></div>
<img src="http://lorempixel.com/500/500/">
it's css:
.bg{
background: #000;
position: absolute;
width: 100%;
height: 100%;
margin: 0;
}
body {
background: #000;
width: 100%;
height: 100%;
margin: 0;
}
I also changed the body to fill the window so the margin weren't yellow too. Alternatively, the blend div could be sized in function of the body.
tagging #chrscblls since they wanted to know if you found anything.
EDIT :
For the other codepen the problem wasn't the same tho. They were trying to darken an image and a yellow rectangle onto a gray background.
If they didn't want the yellow to show on their gray background, the solution was simply to put the image inside a div and use ::after to blend in a color. Or even just make an empty div, give it the image as background and use the ::after.
this:
<div/>
with:
body {
background: #333;
}
div{
position:fixed;
width: 500px;
height: 500px;
top:50px;
left: 50px;
mix-blend-mode: darken;
background-image: url("http://lorempixel.com/500/500/");
}
div::after {
content: "";
height: 100%;
width: 100%;
background-color: yellow;
mix-blend-mode: darken;
position:absolute;
opacity: 1;
left: 0;
top: 0;
}
or this:
<div><img src="http://lorempixel.com/500/500/"></div>
without the 'background-image' in the div css.
Is it possible to set the opacity of a background image without affecting the opacity of child elements?
Example
All links in the footer need a custom bullet (background image) and the opacity of the custom bullet should be 50%.
HTML
<div id="footer">
<ul>
<li>Link 1</li>
<li>Link 2</li>
<li>Link 3</li>
<li>Link 4</li>
<li>Link 5</li>
</ul>
</div>
CSS
#footer ul li {
background: url(/images/arrow.png) no-repeat 0 50%;
}
What I've Tried
I tried setting the opacity of the list items to 50%, but then the opacity of the link text is also 50% - and there doesn't seem to be a way to reset the opacity of child elements:
#footer ul li {
background: url(/images/arrow.png) no-repeat 0 50%;
/* will also set the opacity of the link text */
opacity: 0.5;
}
I also tried using rgba, but that doesn't have any effect on the background image:
#footer ul li {
/* rgba doesn't apply to the background image */
background: rgba(255, 255, 255, 0.5) url(/images/arrow.png) no-repeat 0 50%;
}
You can use CSS linear-gradient() with rgba().
div {
width: 300px;
height: 200px;
background: linear-gradient(rgba(255,255,255,.5), rgba(255,255,255,.5)), url("https://i.imgur.com/xnh5x47.jpg");
}
span {
background: black;
color: white;
}
<div><span>Hello world.</span></div>
Take your image into an image editor, turn down the opacity, save it as a .png and use that instead.
This will work with every browser
div {
-khtml-opacity:.50;
-moz-opacity:.50;
-ms-filter:"alpha(opacity=50)";
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
opacity:.50;
}
If you don't want transparency to affect the entire container and its children, check this workaround. You must have an absolutely positioned child with a relatively positioned parent.
Check demo at http://www.impressivewebs.com/css-opacity-that-doesnt-affect-child-elements/
If you are using the image as a bullet, you might consider the :before pseudo element.
#footer ul li {
}
#footer ul li:before {
content: url(/images/arrow.png);
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
opacity:.50;
}
You can put the image in the div:after or div:before and set the opacity on that "virtual div"
div:after {
background: url(https://s3-us-west-2.amazonaws.com/s.cdpn.io/3/owl1.jpg);
opacity: 0.25;
}
found here
http://css-tricks.com/snippets/css/transparent-background-images/
#footer ul li {
position: relative;
opacity: 0.99;
}
#footer ul li::before {
content: "";
position: absolute;
width: 100%;
height: 100%;
z-index: -1;
background: url(/images/arrow.png) no-repeat 0 50%;
opacity: 0.5;
}
Hack with opacity .99 (less than 1) creates z-index context so you can not worry about global z-index values. (Try to remove it and see what happens in the next demo where parent wrapper has positive z-index.)
If your element already has z-index, then you don't need this hack.
Demo of this technique.
Unfortunately, at the time of writing this answer, there is no direct way to do this. You need to:
use a semi-transparent image for background (much easier).
add an extra element (like div) next to children which you want the opaque, add background to it and after making it semi-transparent, position it behind mentioned children.
Another option is CSS Tricks approach of inserting a pseudo element the exact size of the original element right behind it to fake the opaque background effect that we're looking for. Sometimes you will need to set a height for the pseudo element.
div {
width: 200px;
height: 200px;
display: block;
position: relative;
}
div::after {
content: "";
background: url(image.jpg);
opacity: 0.5;
top: 0;
left: 0;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
}
The "filter" property, needs an integer for percentage of opacity instead of double, in order to work for IE7/8.
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=50);
P.S.: I post this as an answer, since SO, needs at least 6 changed characters for an edit.
To really fine-tune things, I recommend placing the appropriate selections in browser-targeting wrappers. This was the only thing that worked for me when I could not get IE7 and IE8 to "play nicely with others" (as I am currently working for a software company who continues to support them).
/* color or background image for all browsers, of course */
#myBackground {
background-color:#666;
}
/* target chrome & safari without disrupting IE7-8 */
#media screen and (-webkit-min-device-pixel-ratio:0) {
#myBackground {
-khtml-opacity:.50;
opacity:.50;
}
}
/* target firefox without disrupting IE */
#-moz-document url-prefix() {
#myBackground {
-moz-opacity:.50;
opacity:0.5;
}
}
/* and IE last so it doesn't blow up */
#myBackground {
opacity:.50;
filter:alpha(opacity=50);
filter: progid:DXImageTransform.Microsoft.Alpha(opacity=0.5);
}
I may have redundancies in the above code -- if anyone wishes to clean it up further, feel free!
we can figure out that by not playing with opacity just by using rgba color
e.g "background-color: rgba(0,0,0, 0.5)"
Sample :
Previous Css:
.login-card {
// .... others CSS
background-color: #121e1b;
opacity: 0.5;
}
To :
.login-card {
// .... others CSS
background-color: rgba(0, 0, 0, 0.5);
}
If you have to set the opacity only to the bullet, why don't you set the alpha channel directly into the image? By the way I don't think there is a way to set the opacity to a background image via css without changing the opacity of the whole element (and its children too).
Just to add to the above..you can use the alpha channel with the new color attributes eg. rgba(0,0,0,0) ok so this is black but with zero opacity so as a parent it will not affect the child. This only works on Chrome, FF, Safari and....I thin O.
convert your hex colours to RGBA
I found a pretty good and simple tutorial about this issue. I think it works great (and though it supports IE, I just tell my clients to use other browsers):
CSS background transparency without affecting child elements, through RGBa and filters
From there you can add gradient support, etc.
#footer ul li
{
position:relative;
list-style:none;
}
#footer ul li:before
{
background-image: url(imagesFolder/bg_demo.png);
background-repeat:no-repeat;
content: "";
top: 5px;
left: -10px;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
opacity: 0.5;
}
You can try this code. I think it will be worked. You can visit the demo
I want to change the image from normal to brighter when it's on hover, My code:
<div class="nkhome">
<img src="Images/btnhome.png" />
</div>
.nkhome{
margin-left:260px;
top:170px;
position:absolute;
width:59px;
height:59px;
}
.nkhome a img:hover {
background:url(Images/btnhomeh.png);
position:absolute;
top:0px;
}
Why doesn't work the hover? When my mouse is on it, it shows the first image, not the hover image.
You've got an a tag containing an img tag. That's your normal state.
You then add a background-image as your hover state, and it's appearing in the background of your a tag - behind the img tag.
You should probably create a CSS sprite and use background positions, but this should get you started:
<div>
</div>
div a {
width: 59px;
height: 59px;
display: block;
background-image: url('images/btnhome.png');
}
div a:hover {
background-image: url('images/btnhomeh.png);
}
This A List Apart Article from 2004 is still relevant, and will give you some background about sprites, and why it's a good idea to use them instead of two different images. It's a lot better written than anything I could explain to you.
Simply this, no extra div or JavaScript needed, just pure CSS (jsfiddle demo):
HTML
<a href="javascript:alert('Hello!')" class="changesImgOnHover">
<img src="http://dummyimage.com/50x25/00f/ff0.png&text=Hello!" alt="Hello!">
</a>
CSS
.changesImgOnHover {
display: inline-block; /* or just block */
width: 50px;
background: url('http://dummyimage.com/50x25/0f0/f00.png&text=Hello!') no-repeat;
}
.changesImgOnHover:hover img {
visibility: hidden;
}
You're setting the background of the image to another image. Which is fine, but the foreground (SRC attribute of the IMG) still overlays everything else.
.nkhome{
margin-left:260px;
top:170px;
position:absolute;
}
.nkhome a {
background:url(Images/btnhome.png);
display:block; /* Necessary, since A is not a block element */
width:59px;
height:59px;
}
.nkhome a:hover {
background:url(Images/btnhomeh.png);
}
<div class="nkhome">
</div>
It will not work like this, put both images as background images:
.bg-img {
background:url(images/yourImg.jpg) no-repeat 0 0;
}
.bg-img:hover {
background:url(images/yourImg-1.jpg) no-repeat 0 0;
}
Hi you should give parent position relative and child absolute and give to height or width to absolute class as like this
Css
.nkhome{
margin-left:260px;
width:59px;
height:59px;
margin-top:170px;
position:relative;
z-index:0;
}
.nkhome a:hover img{
opacity:0.0;
}
.nkhome a:hover{
background:url('http://www.prelovac.com/vladimir/wp-content/uploads/2008/03/example.jpg');
width:100px;
height:100px;
position:absolute;
top:0;
z-index:1;
}
HTML
<div class="nkhome">
<img src="http://dummyimage.com/100/000/fff.jpg" />
</div>
Live demo http://jsfiddle.net/t5FEX/7/
or this
<div class="nkhome">
<a href="Home.html"><img src="http://dummyimage.com/100/000/fff.jpg" onmouseover="this.src='http://www.prelovac.com/vladimir/wp-content/uploads/2008/03/example.jpg'"
onmouseout="this.src='http://dummyimage.com/100/000/fff.jpg'"
/></a>
</div>
Live demo http://jsfiddle.net/t5FEX/9/
Here are some easy to folow steps and a great on hover tutorial its the examples that you can "play" with and test live.
http://fivera.net/simple-cool-live-examples-image-hover-css-effect/
Exact solution to your problem
You can change the image on hover by using content:url("YOUR-IMAGE-PATH");
For image hover use below line in your css:
img:hover
and to change the image on hover using the below config inside img:hover:
img:hover{
content:url("https://www.planwallpaper.com/static/images/9-credit-1.jpg");
}
Make on class with this. And make 2 different images with the self width and height. Works in ie9.
See this link.
http://kyleschaeffer.com/development/pure-css-image-hover/
Also you can 2 differents images make and place in the self class name with in the hover the another images.
See example.
.myButtonLink {
margin-top: -5px;
display: block;
width: 45px;
height: 39px;
background: url('images/home1.png') bottom;
text-indent: -99999px;
margin-left:-17px;
margin-right:-17px;
margin-bottom: -5px;
border-radius: 3px;
-webkit-border-radius: 3px;
}
.myButtonLink:hover {
margin-top: -5px;
display: block;
width: 45px;
height: 39px;
background: url('images/home2.png') bottom;
text-indent: -99999px;
margin-left:-17px;
margin-right:-17px;
margin-bottom: -20x;
border-radius: 3px;
-webkit-border-radius: 3px;
}