For each row in the matrix "result" shown below
A B C D E F G H I J
1 4 6 3 5 9 9 9 3 4 4
2 5 7 5 5 8 8 8 7 4 5
3 7 5 4 4 7 9 7 4 4 5
4 6 6 6 6 8 9 8 6 3 6
5 4 5 5 5 8 8 7 4 3 7
6 7 9 7 6 7 8 8 5 7 6
7 5 6 6 5 8 8 7 3 3 5
8 6 7 4 5 8 9 8 4 6 5
9 6 8 8 6 7 7 7 7 6 6
I would like to plot a histogram for each row with 3 bins as shown below:
samp<-result[1,]
hist(samp, breaks = 3, col="lightblue", border="pink")
Now what is needed is to convert the histogram frequency counts into an array as follows
If I have say 4 bins and say first bin has count=5 and second bin has a count=2 and fourth bin=3. Now I want a vector of all values in each of these bins, coming from data result(for every row) in a vector as my output.
row1 5 2 0 3
For hundreds of rows I would like to do it in an automated way and hence posted this question.
In the end the matrix should look like
bin 2-4 bin 4-6 bin6-8 bin8-10
row 1 5 2 0 3
row 2
row 3
row 4
row 5
row 6
row 7
row 8
row 9
DF <- read.table(text="A B C D E F G H I J
1 4 6 3 5 9 9 9 3 4 4
2 5 7 5 5 8 8 8 7 4 5
3 7 5 4 4 7 9 7 4 4 5
4 6 6 6 6 8 9 8 6 3 6
5 4 5 5 5 8 8 7 4 3 7
6 7 9 7 6 7 8 8 5 7 6
7 5 6 6 5 8 8 7 3 3 5
8 6 7 4 5 8 9 8 4 6 5
9 6 8 8 6 7 7 7 7 6 6", header=TRUE)
m <- as.matrix(DF)
apply(m,1,function(x) hist(x,breaks = 3)$count)
# $`1`
# [1] 5 2 0 3
#
# $`2`
# [1] 5 0 2 3
#
# $`3`
# [1] 6 3 1
#
# $`4`
# [1] 1 6 2 1
#
# $`5`
# [1] 3 3 4
#
# $`6`
# [1] 3 4 2 1
#
# $`7`
# [1] 2 5 3
#
# $`8`
# [1] 6 3 1
#
# $`9`
# [1] 4 4 0 2
Note that according to the documentation the number of breaks is only a suggestion. If you want to have the same number of breaks in all rows, you should do the binning outside of hist:
breaks <- 1:5*2
t(apply(m,1,function(x) table(cut(x,breaks,include.lowest = TRUE))))
# [2,4] (4,6] (6,8] (8,10]
# 1 5 2 0 3
# 2 1 4 5 0
# 3 4 2 3 1
# 4 1 6 2 1
# 5 3 3 4 0
# 6 0 3 6 1
# 7 2 5 3 0
# 8 2 4 3 1
# 9 0 4 6 0
You could access the counts vector which is returned by hist (see ?hist for details):
counts <- hist(samp, breaks = 3, col="lightblue", border="pink")$counts
Related
I am trying to simulate a matrix of data set i*j, with i=2 ; j = 200, which represent subject and trial separately, and create random number between 0-10 based on trials with different probability. For first subject (i=1), the first 100 trials (j = 1-100) there is 70% probability to be number 1-5 and 30% probability to be number 6-10, and the probability reverse in trial 101 to 200. For second subject (i=2), the first 100 trials (j = 1-100) there is 60% probability to be number 1-5 and 40% probability to be number 6-10, and the probability reverse in trial 101 to 200.
I gave an example of 2 subjects because I need to do this with multiple i but not only 1 i.
Can I work this out with sample?
I guess what you are after is Stratified Sampling.
With base R, you can implement stratified sampling via sample, but you may need to define a user function like f as below
f <- function(N, p) {
c(
sapply(
list(p, rev(p)),
function(v) {
sapply(
sample(c(TRUE, FALSE), N, replace = TRUE, prob = v),
function(x) ifelse(x, sample(1:5, 1), sample(6:10, 1))
)
}
)
)
}
When you use it, you first define a probability list probs for each trial, e.g.,
probs <- list(c(0.7, 0.3), c(0.6, 0.4))
and then run
> lapply(probs, f, N = j)
[[1]]
[1] 2 1 2 5 3 6 9 2 2 2 3 2 3 7 4 5 3 7 1 4 10 2 3 6 8
[26] 7 8 3 1 2 5 1 4 4 4 2 1 5 5 4 1 6 4 2 9 10 5 1 1 5
[51] 4 4 3 4 8 4 10 3 2 1 3 4 7 4 2 10 1 4 3 3 5 2 7 6 5
[76] 3 10 4 2 2 5 1 2 3 2 3 3 2 9 10 10 10 10 3 1 4 3 1 1 5
[101] 8 6 5 9 1 6 1 9 10 4 5 4 6 5 8 2 4 10 6 3 8 5 10 8 8
[126] 8 9 3 8 6 5 7 10 9 6 8 9 5 6 8 4 6 6 7 4 4 8 10 10 6
[151] 9 10 9 7 8 7 3 7 4 6 10 8 10 8 5 6 10 8 9 6 6 1 9 4 8
[176] 1 5 10 7 10 8 7 6 6 5 4 7 7 8 8 1 10 8 5 8 9 4 5 6 7
[[2]]
[1] 7 9 4 9 5 3 3 9 4 5 6 10 4 5 2 3 2 5 4 5 3 8 5 2 1
[26] 6 5 3 9 3 9 9 9 8 7 3 4 5 7 3 5 3 5 7 5 3 4 2 6 4
[51] 7 6 2 7 4 4 10 4 10 2 8 10 3 2 8 1 8 10 8 4 3 2 9 8 4
[76] 4 10 1 3 10 6 8 6 3 5 2 3 3 9 4 7 5 1 1 1 3 10 5 2 7
[101] 2 10 2 6 8 10 10 7 3 7 3 3 7 1 10 3 4 1 1 8 2 5 2 4 7
[126] 2 7 7 4 9 10 7 1 4 4 9 7 9 9 9 8 4 1 10 6 10 4 4 8 9
[151] 7 8 3 2 9 1 9 7 6 9 1 6 3 9 7 8 5 9 3 8 9 6 5 1 2
[176] 5 10 2 7 8 7 8 8 8 8 8 5 1 1 7 6 3 3 4 2 3 2 3 1 3
I am new to R. In JAVA I would introduce a control variable to create a sequence such as
1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
I was thinking on doing something like
seq(from=c(1:5),to=c(5,10),by=1)
However that does not work...
Can that be solved purely with seq and rep?
How about this?
rep(0:4, each=5)+seq(from=1, to=5, by=1)
[1] 1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
Try this. You can create a function to create the sequence and apply to an initial vector v1. Here the code:
#Data
v1 <- 1:5
#Code
v2 <- c(sapply(v1, function(x) seq(from=x,by=1,length.out = 5)))
Output:
[1] 1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
And the way using seq() and rep() can be:
#Code2
rep(1:5, each = 5) + 0:4
Output:
[1] 1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
Using outer is pretty concise:
c(outer(1:5, 0:4, `+`))
#> [1] 1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
Note, 0:4 is short for seq(from = 0, to = 4, by = 1)
A perfect use case for Map or mapply. I always prefer Map because it does not simplify the output by default.
Map(seq, from = 1:5, to = 5:9)
[[1]]
[1] 1 2 3 4 5
[[2]]
[1] 2 3 4 5 6
[[3]]
[1] 3 4 5 6 7
[[4]]
[1] 4 5 6 7 8
[[5]]
[1] 5 6 7 8 9
You can use unlist() to get it the way you want.
unlist(Map(seq, from = 1:5, to = 5:9))
[1] 1 2 3 4 5 2 3 4 5 6 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9
Note that `by = 1`, the default.
My current dataset look like this
Order V1
1 7
2 5
3 8
4 5
5 8
6 3
7 4
8 2
1 8
2 6
3 3
4 4
5 5
6 7
7 3
8 6
I want to create a new variable called "V2" based on the variables "Order" and "V1". For every 8 items in the "Order" variable, I want to assign a value of "0" in "V2" if the varialbe "Order" has observation equals to 1; otherwise, "V2" takes the value of previous item in "V1".
This is the dataset that I want
Order V1 V2
1 7 0
2 5 7
3 8 5
4 5 8
5 8 5
6 3 8
7 4 3
8 2 4
1 8 0
2 6 8
3 3 6
4 4 3
5 5 4
6 7 5
7 3 7
8 6 3
Since my actual dataset is very large, I'm trying to use for loop with if statement to generate "V2". But my code keeps failing. I appreciate if anyone can help me on this, and I'm open to other statements. Thank you!
(Up front: I am assuming that the order of Order is perfectly controlled.)
You need simply ifelse and lag:
df <- read.table(text="Order V1
1 7
2 5
3 8
4 5
5 8
6 3
7 4
8 2
1 8
2 6
3 3
4 4
5 5
6 7
7 3
8 6 ", header=T)
df$V2 <- ifelse(df$Order==1, 0, lag(df$V1))
df
# Order V1 V2
# 1 1 7 0
# 2 2 5 7
# 3 3 8 5
# 4 4 5 8
# 5 5 8 5
# 6 6 3 8
# 7 7 4 3
# 8 8 2 4
# 9 1 8 0
# 10 2 6 8
# 11 3 3 6
# 12 4 4 3
# 13 5 5 4
# 14 6 7 5
# 15 7 3 7
# 16 8 6 3
with(dat,{V2<-c(0,head(V1,-1));V2[Order==1]<-0;dat$V2<-V2;dat})
Order V1 V2
1 1 7 0
2 2 5 7
3 3 8 5
4 4 5 8
5 5 8 5
6 6 3 8
7 7 4 3
8 8 2 4
9 1 8 0
10 2 6 8
11 3 3 6
12 4 4 3
13 5 5 4
14 6 7 5
15 7 3 7
16 8 6 3
Eliminate in an increasing order rows in a data frame
x<-c(4,5,6,23,5,6,7,8,0,3)
y<-c(2,4,5,6,23,5,6,7,8,0)
z<-c(1,2,4,5,6,23,5,6,7,8)
df<-data.frame(x,y,z)
df
x y z
1 4 2 1
2 5 4 2
3 6 5 4
4 23 6 5
5 5 23 6
6 6 5 23
7 7 6 5
8 8 7 6
9 0 8 7
10 3 0 8
I would like to eliminate number 23 in the df from all columns by instructing to sequentially increasingly remove a row per column (not by matching the value 23, but by its initial x location).
df
x y z
1 4 2 1
2 5 4 2
3 6 5 4
4 5 6 5
5 6 5 6
6 7 6 5
7 8 7 6
8 0 8 7
9 3 0 8
Thank you
You can iterate through the columns and remove the element from each, then reassemble as a data frame:
result <- as.data.frame(lapply(1:ncol(df), function(x) df[-(x+3),x]))
names(result) <- names(df)
result
## x y z
## 1 4 2 1
## 2 5 4 2
## 3 6 5 4
## 4 5 6 5
## 5 6 5 6
## 6 7 6 5
## 7 8 7 6
## 8 0 8 7
## 9 3 0 8
df[-(x+3),x] is the column with the value removed, by location. To start with row N in column x you would use df[-(x+N-1),x].
You could also try:
n <- 4
df1 <- df[-n,]
df1[] <- unlist(df,use.names=FALSE)[-seq(n, prod(dim(df)), by=nrow(df)+1)]
df1
# x y z
#1 4 2 1
#2 5 4 2
#3 6 5 4
#5 5 6 5
#6 6 5 6
#7 7 6 5
#8 8 7 6
#9 0 8 7
#10 3 0 8
I have a numeric element z as below:
> sort(z)
[1] 1 5 5 5 6 6 7 7 7 7 7 9 9
I would like to sequentially reorganize this element so to have
> z
[1] 1 2 2 2 3 3 4 4 4 4 4 5 5
I guess converting z to a factor and use it as an index should be the way.
You answered it yourself really:
as.integer(factor(sort(z)))
I know this has been accepted already but I decided to look inside factor() to see how it's done there. It more or less comes down to this:
x <- sort(z)
match(x, unique(x))
Which is an extra line I suppose but it should be faster if that matters.
This should do the trick
z = sort(sample(1:10, 100, replace = TRUE))
cumsum(diff(z)) + 1
[1] 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3
[26] 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6
[51] 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8
[76] 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10
Note that diff omits the first element of the series. So to compensate:
c(1, cumsum(diff(z)) + 1)
Alternative using rle:
z = sort(sample(1:10, 100, replace = TRUE))
rle_result = rle(sort(z))
rep(rle_result$values, rle_result$lengths)
> rep(rle_result$values, rle_result$lengths)
[1] 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3
[26] 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6
[51] 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8
[76] 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10
rep(seq_along(rle(x)$l), rle(x)$l)