I am making a WordPress theme that should be served to mobile users. So far I have been testing it in Chrome using User agent spoofing. Now I would like to try and access it from a real mobile device.
On my PC I access the site using a virtual host that aims a folder on my computer. How do I do this from my phone, where I can't edit hosts file?
I found this tutorial.
Regarding my httpd.conf file, I changed
Listen 80
to
Listen 192.168.xxx.xxx:8081
I also added to <Directory "cgi-bin">
Allow from all
The third thing I did was to open up port 8081.
Now, what I don't know is how to access my WordPress site from my phone, because when I type 192.168.xxx.xxx:8081 into the browser, I get Forbidden.
You can leave Listen 80 as is. Just find out the IP of your machine and type that into your phone. http://192.168.xxx.xxx
Make sure your local machine's firewalls are configured properly to accept these connections.
If you have multiple virtual hosts, you can either make sure the site you are looking to test is listed first, or you may also be able to set DNS entries into your router / gateway if you are lucky.
Related
I want to use Charles Proxy to share a local development PC's web server where I am developing sites on so that I can access the PC over my LAN to test on various mobile devices.
Having setup the correct ip address of my PC in the http proxy settings on various tablets they can all connect to the PC and this works fine.
The issue is that I need to test a wordpress site and as anyone that uses wordpress knows, it generates full url links between each page it serves. As the site normally runs on my PC the urls it generates are all http://localhost/wordpress/pagename.
So the issue is that if I access the same site from a remote device via the proxy (addressing http://192.168.1.200/wordpress/) it instantly redirects me to http://localhost/wordpress/pagename url in the mobile device and this fails to load as the tablet can't determine "localhost" correctly.
There must be a way of using one of Charles' various options to resolve this but I can't for the life of me work out which. I've tried remote maps and DNS spoofing but no joy.
Note, I'm completely aware that you can with SQL commands change the urls throughout a wordpress database but I just wanted to see if this was possible without undertaking this step as it would be a lot more flexible if I don't have to do that each time I want to preview sites via my other local LAN devics.
You can use Charles proxy feature called Rewrite Tool. I assume your local network uses 192.168.168.X IPs.
Enable rewrite
Add new rule and name it as you wish
To Locations section add Protocol: http and Host: 192.168.168.X
To Rules section add Type: body, Where: response, Match: localhost, Replace: 192.168.168.X
It may require some more tinkering but i hope you get the idea
I've developed a web app, which uses HTTPS and which works fine when I access is it (live). Yet some customers, who use proxy servers, can't access the site. I already tried to use a real certificate (a cheap one and only a trial, but yet valid), but that didn't help.
Everytime one of these users tries to access the site the browser tries to load it until a timeout occurs. One user even was shown an authentication (but I'm not 100% sure if this was due to a proxy, still waiting for response from the customer)
For which reasons can this happen and what can I do about it?
I'm using IIS, ASP.NET (C#) and JS. Sideinfo: The URL contains a port, the internal structure of the network the IIS is running in (not mine) doesn't allow it otherwise.
443 is dedicated port for HTTPS connectivity. Add type 'HTTPS' with default port 443 in Site bindings of hosted site directory. Check after whether SSL is enabled or not? in IE(browser)->Tools->Internet options->Advanced->Security.
If the HTTPS port in your web app's URL isn't port 443, you'll have a problem with corporate proxies that don't like non-standard HTTPS ports.
i.e. I hope your URL looks something like this: http://example.com:443/...
I have created a website and set it up on IIS on a Windows Server 2008 R2 which is on the local network. What should I do to be able to access that website by typing its name in the browser from client machine? Right now there're only two sites: One is the Default Website and the other one is my newly created one. If I type this IP in the browser of a remote computer, which has access to the server, the default website opens. If I add https:// to the ip address I get directed to my website. This means the website opened is decided upon the protocol (http or https). What if I add another website that would require SSL?
Actually the site you browse to is not decided by the protocol, it's decided by the port. By default HTTPS is port 443, and HTTP is port 80.
So if you have an HTTPS and HTTP protocol added to a website in IIS, you've created bindings for these two ports automatically.
This is visible by going into IIS clicking "Sites" from the "Connections" section in the left pane and then looking at the "Bindings" column in the center pane.
If you create another website on the host which uses SSL you would have to assign it to a different port.
To browse to that new SSL website you would have to enter the port when browsing to it.
e.g. https://serverName:444
(You don't have to enter default ports, 80 & 443, your browser automatically infers which to use from the protocol type and adds them if no other is present)
This is inconvient for users so people get around this by registering domain names such as stackoverflow.com and pointing them to the address with the port e.g. https://stackoverflow.com:444, so users don't have to enter port numbers.
Have you added the website address to the host file which sits in the drives folder of the system32. If you add the website name against the IP in the host file you should be able to access it using the name rather than than IP address
Something like this- 10.18.20.108 test.stackoverflow.com
We have a local instance of IIS 7 running with a website. Instead of the default "localhost" we have something like, mysite.compname.com. This is a separate entry into IIS 7 and the default website was removed to prevent confusion.
Then in our host file we an entry like this:
127.0.0.1 mysite.compname.com
Now when I try to hit this url, http://127.0.0.1/ApplicationName/Project/AddProject.aspx technically it should work, but instead I get a 404. I can vouch that this isn't a problem with the application, because if I navigate to http://mysite.compname.com/ApplicationName/Project/AddProject.aspx it works fine.
My end goal is to be able to give someone my computer name, so that they can visit a test page, so the url above I think would get turned into this http://computername/ApplicationName/Project/AddProject.aspx. Any help or at least links to understanding would help because I'm not sure where my issue is coming from.
It sounds like the IIS site / application is configured using a Host Header.
This means that the site will only respond if the host header sent by the browser matches the one configured for the site.
This is a standard method to allow one server to host sites for many host and domain names.
If you wish to allow others to view the site on your computer you will need to either have a local DNS server which you can edit, or, probably the easiest option, get them to edit their host files to include
<your IP> mysite.compname.com.
Remember to open the requisite ports (probably only 80, maybe 443 for https) in your firewall.
Or, you can try to edit the site config to remove or modify the Host Header requirement. See the first link for details, but be careful, it's easy to break things if you don't know the entire architecture of the site.
I have an IIS7 site that works fine while on the server, however refuses to work from anywhere on the network.
When logged onto the IIS Server itself (with remote desktop) then the website shows fine, as per this link (I used port 801 for this site):
http://localhost:801/
However when attempting to access this site from the network, it refuses to work, giving the generic 'cannot display the webpage' message, while using the following link:
http://<<my IIS server>>:801/
Another thing I have noticed however is that on the network the default page (port 80) of the IIS server DOES work. I.E this following link shows the standard IIS7 page:
http://<<my IIS server>>:80/
Most of the help topics I've read point to it being a firewall issue, however as a test I disabled all firewall settings on the IIS Server, yet it still refused to show.
Does anyone have any other suggestions?
Many thanks
Did you tried with computer name and / or IP Address
e.g: http://192.168.1.105:80/
http://DELL_PC:80/
Run the following tests:
Check connectivity from both computers.
Firewall settings, temporary disable the firewall from all profiles (private, domain, public) if this works, try adding a Port Rule to your firewall allowing incoming connections to port 80.
Also, it'd be important to check the bindings configuration of your website, bindings specify the address the server should listen to for incoming connections, make sure you have 'All Unassigned'.
Reference : Click Here !!