I need to be able to perform all of the available functions that the Package Manager Console performs for code first DB migrations. Does anyone know how I could accomplish these commands strictly through user defined code? I am trying to automate this whole migration process and my team has hit the dreaded issue of getting the migrations out of sync due to the number of developers on this project. I want to write a project that the developer can interact with that will create and if need be rescaffold their migrations for them automatically.
PM is invoking through PowerShell and PS cmdlets (like for active directory etc.)
http://docs.nuget.org/docs/reference/package-manager-console-powershell-reference
The Package Manager Console is a PowerShell console within Visual
Studio
...there is essentially very little info about this - I've tried that before on couple occasions and it gets down to doing some 'dirty work' if you really need it (not really sure, it might not be that difficult - providing you have some PS experience)
Here are similar questions / answers - working out the PS comdlets is pretty involving - in this case it has some additional steps involved. And PS tends to get very version dependent - so you need to check this for the specific EF/CF you're using.
Run entityframework cmdlets from my code
Possible to add migration using EF DbMigrator
And you may want to look at the source code for EF that does Add-Migration
(correction: this is the link to official repository - thanks to #Brice for that)
http://entityframework.codeplex.com/SourceControl/changeset/view/f986cb32d0a3#src/EntityFramework.PowerShell/Migrations/AddMigrationCommand.cs
http://entityframework.codeplex.com/SourceControl/BrowseLatest
(PM errors also suggest the origins of the code doing the Add-Migrations to be the 'System.Data.Entity.Migrations.Design.ToolingFacade')
If you need 'just' an Update - you could try using the DbMigrator.Update (this guy gave it a try http://joshmouch.wordpress.com/2012/04/22/entity-framework-code-first-migrations-executing-migrations-using-code-not-powershell-commands/) - but I'm not sure how relevant is that to you, I doubt it.
The scaffolding is the real problem (Add-Migration) which to my knowledge isn't accessible from C# directly via EF/CF framework.
Note: - based on the code in (http://entityframework.codeplex.com/SourceControl/changeset/view/f986cb32d0a3#src/EntityFramework.PowerShell/Migrations/AddMigrationCommand.cs) - and as the EF guru mentioned himself - that part of the code is calling into the System.Data.Entity.Migrations.Design library - which does most of the stuff. If it's possible to reference that one and actually repeat what AddMigrationCommand is doing - then there might not be a need for PowerShell at all. But I'm suspecting it's not that straight-forward, with possible 'internal' calls invisible to outside callers etc.
At least as of this post, you can directly access the System.Data.Entity.Migrations.Design.MigrationScaffolder class and directly call the Scaffold() methods on it, which will return you an object that contains the contents of the "regular" .cs file, the "Designer.cs" file and the .resx file.
What you do with those files is up to you!
Personally, I'm attempting to turn this into a tool that will be able to create EF6 migrations on a new ASPNET5/DNX project, which is not supported by the powershell commands.
Related
Full Error:
transactions.TransactionBuilder. - The transaction currently built is missing an attachment for class: com/gibtn/corda/printutilities/PrintLedgerTransaction. Attempted to find a suitable attachment but could not find any in the storage.
This has been asked here and here but I hope to get better clarification.
Problem:
I have built a set of libraries to perform common tasks in my Flows that I include in all my CorDapps. For now I just copy the JARs into each project, make some changes to the gradle files and everything works great.
I recently put together a small library for performing common tasks in Contracts and added the JAR the same way.
This works fine with MockNodes. But when I test with real nodes I will get this error in the CRaSH shell and the transaction will fail with a NoClassDefFoundError exception.
Question:
Is what I am doing even possible? Or do I always have to keep my utility classes inside the Contracts module in IntelliJ so they are bundled together with the Contracts into a single JAR? That way when the node starts the JAR (containing the Contracts and any utilities) is added to Attachment storage as a single Attachment.
I found a way to solve this. It's a bit dirty but initial testing seems to work. I just created a blank class in my utilities JAR that implements Contract. It's verify() method is empty. Now when the Corda node starts it sees this Contract and adds the JAR to Attachment storage. So from the CRaSH shell if I run:
attachments trustInfo
...my utility JAR will be listed (it wasn't before). I see when I use one of the utility methods in a Contract the utility JAR will be included as a separate Attachment in the WireTransaction.
I'm not crazy about this solution and will probably stop using a utility JAR for Contracts. I'll go back to copying the classes into each project. Nevertheless there is a way to do it. I would just need a more experienced Corda developer to give it their blessing before I'd go forward into production with it.
When trying to update service reference I get following error -
I read guide-line at many places that we should checkin only Reference.cs. But I have checked in other ServiceReference files, (like wsdl, xsd etc) as well.
Can this be a cause of UpdateService Reference to failure?
Sounds like you are targeting the wrong framework in your project or you need to completely delete the service reference and re-add it instead of trying to update.
Check this link out
http://connect.microsoft.com/VisualStudio/feedback/details/542789/could-not-resolve-mscorlib-for-target-framework-netframework-version-v4-0-this-can-happen-if-the-target-framework-is-not-installed-or-if-the-framework-moniker-is-incorrectly-formatted
Good Luck
I'm looking for a .NET coverage tool, and had been trying out PartCover, with mixed success.
I see that OpenCover is intended to replace PartCover, but I've so far been unable to link it with TypeMock Isolator so my mocked-out tests pass while gathering coverage info.
I tried replicating my setup for Partcover, but there's no defined profilename that works with the "link" argument for Isolator. Thinking that OpenCover was based on Partcover, I tried to tell Isolator to link with Partcover, and it didn't complain (I still had Partcover installed), but the linking didn't work - Isolator thought it wasn't present.
Am I missing a step? Is there a workaround? Or must I wait for an Isolator version that is friends with OpenCover?
Note: I work at Typemock
I poked around with the configuration a little bit and managed to get OpenCover to run nicely with Isolator. Here's what you can do to make them work together, until we add official support:
Register OpenCover profiler by running runsvr32 OpenCover.Profiler.dll (you will need an Administrator's access for this).
Locate the file typemockconfig.xml, it should be under your installation directory, typically C:\Program Files (x86)\Typemock\Isolator\6.0.
Edit the file, and add the following entry towards the end of the file, above </ProfilerList>:
<Profiler Name="OpenCover" Clsid="{1542C21D-80C3-45E6-A56C-A9C1E4BEB7B8}" DirectLaunch="false">
<EnvironmentList />
</Profiler>
Save the file, you will now have a new entry in the Typemock Configuration utility, called OpenCover. Press the Link button to link them. You will now be able to run your tests using OpenCover.Console.exe and Isolator. For example, here's how to run your tests with MSTest:
OpenCover.Console.exe
-target:"C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe"
-targetargs:"/testcontainer:"d:\code\myproject\mytests.dll"
-output:opencovertests.xml
There is still a minor issue running this with TMockRunner -link (that is, with late linking). I will need to look at it further at work.
Hope that helps.
I'm trying the sample demo of selenium flex API. After following the instructions on the main page for compiling the project with sfpi.swc and taking the generated selben.swf in bin directory and trying to run some test(assertFlexText) using Selenium IDE, I get the following error:
[error] Function getFlexText not found on the External Interface for
the flash object selben
I have tried several other flex tests and got error messages similar to the one mentioned above.
For some reason I believe that the generated selben.swf through the automatic build of project in flex builder is not the desired one, though it didn't indicate any build problem after including sfpi.swc.
Any idea?
I use SeleniumFlex Api and SeleniumIde for my projecy with excellent result BUT using my own version of each of one. Your error maybe is for not include the lib of SeleniumFlexApi in the compile time( -include-libraries "libs\SeleniumFlexAPI.swc" ).
After that u can enable capture and replay with SeleniumIde change the main source (read this post) and use the user-extensions.js (in the SeleniumFlexApi project) with the SeleniumIde user option. Its really easy.
With these change u can capture and replay in firefox (v 3.06 or minor) and after that, if u use java, u can use Flex-UI-Selenium, Flash-Selenium for ur integration test with SeleniumRC.
I hope this information be usefull. I u have any question let me know.
What method do you use to get a compile time error when the database schema changes occur in an ASP.NET project?
For example, if you have a GridView bound to a DataSource, I can only get runtime errors when a schema change occurs, not a compile time error. Intellisense works fine on the code behind using datasets, LINQ, etc, but I cant seem to get a compile time error on an ASP.NET page when I change the schema.
Any advice?
Create a unit test that verifies the correctness of you data access layer, and make sure it covers all your DB-related code. Not everything can be caught at compile time...
One way I can think of easily achieving this behavior would be to databind to a dynamic DAL. There are some tools that can help do this DAL generation, I'd recommend taking a look at SubSonic.
Once you have something like SubSonic in place you can bind to the resulting business objects. These business objects will automatically change in the case of a schema change in the database and this will break your binding code which will result in a compile time error.
Update
Assaf's recommendation to use Unit Tests is also a good idea. It doesn't solve your stated problem but it is definitely something that should be in place and is a great tool for flagging these type of problems.
We use a modest system (xml to c++) to create schemas from an independent description, this system also creates names for tables and columns that we use inside the code, when there is a change in the schema the names change, as the names we originally used are not there anymore and the compiler will flag an error.
You could probably configure a lot of the DAO generation tools to do something similar.
One solution would be to version your database and map an application build to a specific version (maybe in a properties file). In the entry point of your app, you can compare the expected version to the actual version and handle the error accordingly.
I'm not sure whats the equivalent in ASP.net of Migrations in Rails or dbdeploy in Java for versioning your database. But any DB versioning tool that makes schema changes incremental and versioned and tracks the version in a Version table will suit the purpose.
But if you want a compile time error while building your app, you might as well upgrade your schema to the latest version as part of your build process, avoiding the possibility of schema changes in the first place.