this plugin is showing following error :
"Warning: preg_match() [function.preg-match]: Compilation failed: missing terminating ] for character class at offset 4"
I tried to solve it by adding \ at fourth offset, error was removed but now plugin is not working properly.
What is the full error message? There should be a particular php file at the end of the error.
There's probably an error in your permalink structure, or if you added some type of permalink plugin. Or you're probably getting that error because your blog has no content. It also could mean that you're using an older version of the plugin. Again, it's difficult to say without the entire error message, and what php file is causing the problem. But you can try changing this:
Code: Select all
if (preg_match("/$bad/i", strtolower($comments))){$allow = false;}
to this:
Code: Select all
if (#preg_match("/$bad/i", strtolower($comments))){$allow = false;}
Related
I'm receiving the following error on my WordPress website:
Fatal error: Class 'wpforge_walker' not found in
/home/content/25/11572025/html/site/wp-content/themes/wp-starter/content-nav.php
on line 317
On my FTP File Manager, line 317 on "content-nav.php" shows the following:
'walker' => new wpforge_walker( array(
After reading on this issue other forums mentioned how removing the parenthesis might solve the problem. Accordingly, this is how I saved the "content-nav.php" file:
'walker' => new wpforge_walker
After refreshing my website, it is showing the following error:
Parse error: syntax error, unexpected ''in_top_bar''
(T_CONSTANT_ENCAPSED_STRING), expecting ')' in
/home/content/25/11572025/html/site/wp-content/themes/wp-starter/content-nav.php
on line 319
I went back to my FTP File Manager and put back the "( array(" into the "content-nav.php" file and now I'm back to my initial problem.
Any assistance would be appreciated. Thanks!
You are using the Theme wp-starter, can you share any more info about it, developer, website, etc.?
Share a bigger chunk of code from content-nav.php, for example rows 300 till 350. Make sure you include the complete block of code.
Removing ( array( will result in another error. This is normal because it will completely break the function.
Some info about the error.
The code wants to load the class wpforge_walker, but it isn't available. Something went wrong with including the file that contains that particular class.
In the error log, do you see another returning log (notice or something else) before the fatal error? I'm looking for an include_once() / No such file or directory error, or something like that.
Another option is to re-upload ALL theme files, maybe an update or something else did not complete correctly. You can overwrite all theme files savely.
Edit: re-upload all theme files fixed the problem.
Disable theme to get WP admin access.
Using FTP or a hosting filemanager you can rename the theme folder, example 'wp-starter-off'.
WP will then deactivate the theme and you can access WP again.
Regards, Bjorn
I am working on a site that is having issues when google tries to crawl over it. (I just inherited this site.) Google is returning a 500 error that it can not find the page. I have done some debug but I am stumped on what more to do.
Here is what I know:
When google crawls the site it gets a 500 from some pages. All the pages with the error seem to be "~/content/~" pages.
When I try to manual fetch the page I also get the 500 error message.
The issue only happens sometimes.
Viewing the webpage in a browser gives no indication that anything is wrong.
This is the error message from my error log.
[17-Jul-2013 21:29:58] PHP Parse error: syntax error, unexpected $end in
/home/~/public_html/sites/all/modules/ctools/plugins/access/php.inc(55) : eval()'d code on line 1
Sometime it says line 1 or line 2.
If I comment out the line below, the error goes away. I don't know what the function below does and if getting rid of it does any harm.
// Provide a summary description based upon the checked roles.
function ctools_php_ctools_access_summary($conf, $contexts)
{
return !empty($conf['description']) ? check_plain($conf['description']) : t('No description');
}
I spoke with the hosting company and they said everything is "OK" on their end.
I submitted a question to the google forums and all the tools that they had me run against the site seemed to return successful information.
The problem seems like its getting progressively worse over time.
The apache log does not have any error messages in it.
From the durpal Admin panel - Node template. When I select contexts for the column variant sometimes I get the WSOD.
I don't see any php code anywhere that could be causing an error.
Does anyone have any ideas what could be going on?
PHP Parse error: syntax error, unexpected $end.... if it's the case
means that PHP has finished analyzing your code, but you forgot to close a symbol somewhere in your page or in those that are included.
Check:
you may forgot to close a quote, so PHP continues to analyze your code until it finds the closing quotation-mark.
You may forgot to close a bracket, so from the last opening, PHP thinks all the code that follows as part of a block that never ends.
You may forgot to close a parenthesis, so from the last open parenthesis, it thinks all the code that follows as part of it and that is not ending.
You may forgot a comma
I'm using the default comments template, on my own self-built theme. When I send a comment I get the following error message:
Warning: call_user_func_array() expects parameter 1 to be a valid callback, function 'wp_set_comment_cookies' not found or invalid function name in /home/mattator/public_html/wp-includes/plugin.php on line 403
Warning: Cannot modify header information - headers already sent by (output started at /home/mattator/public_html/wp-includes/plugin.php:403) in /home/mattator/public_html/wp-includes/pluggable.php on line 881
couldn't find a call to the funciton 'wp_set_comment_cookies' anywhere in the code. It is noteworthy that despite the error message the comment is being sent properly. I also tried to disable all plugins but the problem persists.
Any ideas would be appreciated.
May be you have some extra white space before
<?php
tag in starting of a theme file
Thanks
Well, I experimented a little bit, and as turns out the problem was a call to the function "nocache_headers()", in Line 18 of the file "wp-comments-post.php" which lies at WP root directory.
I deleted it, and voila, everything works. Not sure why though.
I'm getting this warning message on a Wordpress I have just setup:
http://wptest.paddingtonterraces.com.au/
Warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, 'gllr_add_script' was given in /home/paddingt/public_html/wptest/wp-includes/plugin.php on line 403
Anyone know how to sort this one out?
Deactive your plugins and theme and activate them one by one so you will find out which component causes the problem or which plugin does the function comes from.
It's looking for a function named gllr_add_script... does that function exist?
I created a javascript file TTW for a quick fix to something i was working with, and when i went to the portal_javascripts and added it there i was met with this error upon saving:
Exception Type: CompilerError
Exception Value: Path element may not be empty in 'portal/http://www.example.com/portal_skins/cloud.js'
I get that same error every time i attempt to navigate to the portal_javascripts through the ZMI, it's obvious that I incorrectly entered the id of my file, but now I can't even fix it.
I was able to find this example of someone with a similiar issue, but I have no how to go about his fix
http://markmail.org/message/zbjhjoezz2h423yr#query:+page:1+mid:yhgjekdkwnegwqen+state:results
Try this:
http://example.com/portal_javascripts/unregisterResource?id=[your_js_resource_id]