I cannot get test level variables to appear in documentation.
Let's say I have this testsuite:
| *Variables* |
| ${SystemUnderTest} = | Staging
| *testcase* |
| Device Test |
| | Set Test Variable | ${device} | iPhone
| | [Documentation] | Device is: ${device} |
| | ... | System is: ${SystemUnderTest} |
| | No Operation
That produces this log:
TEST CASE: Device TestExpand All
Full Name: T.Device Test
Documentation:
Device is: ${device} System is: Staging
Notice that the Suite level variable is treated properly, but the test level one is not.
How do I get all variables to be treated equally?
Starting with robotframework 2.7 there is a built-in keyword named Set test documentation, which can be used to replace or append to the existing documentation. This will not affect the output in the console, but the changes will be reflected in the log and report.
For example:
| *Variables* |
| ${SystemUnderTest} = | Staging
| *testcase* |
| Device Test |
| | Set Test Variable | ${device} | iPhone
| | [Documentation] | Device is: ${device} |
| | ... | System is: ${SystemUnderTest} |
| | Substitute vars in documentation
| | No Operation
| *Keywords* |
| Substitute vars in documentation
| | ${doc}= | replace variables | ${test documentation}
| | set test documentation | ${doc}
For more information see http://robotframework.googlecode.com/hg/doc/libraries/BuiltIn.html?r=2.7.7#Set%20Test%20Documentation
This solution feels a little hackerish to me, but it does give you the functionality that you want.
Test.txt
| *Setting* | *Value* |
# This should start as the value for your first test
| Suite Setup | Set Suite Variable | ${device} | foo
| *Test Case* | *Action* | *Argument*
#
| T100 | [Documentation] | Should be foo: ${device}
# Do some stuff
| | No Operation
# This setups the device name for the next test.
| | Set Suite Variable | ${device} | bar
#
| T101 | [Documentation] | Should be bar: ${device}
# Do some stuff
| | No Operation
| | Set Suite Variable | ${device} | bing
#
| T102 | [Documentation] | Should be bing: ${device}
# Do some stuff
| | No Operation
When I run the suite I get this output:
==============================================================================
Test
==============================================================================
T100 :: Should be foo: foo | PASS |
------------------------------------------------------------------------------
T101 :: Should be bar: bar | PASS |
------------------------------------------------------------------------------
T102 :: Should be bing: bing | PASS |
------------------------------------------------------------------------------
Test | PASS |
3 critical tests, 3 passed, 0 failed
3 tests total, 3 passed, 0 failed
==============================================================================
Having the device variable set at the end of the previous test is a little unclean, but as long you leave a comment it shouldn't be unclear at all.
Related
Trying to create a volume backup both using the web UI and the cmd and keep getting errno 22. I'm unable to find information about the error or how to fix it. Anyone knows where I should start looking?
(openstack) volume backup create --force --name inventory01_vol_backups 398ee974-9b83-4918-9935-f52882b3e6b7
(openstack) volume backup show inventory01_vol_backups
+-----------------------+------------------------------------------------------------------+
| Field | Value |
+-----------------------+------------------------------------------------------------------+
| availability_zone | None |
| container | None |
| created_at | 2021-08-03T23:45:49.000000 |
| data_timestamp | 2021-08-03T23:45:49.000000 |
| description | None |
| fail_reason | [errno 22] RADOS invalid argument (error calling conf_read_file) |
| has_dependent_backups | False |
| id | 924c6e62-789e-4e51-9748-927695fc744c |
| is_incremental | False |
| name | inventory01_vol_backups |
| object_count | 0 |
| size | 30 |
| snapshot_id | None |
| status | error |
| updated_at | 2021-08-03T23:45:50.000000 |
| volume_id | 398ee974-9b83-4918-9935-f52882b3e6b7 |
+-----------------------+------------------------------------------------------------------+
The issue was caused due to a bug in Cinder version 16.2.1.dev13. Updating cinder to the latest version solved the issue
So...I'm facing a problem which I need the available amount of resources (and how are they being used) in the DCs (focusing on each project/server/network consume) of my Openstack (Stein) through python code (cause the other functionalities are in python and I don't like mixing languages if it have support for a functionality).
Are there any support for this on OpenstackSDK libraries? If yes, where to find the API documentation (or code examples of usage). If don't, why?
You can use existing Nova APIs to list down Compute capabilities and available resources.
nova hypervisor-stats
+----------------------+-------+
| Property | Value |
+----------------------+-------+
| count | 2 |
| current_workload | 0 |
| disk_available_least | 1378 |
| free_disk_gb | 1606 |
| free_ram_mb | 47003 |
| local_gb | 1606 |
| local_gb_used | 0 |
| memory_mb | 48027 |
| memory_mb_used | 1024 |
| running_vms | 0 |
| vcpus | 28 |
| vcpus_used | 0 |
+----------------------+-------+
You can automate it by wrapping it in shell or calling python-openstack lib.
When rendering tables such as this one (using RStudio + knitr), there is unwanted indentation (see red zone in the image). How can I avoid such indentation?
I imagine there is some CSS involved, but if there was a way to even prevent rmarkdown from "considering" this as a list, it could simplify matters. This is needed for an R package, so heavy hacks are not really an option, but I'll gladly receive all suggestions. Thx.
The (grid) table:
+------------------------+------------------------------------+
| Variable | Stats / Values |
+========================+====================================+
| SomeVar1 | mean (sd) : 1500000.5 (288675.28)\ |
| [numeric] | min < med < max :\ |
| | 1000001 < 1500000.5 < 2e+06\ |
| | IQR (CV) : 499999.5 (0.19) |
+------------------------+------------------------------------+
| SomeVar2 | 1. AAAAAA\ |
| [factor] | 2. BBBBBB\ |
| | 3. CCCCCC\ |
| | 4. DDDDDD\ |
| | 5. EEEEEE\ |
| | 6. FFFFFF\ |
| | 7. GGGGGG\ |
| | 8. HHHHHH\ |
| | 9. IIIIII\ |
| | 10. JJJJJJ\ |
| | [ 102917 others ] |
+------------------------+------------------------------------+
The rendered html table:
When I create new image using glance does not matter if using cli or gui I am getting returned code 0 and image is created but its size is zero.
The behavior is slightly different as from GUI my browser crushes but stil image is created from cli I am getting return code 0.
Command:
openstack image create --file cirros-0.4.0-x86_64-disk.img --disk-format qcow2 --container-format bare --public --debug cirros-deb
+------------------+------------------------------------------------------+
| Field | Value |
+------------------+------------------------------------------------------+
| checksum | d41d8cd98f00b204e9800998ecf8427e |
| container_format | bare |
| created_at | 2018-01-20T23:24:47Z |
| disk_format | qcow2 |
| file | /v2/images/c695bc30-731d-4a4f-ab0f-12eb972d8188/file |
| id | c695bc30-731d-4a4f-ab0f-12eb972d8188 |
| min_disk | 0 |
| min_ram | 0 |
| name | cirros-deb |
| owner | a3460a3b0e8f4d0bbdd25bf790fe504c |
| protected | False |
| schema | /v2/schemas/image |
| size | 0 |
| status | active |
| tags | |
| updated_at | 2018-01-20T23:24:47Z |
| virtual_size | None |
| visibility | public |
+------------------+------------------------------------------------------+
clean_up CreateImage:
END return value: 0
I tried with different cirros image and with ubuntu cloud image always behavior is the same.
Under /var/lib/glance/images file is created with size 0:
-rw-r-----. 1 glance glance 0 Jan 21 00:24 c695bc30-731d-4a4f-ab0f-12eb972d8188
grep c695bc30-731d-4a4f-ab0f-12eb972d8188 glance/api.log
2018-01-21 00:24:47.915 1894 INFO eventlet.wsgi.server [req-7246cd30-47c4-41a5-b358-c8e5cc0f4e56 8bd3e4905ffb4f698e2476d9080a7d90 a3460a3b0e8f4d0bbdd25bf790fe504c - default default] 172.19.254.50 - - [21/Jan/2018 00:24:47] "PUT /v2/images/c695bc30-731d-4a4f-ab0f-12eb972d8188/file HTTP/1.1" 204 213 0.111323
2018-01-21 00:24:47.931 1894 INFO eventlet.wsgi.server [req-28e0cda2-c9f7-4543-b19a-d59eccffa47e 8bd3e4905ffb4f698e2476d9080a7d90 a3460a3b0e8f4d0bbdd25bf790fe504c - default default] 172.19.254.50 - - [21/Jan/2018 00:24:47] "GET /v2/images/c695bc30-731d-4a4f-ab0f-12eb972d8188 HTTP/1.1" 200 780 0.015399
Any idea what can be wrong?
Find location of python glance client.
find / -name http.py
vi /usr/lib/python2.7/site-packages/glanceclient/common/http.py
- data = self._chunk_body(data)
+ pass
Referenc:
https://bugs.launchpad.net/python-glanceclient/+bug/1666511
https://ask.openstack.org/en/question/101944/why-does-openstack-image-create-of-cirros-result-in-size-0/?answer=102303#post-id-102303
I have a list of publisher that looks like this :
+--------------+
| Site Name |
+--------------+
| Radium One |
| Euronews |
| EUROSPORT |
| WIRED |
| RadiumOne |
| Eurosport FR |
| Wired US |
| Eurosport |
| EuroNews |
| Wired |
+--------------+
I'd like to create the following result:
+--------------+----------------+
| Site Name | Publisher Name |
+--------------+----------------+
| Radium One | RadiumOne |
| Euronews | Euronews |
| EUROSPORT | Eurosport |
| WIRED | Wired |
| RadiumOne | RadiumOne |
| Eurosport FR | Eurosport |
| Wired US | Wired |
| Eurosport | Eurosport |
| EuroNews | Euronews |
| Wired | Wired |
+--------------+----------------+
I would like to understand how I can replicate this code I use in Power Query :
search first 4 characters
if Text.Start([Site Name],4) = "WIRE" then "Wired" else
search last 3 characters
if Text.End([Site Name],3) = "One" then "RadiumOne" else
If no match is found, then add "Rest"
It does not have to be case sensitive.
Using properCase from ifultools package and gsub, we replace everything after first word with "" i.e delete it and treat the exceptional case of Radium separtely. If you have many exceptions like Radium case, please update your post with those so that we can find a neater solution to this hack :)
library("ifultools")
siteName=c("Radium One","Euronews","EUROSPORT","WIRED","RadiumOne","Eurosport FR","Wired US","Eurosport","EuroNews","Wired")
publisherName = gsub("^Radium$","Radiumone",gsub("\\s+.*","",properCase(siteName)))
# [1] "Radiumone" "Euronews" "Eurosport" "Wired" "Radiumone" "Eurosport" "Wired"
# [8] "Eurosport" "Euronews" "Wired"