Recently I started seeing the following nonsense with the satellite images in my Google Earth plugin:
The incorrect tiles fade in and out as I zoom, and at some zoom levels everything looks fine.
This happens across browsers (chrome, IE9, Firefox), but only on my machine. I've tried re-installing the plugin, but that didn't seem to help.
I'm using plugin version 6.2.2.6613
Does anyone know what might be causing this problem?
I have seen this problem before and again recently. The first time I was told it could be conflicts with the hardware accelerators but then the problem just went away.
Until recently I have had two instances of the plugin running in the same desktop application with no problems. Then a couple of days ago I started seeing the problem again although it is not happening today. I don't know if it would help but I would suggest rebooting your computer.
I've also wondered if Google was updating the plugin or the maps...
Sorry I can't be of any help but I suspect it will go away soon.
It looks like a DirectX issue to me. One possibility to fix is to force the plugin to use OpenGL instead.
You can control whether the plugin usese DirectX or OpenGL by altering the registry key:
HKLM\SOFTWARE\Google\GoogleEarthPlugin\Render\RenderingApi
The allowed values are:
0 (DirectX)
1 (OpenGL)
Try setting the value to use OpenGL to see if it resolves the issue.
Also, if it is a DirectX issue you could try disabling direct3D (as well as and texture acceleration) via the dxdiag as others have suggested.
Finally, you could also try disabling write combing on your card if it is enabled. This is usually done via the display properties for the card you are using.
I found that problem only occurs when I have multiple instances of the plug-in running. Especially if I have it running in two different browsers at the same time.
Related
I have a Wordpress website located here: http://www.rightfittech.com/mydermakare/.
I'm trying to figure out why the page loads slow - I'm almost sure it has to do with Flash and size of images, plus rotating banner. I don't know how to edit or fix the problem though. So the question is: What is causing my website to load slow, and what EXACT steps can I take to fix the problem.
I've already tried adjusting some of the browser ActiveX filters and other temp fixes, but that is not the proper solution. If this is a flash or image loading issue, can you tell me the EXACT step in how to edit these issues?
Any help would be appreciated.
Thanks, Rob
Something that could actually be causing you plenty of issues is that fact that you are embedding 2 different versions of jQuery
1.6.1 in jQuery.js
1.4.2 in, funnily enough, jquery-1.2.6.min.js
Other than that, the Website is loading absolutely fine for me here in the UK, including the massive Flash film.
I've had a quick inspection with Google Chrome Developer Tools (check the Network tab) and there doesn't seem to be any major offenders.
Which is a great tool for checking speed issues with individual resources.
Yahoo's YSlow is pretty neat as well, especially when integrated as an extra tab within Firebug for Firefox.
Has anyone successfully gotten swfaddress to work with IE8 and above?
It seems that when using standards mode, swfaddress will appear to work fine in IE8 and IE9, however, once the user modifies the hashtag in the address bar, the history list becomes corrupted.
In cases where the user starts the application via the hash tag (http://myapp.com/#/test), and then visits another hash (http://myapp.com/#/test1), the history is never saved.
I have tried playing around with swfaddress 2.5 in the svn repository. Interestingly,
the code is similiar to JQuery Address (by the same author). I also note that JQuery Address suffers from the same problem.
If I turn on compatibility mode in IE, the swfaddress and JQuery Address works perfectly. I have been looking into how compatiblilty mode works, and it does not seem like it would modify or affect javascript execution.
Was anyone able to successfully solve this issue? If not are there any other deep linking libraries for flex or flash that contains all the feature sets of swfaddress?
After looking at libraries such JQuery Address, other JQuery state management plugins and even the BrowserManager that ships with Flash and Flex builder, I discovered that they all ran into the same issue as SwfAddress.
At the moment, SwfAddress offers that best features and comes with a .swc and .as files to easily interface with Flash and Flex applications.
Since the other javascript libraries ended up with the same problems, I have decided to stick with SwfAddress.
On a related note, the author has stated that he is no longer working on SwfAddress, so it would be cool if someone in the community can pick up on where it was left off.
While developing a website I experience a weird bug.
From time to time my images or my css are missing.
It's not really predictable and therefore not reproducible.
Usually it happens after I edit my css, save it and reload the page (in the browser).
It's always syntactical correct CSS, so no compilation erros or anything similar.
I think it's the way Grails updates the running application, but I really can't say why or where it happens as it is quite rarely, but definitely annoying.
It doesn't matter if I run the application with my IDE (IntelliJ 9.0.4) or with the commandline (Windows).
The only thing I did not test so far is whether it happens only when I use the IDE or not.
Did anyone experience this?
EDIT:
Sorry for an unclear description:
"missing" means the browser is unable to load the corresponding ressource: "The Ressource () is not available"
Another Edit:
Thanks for the comments so far.
In addition to my main css-file and my images, which change quite frequently, my reset-css-file disappeared. I never touched it since creation, so I think one can exclude the compilation-script as cause of this mess. (further info in the comments)
Like John Smith I arrived here googling for this problem.
But I found another solution, and i hope that it helps you too.
I googled a little bit more and found this discussion Disabling static resource stuff, here i found a contributor of grails application, and author of Resources Plugin, Mark Palmer (take a look his website), telling what he is doing and answering the questions about this plugin.
Today, all you need to do is to update the Resources Plugin to version 1.2-RC1 or a recent one that will fix this problem.
When you say missing, do you mean that the changes are missing, or the whole stylesheet is missing? If it is just your latest changes, it is possible that your browser is caching the previous css file and isn't getting the latest changes. Try doing a "hard refresh" with something like CTRL+F5, or whatever hard refresh is in the browser that you are using. This will force a pull of the latest resources.
Really old question.. but for anybody googling this - I had similar issues with my CSS because of Windows file format on the Linux systems. Once I changed the format to unix, I still had to restart the server for the css to download. Note that somehow the css were downloading earlier although the format was windows and the issue was intermittent.
I am trying to use plone 4 with deco, using this buildout: http://svn.plone.org/svn/plone/plone.app.deco/buildouts/dev/
It seems to work, but when I add the new page element nothing special happens. (No deco.gs)
Anyone knows what is happening? or know a way of making it work with plone 4?
Deco is still experimental as of this writing, and shouldn't be used in production just yet.
Steps to get it working (what's currently working, that is) can be found in the install docs:
http://svn.plone.org/svn/plone/plone.app.deco/trunk/docs/INSTALL.txt
As far as i am aware, there has recently been a refactoring leaving the Deco UI editor not in a workable state. It shouldn't be a lot of work to repair, but it would be best if one of the core developers would do it.
Your best bet is probably asking on the plone.dev list to make someone do a small development push.
I've got this very odd bug that appears to be a quirk in Visual Studio 2010: Sometimes, when moving the cursor into double quotes of a CSS style="" attribute the cursor refuses to move. I can't type anything, and the keys that respond are the UP/DOWN cursor keys and the DEL key (but not BACKSPACE).
Typing does nothing, but pushing LEFT/RIGHT on the cursor keys produces the following error:
The operation could not be completed
I've got no idea what's causing this, but I would hazard a guess that Intellisense is getting very confused and bugging out.
At the moment, whenever this happens, I have to write any CSS outsite of the double quotes of the style attribute and then place the cursor where I want the CSS to appear (using the mouse) and press CTRL-V to paste it in. Very annoying :(
There must be a way of fixing this problem...?
Hopefully someone has an answer!
Just encountered the issue in VS 2012, in editing C#.
I noticed that the problem had occurred soon after the trial period of Resharper has ended and i inserted a valid license number. It also happened in only some of the source files.
The solution: Tools->Options->Resharper: Suspend.
Try typing - should work now.
Then: Tools->Options->Resharper: Resume.
Problem gone.
I have encountered this using Visual Studio 2013 and Resharper 8.2.1. None of the solutions provided in this thread worked (even suspending and resuming Resharper)
After contacting JetBrains support, it turned out to be a caching issue.
Deleting all the files from the following directory solved the issue, as Resharper re-creates new caches:
C:\Users\[Username]\AppData\Local\JetBrains\ReSharper\v8.2\SolutionCaches\[Project_reference]
I have some odd issues with the editor occasionally, a workaround for me is:
Ctrl-Tab (x2) to another code file and back to the same code (or alt tab to another app and back, one of these two... can't replicate issue to be sure)
An ultimate solution might be a re-install.
Microsoft have had variations on this problem reported quite a few times via their support portal. Here is one post and if you scroll down you will see a comment with a bunch of other reports all detailing similar(ish) problems.
Microsoft doesn't seem to be able to reproduce the problem but are "duping all the similar keyboard locking problems to a central bug, so that we can think a way to log the events if necessary". Which seems to be a generic response to a lot of these posts. Some people reported that it was simply becuase another window/pane/tab was in focus but I can see the OP obviously did not have this specific problem. Looks to me like one of those random unresolvable bugs. Hope I never get it! There's also numerous forum posts around the Internet, where users stated that removing certain 3rd party plugins has solved this issue.
I just spotted this particular post which has a possibly useful comment on it for you (which also link to this SO post. As I do not have the bug I cannot test its validity for you. The main point of it seems to be something about the keyboard layout switching.
I'm sorry for putting all this into an answer when technically it is not an answer and just a mass of research, but there was no way this was gonna fit into a comment. And also sorry for pretty much link spamming, but again there was no way I could extract everything that they said into this post. I hope there is something useful in there for you :)
EDIT: You should probably check the top rated answer below as this seems to solve a number of peoples issues, although I never had the Resharper plugin and still occasionally experienced this, but now I'm on VS2013 and have not had this problem re-occur, so maybe they fixed it...
Empty the solution cache folder
C:\Users\{UserName}\AppData\Local\JetBrains\ReSharper\v8.2\SolutionCaches\
This was suggested by JetBrains support when I contacted them.
Permanently fixing... Not too sure however I found that pressing pressing Ctrl+Shift+Caps Lock+Tab all at once seems to get rid of this and enables the mouse and keyboard again. I know this isn't the best of solutions but it works.
I have the same problem several times a day. I didn't notice it until I installed the web essentials extension. I just uninstalled it and will see what happens. I have tried reinstalling visual studio with no joy (but again, I didn't notice the problem until after I had already installed the various extensions).
Sometimes, closing and re-opening the specific code window I'm working in fixes it. If that fails, sometimes I close all windows and reopen just the one I was actively editing. If all of that fails it usually requires a complete restart of visual studio.
I find it funny that MSFT says that they can't duplicate the problem. Scott Guthrie experienced it first hand during his MVC4 beta demo here at about 28 minutes in.
UPDATE: So far, as of 4-5-2012 9:33am Central Time, the problem hasn't recurred since uninstalling Web Essentials. This is the longest I've gone without this bug occurring. If I make it through the next 24 hours, I'll be confident in blaming Web Essentials.
UPDATE: 4-6-2012 10:05am Central Time: Well, apparently it wasn't Web Essentials. It happened to me again this morning editing the contents of a block in my _Layout.vbhtml file. Closing the tab and reopening it fixed it.
I frequently encounter this editor freeze, not just on CSS quotes but any file arbitrarily. I have a dual monitor setp and I have the doucment windows one one monitor and all tool windows on the next one. Sometimes, certain tool windows would freeze too (i.e. not respond to click).
Previously, I used to shutdown/restart IDE; but serendipitously, I discovered that switching to/from Full Screen mode, restores sanity. So now everytme I see a freeze, mode switching comes to rescue.
Not sure if this will solve your issue, but worth a shot.
Rant: In general, I find this new WPF based product very falky and unstable than its predeccessors.
I have the same problem on IDE, some times the Return key is not working at all...
My solution is: CLEAN the project/solution.
BTW: CLEANing resolve also other unexpected behaviours after amendements on CSS or HTML.
I tried every other workaround here but nothing seemed to work, and the issue was only present in one solution but not another.
Disabling Resharper fixed it temporarily but it came back after re-enabling it which wasn't a viable long-term solution.
What worked for me was disabling all Resharper Extensions (Under Resharper -> Extension Manager). I was able to type again even after re-enabling all of them, so I'm unsure which extension specifically caused the issue, but that's another route to try for people who still have this issue.
I never had the problem until I installed plugins/extensions. Curious to know if anyone has had this problem without having any plugins/extensions installed. I don't know if they are the actual cause but since benefits of the plugins outweigh the occasional lockup, I have left them installed. BTW, I use the "closing/reopening of the window with the lockup" technique.
Using a source control (GIT, AKSVN)? If so, disable it, restart VS then enable it and open the solution again.