If I want to detect the number of connections active on my home Wifi network, how should I go ahead doing it? This can be useful for building applications which would serve as monitoring unidentified/unrecognized people being fraudulently misusing a person's Wifi network.
How to know whether your neighbors or others are using your wireless network is rather complicated.
If your neighbors are experienced Wi-Fi hackers, you might not be able to tell at all.
If they're just stealing your Internet connection, you may be able to tell from the logs on your router.
To find out who's on your wireless network, you'll need to start by taking inventory of all the devices that are meant to be connected. Find out their MAC IDs and their IP addresses (if they're static).
To find out the MAC ID/IP address on a PC, click the Start menu and choose Run. Type cmd and click OK. In the screen that opens, type ipconfig /all and hit Enter. The MAC address will be shown as the physical address. Once you know the MAC addresses of each of the PCs on your network, you will recognize any addresses that don’t belong under the screen that shows the MAC addresses of current connections.
Check IP addresses
Likewise you may be able to see how many IP addresses have been dished out by the DHCP server. If you check the IP addresses of each of your PCs, you can see if other IP addresses have been served.
To find out your IP address from the Start menu, click Run. Then type in cmd and click OK. In the screen that comes up, type ipconfig which will display the IP address for that computer. (Bear in mind, however, that if the PC is set to auto detect settings, then the PC's IP address will change the next time the computer is rebooted or switched on. Sometimes previously served numbers have not yet expired, so you may think someone is connected when they are not.)
Dealing with intruders
If you do find someone using your connection, they may well not be doing so maliciously or even knowingly. Sometimes people can’t tell which is their own connection and they may honestly believe that they are using their Wi-Fi router rather than yours. The best way to deal with this is to set up your own security and maybe you can help them find their own router!
The optimal solution is to set up a strong password using WPA or WPA 2 of almost 20 to 30 digits and numbers. Once your network is functioning, you can switch off the SSID broadcast (which prevents it from advertising the name of your network) so it would effectively disappear as far as your neighbors are concerned, and the first you might hear of it is when someone complains that their Web connection has disappeared.
You could look for logs such as current LAN clients, connection or status log, or connected MAC addresses.
Be Happy :-)
Do you have access to the Access Point management ?
Look for MAC addresses and their filtering. Modern APs allow you to filter devices and or limit the timeframe during which devices can authenticate themselves, using a hardware button.
A link on how to secure your AP here, and a good start to know what to play with !
You can Either USE this Command... On your Router or Modem... Some Modem's have console for Ping and Commands like that....
ipconfig -all
Related
I'm just beginning to learn about ARP and networks. Was wondering if in end to end communication say between facebook and my computer, do the 2 ends know each others mac addresses?
Or does only my router know my mac adress, and the directly next link from it know its, and so on so that facebook only knows (out of the devices in this particular communication) the mac adress of the final router to pass my request to it?
I watched a Stanford video that seemed explain my mac adress gets put into the ip packet that goes to my router which is then enclosed in a packed containing its mac adress which gets passed down the chain. But I imagine I must be misunderstanding this otherwise a VPN wouldnt be able to fool the other end unless I simultaneously spoofed my mac address, right?
Thank you!
Was wondering if in end to end communication say between facebook and
my computer, do the 2 ends know each others mac addresses?
No, they don't know.
Or does only my router know my mac address, and the directly next link
from it know its, and so on so that facebook only knows (out of the
devices in this particular communication) the mac adress of the final
router to pass my request to it?
Yes, check below for more details.
Over the www, can the server see my MAC address?
Not directly, but, there can be a trail of search to get upto your MAC address. Actually, MAC address changes in every hop of the packet's journey. So, your MAC address can be stored in packets received by the first router/system to which your system/router passes packets.
Only those devices can see a MAC address which are on the same LAN network.
I must be misunderstanding this otherwise a VPN wouldnt be able to
fool the other end unless I simultaneously spoofed my mac address,
right?
This is a very big story, but, in short, you could say that VPN's can fool in the cases when the MAC address has been spoofed or the proxy agent/server has been used for retrieving the same information. So, in that case, one can't get directly to the MAC address. But, remember, nothing is impossible, just hard.
I am person trying to learn networking. I understand that this may not be the best first step to take, but I am eager to try and understand how this takes place because it has been tearing up my mind for quite a while now.
My question is, how does a network recognize a device and automatically connect it to the network?(This is assuming, of course, that you have connected to the network previously and are connecting wirelessly.)
Does it store it on the routers side and then look for specific MAC Addresses and then connect it? Or is it stored somewhere on an encrypted file on your computer? Or is it none of these? Please forgive me if I am way off, I am only giving guesses from what I have so-far learned from networking.
'Connect it to the network' doesn't really mean anything, other than just plugging it in, or turning it on in the case of Wifi. What really happens is that the device broadcasts a DHCP request for an IP address, or else It already has an IP address in that subnet. From that point on it is discoverable by ARP, so other hosts in the subnet can send to it.
Not sure if I should ask this question here, but this is a technology community so why not.
I'm running a local network which is setup like this:
Modem -> Access Point -> Switch -> Server/5 other computers
and my problem is the 5 other computers only two computers can have access to the internet (which are connected though Ethernet).
Also, any device that's connected to my wireless network can't access the internet either.
I know it's not a problem from my ISP since two computers are connected to the internet. And I know it's not a wireless problem since my local server can be reached though the access point.
I'm not sure what is the problem since I replaced all the cables, devices, and done tons of resets.
Appreciate your help, or direction to where I can get help.
Thanks all, but my problem was that I used static IP and didn't assign more than three, two computers and a printer. completely a beginner's mistake.
I don't know if you are familiar with computer networks but I think it's a network problem. Maybe your router (modem) can provide only two IPs and that's why only two computers can connect the internet. To verify this you can check what is your IP, and what is your Subnet Mask. Type ipconfig in your cmd and give me your IP and the subnet mask to check if this is the problem or not.
im wondering if it's possible to create p2p chat application without server(so there is no need in external static ip.Is it true?)?
EddieC is right if the computers are located inside the same sub-network (LAN) or if the computers'ip is their interface to the Internet (WAN public ip). In that case, you can just use the ip's and ports directly.
However, usually, knowing the computers ip is not enough because the machines are located behind routers inside sub-networks. Thus, because the computers are hidden behind the routers, you will have to configure the routers to foward the packets to the right computers as function of the ports used.
Have a look at : http://wiki.vuze.com/w/Port_forwarding
If you do not want to use ip's because they are dynamic, you can configure urls with Dynamic DNS services.
Good luck
It is possible. But you must have someway for one computer to tell the other computer what their IP number is. You could email it to your friend or call them on the phone or post it on a message board.
If this program only has to work on a local network (LAN), there is something called broadcasting which might be of interest to you. It allows a packet to be sent out to every device on the network without having to know their IPs (then other instances of your program could reply with the IP of their machines so you could set up proper connections).
This won't work over the internet, though (imagine being able to broadcast to every computer connected to the internet!).
I'm working on a Wake on LAN service that will run from a web site and should interact with many different platforms - therefore, no Windows-only solutions. When a user registers their system with the web site, I need to get the MAC address to use in constructing the "magic" packet. I have a Java Applet that is able to do this for me and am aware of an ActiveX control that will work, but I'm wondering if there is a way to do this server-side by querying routers/switches. Since the system may be on any of a number of different physical subnets, using ARP won't work -- unless there's a way to configure the router(s) to perform the ARP on my behalf.
Anyone know of any network APIs, proprietary or otherwise, that can be used to look up MAC addresses given an IP address? I think we're using Cisco routers, but it's a complicated network and there may be multiple vendors involved at various levels. I'd like to get some background information on possible solutions before I go to make a sacrifice to the network gods. No point in abasing myself if it's not technically possible. :-)
EDIT: We do have the network infrastructure set up to allow directed broadcast, though figuring out the exact broadcast address since netmasks are not always /24 is another conundrum that I need to solve.
If you are on a local network that uses DHCP you might be able to look in the servers database to get the MAC of the last user with that address. In the future you could watch the network for ARP requests and cache the responses in some sort of table. You might also look at using RMON or SNMP to try and query the Address Tables on the switches and routers.
It should be noted that to use WoL across routers you either need to enable Directed Broadcasts or you need to have a relay server in the local segment.
Been a while since I played routers and swtiches but this might be a starting point for what to query using SNMP http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c9199.shtml
Use the following:
getmac /s destIp
To get the remote session Mac address.
I don't know if these might be helpful but take a look:
http://www.webdeveloper.com/forum/showthread.php?t=134120
http://www.qualitycodes.com/tutorial.php?articleid=19
You've said everything I can think of...
The source MAC address changes as a packet hops from device to device so unless the client is on the same subnet, the server won't be able to get the MAC address. (You would do it via ARP)
A signed java applet or activex control would be the easiest solution. It would be able to (almost passively) get all the networking info you need (IE doesn't even prompt to run a signed applet)
If you are fully aware of the network that is using the service then you could probably query a gateway's client-list via SNMP or CDP. You would be able to map out IP-Addresses to MAC addresses... but this is really vendor dependent (but common) and wouldn't be much better (imo) than having an applet.
Currently the application is using a Java 6 applet that allows me to extract both the hostname and the MAC address from the remote system. I don't like having this dependency on Java 6, but Snow Leopard and Windows both support it, so I can probably live with it.
On a related-front our networking folks approached me for some help with converting some existing code to ASP.NET. During the conversation I asked if they had live MAC address information (since they do port shutoffs based on suspicious network activity -- viruses/worms). Turns out they do and we may be able to leverage this project to get access to the information from the network database.
I don't think there is any way to accomplish this. When the IP packet goes via the first router the host's MAC information is lost (as you know MAC is only used in ethernet layer). If the router most close to your PC was capable of telling the remote MAC code to you, again it would only see the MAC of the next router between your PC and the "other end".
Start sacrificing.
There's no general way to do this in terms of the network unless you have no routers involved. With a router involved, you will never see the MAC address of the originating system.
This assumes that the originating system only ever has a single network interface, so has only a single MAC address.
In fact, are you even sure that your "magic packet" (whatever that is) will reach the system you want it to reach, through the routers? That sounds like a function the routers or other network infrastructure should be performing.
Mac address is only used on network segments, and is lost at each hop. Only IP is preserved for end-to-end - and even then the from ip address is rewritten when Natted. I guess my answer is, not possible unless everything is on the same network segment, or your routers are set up for proxy arp (which is not really realistic).
You can only get MAC entries in the ARP table for machines on the same network. If you connect to a machine via a router then you will only see the routers MAC address in the ARP table. So there is no way of knowing the foreign host’s MAC address unless it's a host on the same network (no routers involved).
And by the way there are many similar question already on SO.
if it's a windows system you can use NBTSTAT -A
this will return the netbios info and the IP is there
any Management system like SMS or Altiris will have this info
The DHCP server is a good idea
If it's local you can ping it and then quickly run ARP -a
look for the IP and the MAC will be there.
you might need to write a small batch file.
if you have access to the PC you can use WMI to access the info for the Nic with DHCP.
As said above we can get mac address from a known IP address if that host is in the same subnet. First ping that ip; then look at arp -a | grep and parse the string on nix* to get mac address.
We can issue system command from all programming languages standard API's and can parse the output to get mac address.Java api can ping an IP but I am not sure if we parse the ping output(some library can do it).
It would be better to avoid issuing system command and find an alternative solution as it is not really Platform Independent way of doing it.
Courtesy: Professor Saleem Bhatti