I can't preview my Google Optimize experience. Google optimize throws below error:
This happens to me quite often too. The suggestion Google gives is wrong. Clearing cookies and restarting the browser does not fix it. Sometimes rebooting does, but that's a huge disruption.
What I found to work pretty reliably is to end the preview (dropdown), then click the EDIT button to go to the editor. Come back to the setup page, then try Debug again. Debugger should work again.
This is how it worked for me:
In Chrome go to Clear Browsing Data (chrome://settings/clearBrowserData).
Make sure you select checkboxes Cookies and Cached images and files.
Submit the form by hitting the button "Clear data".
Go to preview experience.
For me it started working when I gave the Google Optimize plugin access to all pages (not just the page running the experience).
I think I've found a fix for this. Go to the top right corner of chrome (the three dots) Settings > Privacy & Security > Cookies & other data > and add the url in the bottom section called "sites that can always use cookies"
Example
There can be multiple reasons.
Most obvious: enabled cookies like mentioned by others. should help
If it does not work even when cookies are enabled and you have restarted the browser then more chances are that the issue is in the Experience/Test that you are trying to preview. This can be due to:
A preview is already running in another tab. Turn off preview
2.You have set the experience to run on certain URL patterns and you are trying to preview on a page that does not qualify the criteria.
You have set some Audience rules which are not being met fully. For example: You have set the Audience Device type to mobile and you are trying to preview on a Desktop. Although Optimize will load the preview in a mobile mode but it will not be able to run the experience properly.
In my case the issue was due to wrong device type. I hope it helps.
It's also possible to get this "Unable to preview experience. Please make sure to enable cookies and restart the browser" error message if the content you're trying to modify doesn't exist when Optimize tries to modify it.
I had Optimize set to modify on page load, but the page I was working with was a form, where the text I wanted to modify didn't exist until I clicked through to the second step of the form (still on the same URL).
I was able to just run the study instead on another similar page that had all the text loaded at the start. I'd guess that setting Optimize to trigger from a custom event triggered upon loading the second step of the form instead of "on page load" would also have resolved the issue.
If you are using chrome then:
Click the context menu in the browser toolbar to the right of the
address bar.
Choose Settings.
Select/Search the "Security and Privacy" section.
Choose "Cookies and Other Site Data" Ensure that "Allow all cookies" is selected.
Here's my current workflow for editing CSS:
Me: "Take a look at this page!"
Guys: "Try making the post titles bigger"
Right click on a post title, choose "inspect" (to inspect it in firebug)
Find the appropriate CSS statement in Firebug (h2.post_title or something)
Modify the CSS in Firebug, ask friends how it looks
If it looks good, make the change again in Textmate
I want to avoid step 6. I.e., I want the ability to edit CSS via a Firebug-like UI and be able to commit my changes to the relevant file immediately (rather than having to copy them by hand as I do with Firebug)
Edit: Something that works on a Mac would be ideal
Have you tried "Web Developer" extension in Firefox? It allows you to open, edit and save CSS files.
http://www.skybound.ca/
Go forth and be enlightened. This is truly a life changing program.
Another possible workflow:
"Hey guys, take a look at this page!"
"Try making the post titles bigger"
Make the change to the CSS file
Hit reload
I only use Firebug for debugging (eg: "why is this thing getting that style?") not for making changes when I know where they need to go in the CSS. This workflow does depend somewhat on being able to reload the CSS easily. If you're working on an app where hitting reload completely disrupts your state it might not be ideal.
Check out Backfire:
http://blog.quplo.com/2010/08/backfire-save-css-changes-made-in-firebug/
Haven't tried it, but sounds promising.
Check out my contribution to this problem:
http://www.cssupdater.com
Step 6 would then be:
6: One click on the "Sync now" button in Firebug!!
The click sends your changes to the desktop application, which syncs your orignal css files.
You can also choose the changes you want to sync in the application. It works with your favorite text editor or IDE and on both Windows and Mac!
Heureka?
XRefresh with "Soft Refresh" enabled may help your workflow, but you still need to know what CSS selectors do you want to add/edit.
What's why I'm developing LIVEditor, because I don't want to manually redo the change again in the text editor after tweaking my css styles in Firebug (or the likes).
Backfire (see post below) was created specifically for Quplo (http://quplo.com), which is a tool that specificly does what you describe. You write html and css, then talk about what needs to be changed, make the changes (using firebug or web developer toolbar) and hit save.
I have no one else to count unless this fantastic community, I know this is a non-programmer question but I can't figure it out why this is happening.
To a client I developed, using 960.GS a layout with a simple login user page / choose product / register products using .NET (ASP.NET 3.5) and all was ok, they agreed and I started ...
I then imported the HTML files I did and started to replace input with asp:TextBox's and the button into an asp:Button, really simple/basic stuff, but soon I click "View in Browser" I got my code all scrambled!
even if I see a XHTML 1.1 Strict Validated code, and CSS 2.1 Validate code
to try to get what's wrong, I put the ASPX file aside and open only the HTML page.
results are very different:
Opening directly in Firefox, with no web server:
alt text http://www.balexandre.com/temp/2009-11-22_1116.png
if I run the same page (exactly the same code) [HTML page, no ASP.NET page] through Cassini (Visual Studio Web Server) it shows .. ohh well...
alt text http://www.balexandre.com/temp/2009-11-22_1117.png
as well if I run that html page from IIS 7.5
alt text http://www.balexandre.com/temp/2009-11-22_1129.png
all 3 files above are the same page, being run through 2 different servers Cassini, IIS and the normal HTML render from Firefox.
using Firebug, all css loads well
screen cast: http://bit.ly/7ZBkuh (20 sec)
Does anyone have any idea for this behavior?
All help will be greatly appreciated, Thank you.
This looks like a css overflow problem. Are there any differences between the resultant markup/css from the browser (not the source file in the url bar) - eg, by comparing the "View page source" result? I suspect there will be. And i suspect that it's css related not markup.
It might help to run a diffing tool against your original HTML file and the output produced by your ASPX page. It will definitely be expected to see some differences, but it might still help you highlight what's going wrong.
This is only a guess, but perhaps the CSS styles that you are seeing in the ASP.NET-hosted pages are defined in the page, and the CSS styles that you are not seeing are defined in a separate CSS file?
If that is indeed the case, then the problem could be due to the way you have configured ASP.NET authentication in web.config. It may be serving up the HTML file but blocking the CSS file.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
Firebug is the most convenient tool I've found for editing CSS - so why isn't there a simple "save" option for CSS?
I am always finding myself making tweaks in Firebug, then going back to my original .css file and replicating the tweaks.
Has anyone come up with a better solution?
EDIT: I'm aware the code is stored on a server (in most cases not my own), but I use it when building my own websites.
Firebug's just using the .css file Firefox downloaded from the server, it knows precisely what lines in which files it's editing. I can't see why there's not an "export" or "save" option, which allows you to store the new .css file. (Which I could then replace the remote one with).
I have tried looking in temporary locations, and choosing File > Save... and experimenting with the output options on Firefox, but I still haven't found a way.
EDIT 2:
The official discussion group has a lot of questions, but no answers.
Been wondering the same for quite some time now,
just gut-wrenching when your in-the-moment-freestyle-css'ing with firebug gets blown to bits by
an accidental reload or whatnot....
For my intents and purposes, I've finally found the tool.... : FireDiff.
It gives you a new tab, probably some weird David Bowie reference, called "changes";
which not only allows you to see/save what firebug, i. e. you, have been doing,
but also optionally track changes made by the page itself....if it and/or you are so inclined.
So thankful not having to re-type, or re-imagine and then re-re-type, every css rule I make...
Here is a link to the developer (don't be disparaged by first appearance, mayhap just as well head straight over to the Mozilla Add-On repository .
I got here looking exactly for this feature, that is, being able to save edited CSS properties back to the original file (on my local development machine). Unfortunately after searching a lot and not finding anything that suits my needs (OK, there's CSS Updater but you have to register and it's a paid extension...) I gave up on Firefox + Firebug and looked for something similar for Google Chrome. Guess what... I just found this great post that shows a nice way of getting this to work ( built into Chrome - there's no need for additional extensions ):
Change CSS and SAVE on local file system using Chrome Developer Tools
I tried it now and it works great highlighting the changed lines. Just click Save and you're done! :)
Here's a video explaining this and much more: Google I/O 2011: Chrome Dev Tools Reloaded
I hope it helps if it doesn't matter to you changing browser while editing your CSS files. I made the change already for now, but I would really love to have this functionality built into Firebug. :)
[Update 1]
Today I just saw this video: Firefox CSS live edit in Sublimetext (work in progress) Looks promising indeed.
[Update 2]
If you happen to be using Visual Studio 2013 with Web Essentials you'll be able to sync CSS automagically as shown in this video:
Web Essentials: Browser tools integration
The Web Developer add-on let's you save your edits. I'd like to combine the editing of Firebug with the Save feature of Web Developer.
(source: mozilla.org)
Use the "Save" button (click CSS menu -> Edit CSS) to save the modified CSS to disk.
Recomendation: Use the "Stick" button to prevent losing your changes when you change the tab for doing other browsing. If it is possible, use only one tab to do the edit and other firefox window the related searches, webmail, etc.
I just released a firebug addon at the mozilla addon sandbox which might quite do what you want:
https://addons.mozilla.org/en/firefox/addon/52365/
It actually saves the "touched" css files on demand to your web server (by communication with a one-file webservice php script).
Documentation can be found at my homepage or on the addon page
I would appreciate any testing, bug reports, comments, ratings, discussion on this, as it's still in early beta, but should already work fine.
CSS-X-Fire
I'm surprised that it still not listed to this question, but probably because is new and the author didn't have time to promote it yet.
It is called CSS-X-Fire and it is a plugin for JetBrains series of IDEs : IntelliJ IDEA, PHPWebStorm, PyCharm, WebStorm, RubyMine.
How it works:
You install one of these IDEs and configure the deployment (supports FTP and SCP). This will allow you to stay in sync with the server.
After this you install this plugin. When it starts it will ask tell you that he will install a plugin for Firefox, in order to do the integration between Firebug and the IDE. If it fails to install the plugin, just use the drag-n-drop technique to install it.
Once installed it will track all your changes from Firebug and you will be able to apply them with a simple click inside de IDE.
FireFile
FireFile is an alternative that requires you to add one small php file to the server side in order to be able to upload the modified css.
You could link firebug to eclipse with fireclipse and then save the file from eclipse
I think the closest you're going to get is by going into Edit mode in Firebug and copying and pasting the contents of the CSS file.
We just introduced Backfire, an open source javascript engine that allows you to save CSS changes made in Firebug and Webkit inspector to the server. The library includes an example C# implementation of how to save the incoming changes to your CSS.
Here's a blog post about how it works:
http://blog.quplo.com/2010/08/backfire-save-css-changes-made-in-firebug/
And here's the code hosted at Google Code:
http://code.google.com/p/backfire/
I know this doesn't answer your question, but surprisingly, Internet Explorer 8's Firebug clone "developer toolbar" (accessible via F12) offers the option to "save html". This function saves the current DOM to a local file, which means that if you edit the DOM somehow, e.g. by adding a style attribute somewhere, this will be saved too.
Not particularly useful if you're using Firebug to mess around with CSS like everyone does, but a step in the right direction.
I propose a solution that involves a combination of Firebug and FireFTP as well as code that directly accesses the local file system when running a website locally.
Here are the scenarios:
Working on a website that is hosted on a remote machine
In this case you would provide the FTP details and the location of the CSS/HTML/Javascript and Firebug would then update these files when you save your changes. It may even be able to locate the files itself and then prompt you to verify that it has the correct file. If file names are unique it shouldn't be a problem.
Working on a website running on your local machine
In this case you could provide Firebug with the local folder location of the website and the same behaviour would be used to match and verify the files. The access to the local file system could be performed through FireFTP if necessary.
Working on a website hosted remotely without FTP access
In this case something like the FireFile add-on would have to be implemented.
An additional feature would be the ability to save and open project files that store the mappings between the local files and the URLs they are associated with as well as saving the FTP details as FireFTP already does.
I am the author of CSS-X-Fire which Sorin Sbarnea also kindly posted about in this thread. Guess I'm a bit late ;)
CSS-X-Fire emits CSS property changes from Firebug to the IDE where the changes can be applied or discarded.
There are a couple of advantages with this solution over most of the other existing tools which only know know about the filenames and the content downloaded by the browser (see NickFitz comment in the original post).
Scenario 1: You have a website (project) which has a handful of themes from which the user can select from. Each theme has its own CSS file but only one is known to Firebug, the current one. CSS-X-Fire will detect all matching selectors in the project and let you decide which should be modified.
Scenario 2: The web project has stylesheets created compile-time or during deployment. They might be merged from several files and the file names may change. CSS-X-Fire doesn't care of the names of the files, it only deals with CSS selector names and their properties.
Above are examples of scenarios where CSS-X-Fire excels. Since it works with the source files, and knows about the language structure, it also helps to find duplicates not known to Firebug, jump-to-code, etcetera.
CSS-X-Fire is open source under the Apache 2 license.
Project home: http://code.google.com/p/css-x-fire/
FireFile
Firebug was created to detect a problem not to be a debugger. but you can save change if you add new tool that integrate firebug with save changes. it is FireFile, click here
http://thelistoflist.blogspot.com/2010/04/how-to-save-change-you-make-in-firebug.html.
FireFile provide the desired functionality by adding a small PHP file to the server side.
Since Firebug is not working on your server but taking the CSS from the site and storing it locally and showing you the site with those local changes.
Use the CSS editor in the Firefox Web Developer toolbar:
http://chrispederick.com/work/web-developer/
It's got enough good stuff to use in conjunction with Firebug, and it lets you save your CSS out to a text file.
Use Backfire.
http://blog.quplo.com/2010/08/backfire-save-css-changes-made-in-firebug/
It's an open source solution that sends CSS changes back to the server and saves them.
Backfire uses a single javascript file, and the sourcecode package has a working .NET server implementation example that is easily portable to other platforms.
I had this problem forever as well, and finally decided that we shouldn't be editing things in the web inspector and built something for it (https://github.com/viatropos/design.io).
A better solution:
The browser automatically reflects CSS changes without reloading when you press save in your text editor.
The main reason we're editing css in the web inspector (I use webkit, but FireBug is along the same lines) is because we need to make small adjustments, and it takes too long to reload the page.
There are 2 main problems with this approach. First, you're allowed to edit an individual element that may not have an id selector. So even if you were able to copy/paste the generated CSS from the web inspector, it would have to generate an id to scope the css. Something like:
#element-127 {
background: red;
}
That would start making your css a mess.
You could get around that by only changing styles for an existing selector (the .space class selector in the webkit inspector image below).
Still though, the second problem. The interface to that thing is pretty rough, it's hard to make big changes - like if you want to try real quick copying this block of css to this place, or whatever.
I'd rather just stick to TextMate.
The ideal would be to just write the CSS in your text editor and have the browser reflect the changes without reloading the page. This way you'd be writing your final css as you're making the little changes.
The next level would be to write in a dynamic CSS language, like Stylus, Less, SCSS, etc, and have that update the browser with the generated CSS. This way you could start creating mixins like box-shadow(), that abstracted away the complexities, which the web inspector definitely couldn't do.
There's a few things out there that kind of do this, but nothing really streamlining it in my opinion.
LiveReload: pushes css to browser without refreshing when you press save, but it's a mac app, so it'd be difficult to customize.
CodeKit: also a mac app, but it refreshes the browser every time you save.
Not having the ability to easily customize the way these work is the main reason I didn't use them.
I put together https://github.com/viatropos/design.io specifically to solve this problem, and make it so:
The browser reflects the css/js/html/etc anytime you save, without reloading the page
It can handle any template/language/framework (Stylus, Less, CoffeeScript, Jade, Haml, etc.)
It's written in JavaScript, and you can whip together extensions real quick in JavaScript.
This way, when you need to make those little changes to CSS, you can say, set background color, press save, see nope, not quite, adjust the hue by 10, save, nope, adjust by 5, save, looks good.
The way it works is by watching whenever you save a file (at the os level), processing the file (this is where the extensions work), and pushing the data to the browser through websockets, which are then handled (the client side of the extension).
Not to plug or anything, but I struggled with this issue for a long ass time.
Hope that helps.
Firebug works on the computed CSS (the one which you get by taking the CSS in the files and applying inheritance, etc. plus the changes made with JavaScript). This means that probably you couldn't use it directly to include in an HTML file, which is browser/version specific (unless you care only about Firefox). On the other hand, it keeps track of what is original and what is computed... I think it should not be very difficult to add some JS to Firebug to be able to export that CSS to a text file.
I was wondering why can't I bloody well select and copy the text in front of my eyes. Especially when others say you can just "select and copy". Turns out you can, you just have to start the drag outside of any text (i.e. in the gutter above or to the left of the text) as any mousedown -- whether it's a click or drag -- on any text immediately invokes the property editor. You can also click outside text to get a cursor (even if it's not always visible) which you can then move around with the arrow keys and select text that way.
The text copied to the clipboard is devoid of any indenting, unfortunately, but at least it saves you from manually transcribing the entire contents of the CSS file. Just have your diff programme ignore changes in whitespace when comparing against the original.
You could write your own server script file that takes a filename parameter and a content parameter.
The server script would find the requested file and replace its contents with the new one.
Writing the Javascript that taps into firebug's info and retrieves the useful data would be the tricky part.
I'd personally rather ask the dev team at firebug to supply a function, it shouldn't be too hard for them.
Finally, Ajax sends the filename/content pair to the php file you created.
Quoted from the Firebug FAQ:
Editing Pages
Can I save to the source the changes I made to the webpage I'm seeing?
Right now you can't. As John J. Barton wrote on the newsgroup:
Editing in Firebug is kinda like taking out the pickles from and adding mustard to a restaurant sandwich: you can enjoy the result, but the next customer at the restaurant will still get pickles and no mustard.
This is a long-requested functionality, so someday it'll be available directly from Firebug. Meanwhile, you can try Firediff, an extension for firebug by Kevin Decker.
How can I output all changes that have been made to a site's CSS within firebug?
That's a feature implemented in Kevin Decker's Firediff.
Here's a partial solution. After you make your changes, click on one of the links to the relevant file. This is the original file, so you'll have to refresh the file, which is under the options menu button in the upper right of the firebug pane. Now you have the modified css page, which you can copy & paste. Obviously, you'll have to do it for each css file.
Edit: looks like Mark Biek has a quicker version
A very easy way to "edit" your page is to go onto the site via your internet browser. Save the page as html only onto your desktop. Go to your desktop and right click on the new web page file and select open with, choose notepad and edit the page from there, if you know html it will be easy. After all your editing is done, save the file and reopen your webpage, the changes should be there if done correctly. You can then use your new edited page and export or copy it to your remote location
Actually Firebug is a debug and analyze-Tool: not an editor and obviously not considered to be one. The other reason was already mentioned: how to you want to change CSS, stored on a server when debugging a webpage?