I have 3 jars: jar1, jar2 and jar3, in the same path who can change in other pc (ex: c:\prova)
When I run jar1, it moves jar2 in the Windows Sturtup folder.
I want that jar2 simply activate jar3 at every windows startup, but of course it doesn't find jar3 who is remained in the first path.
So I want that jar1 pass a reference (in this case the path c:\prova) to the jar2, when moving it, or at least on the first call to it.
I find it difficoult because:
I can't write the path in a text file in jar2: text files in jars aren't writable.
I can't write the text file in the windows Startup folder: it will be opened at every win startup..
I can't pass the path as a parameter, it will be good for the first call but I can't store this value for the succesive calls.
Sorry for my bad english, thanks for any help!
To add the file Path.txt (with jar3's path) in jar2:
Runtime.getRuntime().exec("jar uf jar2.jar Path.txt");
To read the file in jar2 (Startup is my class name):
String s = "/Path.txt";
is = Startup.class.getResourceAsStream(s);
br = new BufferedReader(new InputStreamReader(is));
while (null != (line = br.readLine())) {
list.add(line);
}
Thank me!
Related
I tried PGP encrypting a file in ChoPGP library. At the end of the process it shows embedded file name along with the whole original file name path.
But I thought it will show only the filename without the whole path. Which I intend to work on and figure out a way to do so?
Doing the following:
using (ChoPGPEncryptDecrypt pgp = new ChoPGPEncryptDecrypt())
{
pgp.EncryptFile(#"\\appdevtest\c$\appstest\Transporter\test\Test.txt",
#"\\appdevtest\c$\appstest\Transporter\test\OSCTestFile_ChoPGP.gpg",
#"\\appdevtest\c$\appstest\Transporter\pgpKey\PublicKey\atorres\atorres_publicKey.asc",
true,
true);
}
which will result in:
But I would like to only extract the Test.txt in the end something
like this:
Looking at this line from the ChoPGP sources: https://github.com/Cinchoo/ChoPGP/blob/7152c7385022823013324408e84cb7e25d33c3e7/ChoPGP/ChoPGPEncryptDecrypt.cs#L221
You may find out that it uses internal function GetFileName, which ends up with this for the FileStream: return ((FileStream)stream).Name;.
And this one, according to documentation, Gets the absolute path of the file opened in the FileStream..
So you should either make fork of ChoPGP and modify this line to extract just filename, or submit a pull request to the ChoPGP. Btw, it's just a wrapper around the BouncyCastle so you may use that instead.
I have overridden the onProject function for the vs2012 action which generates some cpp files and then tries to include them in the project
--cant override the generateProject directly
--so have to override at the action level
premake.override( premake.action._list.vs2012, 'onProject', function(base, prj)
if premake.project.iscpp(prj) then
--generate files
--print( "Generating extra files ...")
local extraFiles = mine.getExtraFiles(prj)
for _,file in ipairs( extraFiles ) do
p.generate( file, nil, mine.generateExtraFile )
mine.addFileToSources(file)
end
end
--Generate regular stuff
base(prj)
end)
function mine.getExtraFiles(prj)
local extraFiles = {}
--works out what files to generate and add relevant info to table
return extraFiles
end
--this function is passed as a callback to premake.generate
function mine.generateExtraFile(extraFile)
--write contents of file
end
This is the function that attempts to add each generated file to the project
function mine.addFileToSources(extraFile)
local prj = extraFile.prj
local cfg = extraFile.cfg
local groups = premake.vstudio.vc2010.categorizeSources(prj)
local compiledFiles = groups.ClCompile or {}
--create a new file config for generated file
local filename = path.join(extraFile.location, extraFile.filename)
local fcfg = premake.fileconfig.new( filename, prj)
premake.fileconfig.addconfig(fcfg, cfg)
--add the config to the project's sources
table.insert(compiledFiles, fcfg)
compiledFiles[filename] = fcfg
--add to the projects source tree
--this bit is copied from premake.project.getsourcetree
-- The tree represents the logical source code tree to be displayed
-- in the IDE, not the physical organization of the file system. So
-- virtual paths are used when adding nodes.
-- If the project script specifies a virtual path for a file, disable
-- the logic that could trim out empty root nodes from that path. If
-- the script writer wants an empty root node they should get it.
local flags
if fcfg.vpath ~= fcfg.relpath then
flags = { trim = false }
end
-- Virtual paths can overlap, potentially putting files with the same
-- name in the same folder, even though they have different paths on
-- the underlying filesystem. The tree.add() call won't overwrite
-- existing nodes, so provide the extra logic here. Start by getting
-- the parent folder node, creating it if necessary.
local tr = premake.project.getsourcetree(prj)
local parent = premake.tree.add(tr, path.getdirectory(fcfg.vpath), flags)
local node = premake.tree.insert(parent, premake.tree.new(path.getname(fcfg.vpath)))
-- Pass through value fetches to the file configuration
setmetatable(node, { __index = fcfg })
end
For the most part - this all works:
The files are generated correctly and to correct location
The files are also included in the vcxproj file correctly
My problem is that the vcxproj.filters file is not being generated.
When I run premake I get this error:
Generating myproject.vcxproj.filters...Error: [string "src/actions/vstudio/vs2010_vcxproj_filters...."]:82: attempt to index field 'parent' (a nil value)
which corresponds to the function premake.vstudio.vc2010.filterGroup(prj, groups, group)
I get that the new fcfg I created needs to have a parent but I can't work out where or what I should be adding it to.
Can anyone help?
EDIT 1
I've got things working by adding this line to the end of function mine.addFileToSources(extraFile)
fcfg.parent = parent
This gives the file config a parent node so everything works out but I feel kinda dirty doing this so I'll look at following Citron's advice
EDIT 2
Overriding the bakefiles was much cleaner and neater. It wasn't as straightforward as Citron's code since I needed the information from the baked files in order to carry out my file generation but I am now confident that my code is correct and will possibly work with other exporters than vstudio too.
Here's my new code:
premake.override( premake.oven, 'bakeFiles', function(base, prj)
--bake the files as normal
local bakedFiles = base(prj)
if premake.project.iscpp(prj) then
--gather information about what files to generate and how
local extraFiles = mine.getExtraFiles(prj, bakedFiles)
for _,file in ipairs( extraFiles ) do
--do the generation
premake.generate( file, file.extension, mine.generateExtraFile )
--add the new files
local filename = premake.filename(file, file.extension)
table.insert(file.cfg.files, filename)
-- This should be the first time I've seen this file, start a new
-- file configuration for it. Track both by key for quick lookups
-- and indexed for ordered iteration.
assert( bakedFiles[filename] == nil )
local fcfg = premake.fileconfig.new(filename, file.prj)
bakedFiles[filename] = fcfg
table.insert(bakedFiles, fcfg)
premake.fileconfig.addconfig( bakedFiles[filename], file.cfg)
end
--sort the baked files again - since we have added to them
table.sort(bakedFiles, function(a,b)
return a.vpath < b.vpath
end)
end
return bakedFiles
end)
I don't know what the problem is with your code (a bit too much to read, and not enough time :p) but if you just want to add some generated files to your project tree, I would advise you to override premake.oven.bakeFiles instead.
This is what I used to add files generated by Qt in my addon. See premake.extensions.qt.customBakeFiles on https://github.com/dcourtois/premake-qt/blob/master/qt.lua
Basically in the bakeFiles override, you can just browse your projects, and insert files in the list easily. Then, if those added files need some custom configuration, you can then override premake.fileconfig.addconfig. See premake.extensions.qt.customAddFileConfig in the aforementioned addon.
In this addconfig override, you'll have access to the files and you will be able to modify their configuration object: you can add custom build rules, special options, etc.
It's not a direct answer to your specific question, but I hope it will help you achieve what you need.
I would like to determine real file extension.
example :
file = "test.fakeExt"
// but the real extention is .exe // for security reason I wish to avoid using it!
How can I do that?
If you want to determine the extension you could use findmimefromdata.
It looks at the first part of the file to determine what type of file it is.
FindMimeFromData function
Sample code
The first two bytes of an .exe file are allways 'MZ'.
So you could read the binary file, and see if the first two bytes are MZ, then you know it's an .exe file...
I have DotNetZip installed and running fine on a Windows 2008 server.
Using a classic ASP page, I want to bundle a bunch of comma-delimited files to a user and send it over in a zip file.
The following code works fine but it stores all the path information so the files inside the zip file are located in some ridiculous directory like C:\Inetpub\wwwroot\appname\_temp\
I'm using the following code:
Set objZip = CreateObject("Ionic.Zip.ZipFile")
sFileArray = Split(sFileArray, "|")
For iCount = 0 To UBound(sFileArray)
If sFileArray(iCount) <> "" Then
objZip.AddFile sFileArray(iCount)
End If
Next
objZip.Name = sFilePath & "test.zip"
objZip.Save()
objZip.Dispose()
Set objZip = Nothing
I see that the AddFile method allows you to specify where you want the added file to reside in the zip file if you add a second parameter. According to the documentation objZip.AddFile sFileArray(iCount), "" should put the file in the root of the zip file.
However, when I add that parameter, I get the following error:
Wrong number of arguments or invalid property assignment: 'objZip.AddFile'
Anyone have any idea what I'm doing wrong?
Thanks.
I think you are misinterperting the documentation. If the second parameter is null then the directory path of the file being added is used. If the second parameter is an empty string "" then the file is added to the root level in the zip. A quick look into the Ioniz.zip.dll shows that the single parameter override of AddFile method simply calls the the double parameter override with the second parameter set to null.
Hence your add file should look like:
objZip.AddFile sFileArray(iCount), ""
to get the result you are after.
Considering :
ALLdwafDif[#] & /# symmetries
Save["ALLL.m", ALLL]
Is there a way to save the results in a particular directory ? It automatically save the results in my user directory now.
The current working directory is given by Directory[]. You can set it by SetDirectory[]. Alternatively, you can append the directory name to ALLL.m and it works.
eg
f = 5;
Save["~/Desktop/temp.m", f]
does what you'd expect (~ is a shortcut for home directory on most Unices, and mma respects it, so this gets saved on my desktop)
If you want to change the default working directory permanently you can add something like SetDirectory["new_dir"]; to one of the files $BaseDirectory/Kernel/init.m or $UserBaseDirectory/Kernel/init.m (which one depends on whether you want to change the default directory for all users or for the current user only). Next time you restart Mathematica, Directory[] will then automatically be set to new_dir.
Save[SystemDialogInput["FileSave", "All.m"], ALLL]
brings up a standard system save-file dialog box and saves your file after you've chosen a location (and a new file name if you have chosen one).
I find it useful to save data in the same location as the notebook:
f = 5;
Save[FileNameJoin[{NotebookDirectory[], "f.dat"}], f]
Or to save in your (default) Dropbox directory:
Save[FileNameJoin[{$HomeDirectory, "Dropbox", "f.dat"}], f]
I rarely use the directory stack that's controlled by SetDirectory[] and friends.