I am trying to do some development to the LogisticsPostalAddress form that is used on forms where an address is modified/added. When trying to add an address (e.g. to an existing Customer) I get the error.
You are not authorized to access table ‘Shipping carrier’ (ShipCarrierAddress). Contact your system administrator.
I have scoured the user permissions and cannot find a way to give permission to this table. I would think that adding an address is a basic function, so can not figure out why I can't.
Thanks,
Kevin
What role is your user assign to? Are you sure users in that role should be able to add addresses to the customer? If yes, here is how you can add permissions to the ShipCarrierAddress table:
With admin user, open development envionrment (Ctrl + Shift + W from
running Ax, or run "ax32.exe -development" from command prompt)
In the AOT, go to Security > Roles. Find the role your user is assigned to.
Exapand the Role > Permissions > Table, add new table and set table name to ShipCarrierAddress and EffectiveAccess (in your case
you want to insert, thus set to Create)
Save the role, and compile the role (not sure if compile is mandatory)
Start a new Ax instance with the user with limited permissions and verify you have access.
I turned out it was an issue with the installation of the lab.
Related
Hello to forum from a part time occasional user of MS Access 2010:
Trying to get permission to allow a third party application read MsysObjects which in turn will allow it to save a copy of the table relationship window in a form that will allow the layout to be recovered when it crashes (frequently - and is a known irritation/bug).
Have tried the method suggested in quote from this forum [HansUp] without success - including substiting this DAO line for the last ADO line following advice on a different forum:
dbEngine(0)(0).Execute strDdl, dbFailOnError
Since your db is ACCDB format, you will be working as user Admin. You can confirm that point in the Immediate window. (Go there with Ctrl+g)
? CurrentUser()
Admin
Since Admin doesn't have read (SELECT) permission on MSysObjects, execute a DDL statement to give Admin that permission.
strDdl = "GRANT SELECT ON MSysObjects TO Admin;"
CurrentProject.Connection.Execute strDdl
Advice from yet another forum to import or export to fresh blank accdb gives no result as permissions are still not available.
All this is beyond my pay grade so any advice welcome.
I have "You do not have sufficient permissions to access this page." issue when trying to access Wordpress wp-admin login as an administrator. The login page appears, but when the user details are entered the "You do not have sufficient permissions to access this page." appears.
The strange part is that I have another administrator account that accesses with no error.
I tried to create a new administrator account, but that also cannot access giving the above error message.
I have looked into the database and the users that don't work have wp_capabilities of a:1:{s:13:"administrator";b:1;}
The user that does work has: a:2:{s:13:"administrator";b:1;s:13:"bbp_keymaster";b:1;}
I am also running S2 Member plugin.
The only difference I can see between the account is this beginning section of a:1 and a:2. All of the sites I see say the account should be a:1
I don't think it is a plugin issue, as I assume then I would not be able to access either. I think perhaps something to do with s" Member plugin, but I'm now at a bi of a loss.
All plugins are updated and running Wordpress 4.0 (however this was an issue even before upgrade to 4.0)
All help gratefully received!
The only difference I can see between the account is this beginning section of a:1 and a:2.
Look more carefully. The working example has a whole extra section: s:13:"bbp_keymaster";b:1;
To understand why that matters, it helps to know that that is the format produced by by PHP's serialize() function.
If you unserialize each of those strings, you will find that the first is an array with 1 entry (hence a:1), with the key 'administrator' and a value of true. The longer string is an array with that entry plus another one, with the key 'bbp_keymaster', also set to true.
From this, it's easy to surmise that 'administrator' and 'bbp_keymaster' are the internal names for permissions which can be granted to a user, and the page in question is only available to users with the 'bbp_keymaster' permission.
I've done a mysqldump from our Drupal6/CiviCRM4 Civi DB and am trying to import it into a Drupal7/Civi4 dev install, but keep getting "ERROR 1227 (42000) at line 369: Access denied; you need the SUPER privilege for this operation"
From what I can tell, user has correct permissions as indicated via site's cpanel, all appears correct in the import command. I've not come upon this error before doing similar proceedures on other installs. Help please?
It could be one of a couple of things.
First, if you have MySQL version before 5.1.6, you'll need the SUPER permission no matter what:
http://wiki.civicrm.org/confluence/display/CRMDOC/CiviCRM+MySQL+Permission+Requirements
However, since it has been running fine and you're just trying to import the dump file, I think it's probably that your dump file has functions where the definer is set as the database user for the old site (let's say "foo#localhost"). You aren't allowed to set the definer as someone other than yourself without the SUPER privilege. If the new site has a different user (maybe "bar#localhost"), you're acting as "bar#localost" trying to set a function defined by "foo#localhost".
In your dump, you'll probably see something along the lines of
CREATE DEFINER=`foo`#`localhost` FUNCTION ...
You can do one of two things:
have both databases use the same database user account, or
edit the dump file to replace the old user name with the new user name everywhere it occurs.
You should also be aware that "foo#localhost" and "foo#%" are separate users, even if they have the same name and password.
A Drupal/CiviCrm database uses triggers. The SUPER privilege is needed to recreate the trigger when you import the database. If you've restricted your standard user's privileges to those needed while running Civi, you can create a new MySQL user just for the import and grant that user ALL privileges on the database(s). After the import is complete, remove the user with elevated privileges.
I have 2 databases in one server, a Web App db containing XPages only, and another database containing documents. When I tried to open a document in Xpage, an error appears saying that I don't have access to the document (I did a checking using db.queryAccess(myUserName) and found out that I don't have access to the document database, even though my user name is specified directly as Manager). I created a new copy of the document database, then points my web app db to that. Here I have access to the documents! I had implemented this before and this is the first time I had this problem. What are the probable problem(s) with my original document database? I already did a fixup and compacting, but to no avail. Please help me... Thanks!
Please check the the "Maximum Internet name and password" option in the ACL settings. This option overrides every ACL entry: If you are Manager but the option is set to "No Access" - you have no access.
All the time when I'm trying login myself to sqlplus I log on to SQL> but I don`t know what I have to do to got Main user account for example [oracle#host01~] ?
The SQL> prompt is the default in SQLPlus. You can change it on the commnadline, once logged in, to a custom string. try:
set sqlprompt "_USER'#'_CONNECT_IDENTIFIER > "
to show your user and the DB you are connected to.
from this page, we can see the following default keywords that you can use:
_CONNECT_IDENTIFIER Connection identifier used to make connection, where available.
_DATE Current date, or a user defined fixed string.
_EDITOR Specifies the editor used by the EDIT command.
_O_RELEASE Full release number of the installed Oracle Database.
_O_VERSION Current version of the installed Oracle Database.
_PRIVILEGE Privilege level of the current connection.
_SQLPLUS_RELEASE Full release number of installed SQL*Plus component.
_USER User name used to make connection.