Is it possible to make copied of plone/zope folder on the file system and still be able to run the site?
At the moment when I try to start it, it says
bash: ./bin/instance: /home/atf/Plone-3.3.6/Python-2.4/bin/python: bad interpreter: No such file or directory
looking for python in the old folder. How can I update this and are other things likely to be broken after fixing this?
It currently thinks your python is at:
/home/atf/Plone-3.3.6/Python-2.4/bin/python
Just re-run bootstrap with the new python:
/path/to/where/python/is/now bootstrap.py
Then
./bin/buildout
Related
I have integrated the git version control to an existing project in Rstudio(Windows). After that for every change I make in the Rmd file, a pop up is coming. I could see that it is a git bash executing on every command I have added in the file. I do not have more details on this.
Actually solved it myself just now with the help of this info:
https://stat545-ubc.github.io/git03_rstudio-meet-git.html
WARNING: On Windows, do NOT use C:/Program Files (x86)/Git/cmd/git.exe. The difference between the good and bad paths is bin vs. cmd.
My Rstudio-version was setting the cmd/git.exe as default.
If you change that to bin/git.exe my problem was solved...
I'm trying to get PyQt5 working with WinPython. PyQt5 comes with a readme file for installation, and I have unsuccessfully tried a few combinations of what I thought the first part of the readme tells me to do.
I have:
Windows 7 Home Premium 64-bit
WinPython-64bit-2.7.9.1
Qt 5.4
PyQt-gpl-5.4
PyQt-gpl-5.4 is in the folder (only partially sure that this is where I should have put it)
C:\WinPython-64bit-2.7.9.1\python-2.7.9.amd64\Lib\site-packages\PyQt-gpl-5.4
My current attempt at getting everything working is: I'm trying to run the configure.py file in PyQt-gpl-5.4, but when I do so I consistently get the following error:
Error: PyQt5 requires Qt v5.0 or later. You seem to be using v4.8.6.
Make sure the correct version of qmake is on your PATH.
What I think is the required version of qmake being referred to is in the folder
C:\Qt\5.4\mingw491_32\bin
However, I have no idea how to fix the error by adding the qmake in this folder to PATH. My most recent attempt was to add the folder using Spyder's Tools->PYTHONPATH manager, but this made no difference. I also tried adding it using sys.path.append('C:\Qt\5.4\mingw491_32\bin'), but this didn't work either. I have since removed the folder name from both of these locations.
How do I get PyQt5 working with WinPython-64bit-2.7.9.1, or I think equivalently, how to I get the configure.py file in the PyQt-gpl-5.4 folder to run?
Thanks.
You definitely don't want the source code (i.e. PyQt-gpl-5.4) in the site-packages folder, because that's where the compiled modules will end up. Instead, it should just go in a temporary folder whilst you compile it.
When you run configure.py, you must take care to use the executable for the specific python that you are targeting. I do not know anything about WinPython, but for a normal python installation this means doing something like this:
C:\Python34\python configure.py
As a first step, before attempting to actually compile anything, it would be advisable to take at look at all the configuration options that are available, like this:
C:\Python34\python configure.py --help
(There's also the Installing PyQt5 section in the PyQt Docs).
This will tell you, for instance, that the simplest way to specify the Qt installation you are targeting would be something like this:
C:\Python34\python configure.py --qmake C:\Qt\5.4\mingw491_32\bin\qmake
EDIT:
Sorry, that last part is wrong: the --qmake option isn't available on Windows, so you have to add the directory containing the qmake executable to your PATH. This can be done with the following command:
set PATH=%PATH%;C:\Qt\5.4\mingw491_32\bin
I wrote a .spec file on RHEL and I am building RPM using rpmbuild. I need ideas on how to handle the situation below.
My RPM creates an empty logs directory when it installs first time within the installation folder like below
/opt/MyInstallation-1.0.0-1/some executables
/opt/MyInstallation-1.0.0-1/lib/carries shared objects(.so files)
/opt/MyInstallation-1.0.0-1/config/carries some XML and custom configuration files(.xml, etc)
/opt/MyInstallation-1.0.0-1/log--->This is where application writes logs
When my RPM upgrades MyInstallation-1.0.0-1, to MyInstallation-1.0.0-2 for example, I get everything right as I wanted.
But, my question is how to preserve log files written in MyInstallation-1.0.0-1? Or to precisely copy the log directory to MyInstallation-1.0.0-2.
I believe if you tag the directory as %config, it is expected that the user will have files in there, so it will leave it alone.
I found a solution or workaround to this by hit and trial method :)
I am using rpmbuild version 4.8.0 on RHEL 6.3 x86_64. I believe it will work on other distros as well.
If you install with one name only like "MyInstallation" rather than "MyInstallation-version number-RPM Build Number" and create "logs directory as a standard directory(no additional flags on it)[See Original Question for scenario] Whenever you upgrade, you normally don't touch logs directory. RPM will leave its contents as it is. All you have to do is to ensure that you keep the line below in the install section.
%install
install --directory $RPM_BUILD_ROOT%{_prefix}/%{name}/log
Here, prefix and name are macros. That has to do nothing with underlying concept.
Regarding config files, the following is a very precise table that will help you guarding your config files. Again, this rule can't be applied on logs our applications create.
http://www-uxsup.csx.cam.ac.uk/~jw35/docs/rpm_config.html
Thanks & Regards.
I'm using a Windows 7 x64 machine with R-3.1.0. I installed the Rserve package through Rstudio.
The start of Rserve is successful with the following code in Rstudio:
library(Rserve)
Rserve()
I got the following output:
Starting Rserve...
"C:\R\R-31~1.0\library\Rserve\libs\x64\Rserve.exe"
My problem is that I couldn't locate the configuration file. Apparently it can't be "/etc/Rserv.conf".
I did come across a webpage saying that the config file is Rserv.cfg in the working directory (unless changed at compile-time). But which working directory? I have checked the working directory of the current R project as well as the Rserve library directory, but it was not there...Could someone help me with this please? Thank you.
Rserve does not automatically come with a config file, you must make one. Best steps for doing so:
Navigate to the file where you just installed Rserve.exe (C:\R\R-31~1.0\library\Rserve\libs\x64\R, based on the message you copied here)
Find Rserve.exe, Reserve_d.exe, and Rserve.dll there. Copy these files.
Navigate to where R.dll is on your computer. This is probably C:\Program Files\R\R-3.1.3\bin\x64, but may be different depending on where you installed R to.
Copy the 3 files mentioned above to this location.
Create a text file here named "Rserv.cfg" with the arguments you are looking for, such as port 6312 or library(mvoutlier). Yes, I know that this is different from the documentation, but if you start Rserve_d.exe you will see that this is the file it is looking for. I have not had success naming it anything else.
You can start Rserve by specifying the location of the config file. In R instead of just Rserve() try the following:
Rserve(args="--RS-conf C:\\folder\\Rserv.cfg")
If path is more complicated you need to massage it a little bit:
Rserve(args="--RS-conf C:\\PROGRA~1\\R\\R-215~1.2\\library\\Rserve\\Rserv.cfg")
Look in the $RHOME/bin directory
If you can't find it here is a different way to approach it:
Download Rserve at [http://rforge.net/snapshot/Rserve_.tar.gz], and save it in your desired directory
Run R CMD INSTALL Rserve_.tar.gz
This allows you to leave Rserve where you want it.
After looking at the Rserve source code and making some test I found that on Windows platform Rserve try to load the configuration file from the current working directory. Also pay attention because on Windows the file name is RServ.cfg and not Rserv.conf as documented.
The current working directory depends of the process, for example using RStudio by default it is your Documents and Settings folder:
C:\Users\[username]\Documents
but can be changed in the "Global Options" of the IDE
So you can create an "RServ.cfg" text file in that directory with your needed options and starting RServe in the usual way in RStudio
Rserve()
will load your configuration.
On windows after running the grunt build command for creating brackets shell it gives done without errors but i dont see any .exe file generated..
What might be the problem???
Here are some possible solutions:
Are you following the full brackets-shell build instructions, including all prerequisites?
Make sure Brackets isn't running at the same time. The build will fail silently if the .exe file is currently in use (see bug).
Try with a fresh git clone of the repo. If your brackets-shell local copy has been around for a while, sometimes the build & deps folders can get in a bad state. (I'm assuming you haven't modified the source at all. If you have, try with an unmodified copy of the source first to make sure it builds correctly without any of your changes).
Check that python --version shows 2.7.x
Verbose build output would also be helpful in diagnosing issues like this, but unfortunately there's not yet an easy way to get that...
If you follow the instructions on bracket-shell's wiki page, the Windows executable should be created in the Release directory.