QAbstractItemModel testing using modeltest - qt

I'm looking for a good tutorial on how to use modeltest to test models based on QAbstractItemModel. I don't know how to interpret debug messages that are displayed.
Also I'm having trouble configuring modeltest project to work with my app in QtCreator. Including the .pri/.pro doesn't work. I get an error saying "No rule to mage target ..". After fixing paths in modeltest/modeltest.pro file it starts to compile. But i get this wierd assertion
ASSERT: "QTest::testLogger" in file c:\ndk_buildrepos\qt-desktop\src\testlib\qtestlog.cpp, line 232
Any ideas why this happens ?
My modeltest folder is located inside my project. I added following line at the end of my *.pro file
include(modeltest/modeltest.pri)
The modeltest.pri file contains the following
load(qttest_p4)
SOURCES += modeltest/modeltest.cpp modeltest/dynamictreemodel.cpp
HEADERS += modeltest/modeltest.h modeltest/dynamictreemodel.h
I modified my code to use modeltest this way
model = new TasksModel(this);
new ModelTest(model, this);
ui->treeView->setModel(model);
TasksModel is my implementation of QAbstractItemModel model.
ui->treeView is the widget that displays data.
No other modifications where made while integrating modeltest with my app.
Qt version is 4.7.

This will sound a little overgeeky - but it is, in fact, what the ModelChecker dev intended for you to do ;) When you hit one of the asserts, go to the point in the code where it is hit and read the comments which are written along with it. The entire thing is extremely heavily commented, and describes what is breaking and likely reasons why. This is by far easiest to do if you run your app through a GUI debugger, such as that included in for example KDevelop, Qt Creator or Visual Studio.

The reason you are getting this error is because you aren't actually using the ModelTest inside a proper QTestLib test case. If you take a look at /tests/auto/modeltest (where you presumably got the modeltest class in the first place), you can see how to properly construct a test case using the ModelTest.

Related

No Way to get the console handle (Dev-Pascal)

I've tried the simple program for my exercise but if i compiled, it turned give a message "No Way to get the console handle" (Dev-Pascal).
Here's my code:
program square;
uses crt;
var
side,circumference,broad:real;
begin
write('Input the side value of the square: ');
readln(side);
circumference := 4 * side;
broad := side * side;
writeln('The circumference value of the square = ', circumference);
writeln('The abroad value of the square = ', broad);
writeln();
write('Press any key...');
readkey();
end.
thank you for helping and teaching me
i would appreciate
Dev-pascal comes with a 10+ years old Free Pascal version. I really have no idea. Try to run the example on the cmdline to see if dev-pascal is the cause or something else. Temporarily disable security software might also be something to try.
I suppose, you've created a Window Skeleton project.
It has it's description: A Windows skeleton application (no window).
In this case you'll get this error though you code compiles (I've got this error too with your code).
Try to create Console Application project which has it's own description: A standard console-based (MS-DOS) application (Your code has compiled and the program worked as well).
P.S. Can't say what exactly happens -- couldn't find any documentation about errors in Dev-Pas (1.9.2).
My assumption is that skeleton program doesn't imply console window for execution program while console application does.
just close the project and then re-open the pascal source file (.pas). And maybe put "readln;" just before "END.".

Why creating model in any other location than client, meteor runtime throws exception?

I am a meteor newbie. I am trying out by building a simple app and it does nothing but shows list of items. I first tried out with hard coded model values in my client javascript code and it worked just fine. I then created a folder called 'model' under root of the application and created the model there like the following
Favorites = new Meteor.collection("favorites")
with this change, meteor throws exception pointing to this line of the file on load. If I move this code to client the code works ofcourse that is wrong. The full code is # https://github.com/ksunair/13favs It is a very simple solution has few files and less than 20 or 30 lines altogether. My client code is,
Template.favorites_main.helper({
favorites:Favorites
});
I did the following in order to clear your app of errors:
Favorites = new Meteor.Collection("favorites"); (Collection starts with a capital C)
I moved model/mainmodel.js to lib/mainmodel.js so Favorites would be available as soon as the template rendered. I always put my models under lib (or in a subdirectory) so they will be loaded first. This contradicts what I see in other places including discover meteor, so I'm unclear what the best practice is. In any case, it fixed the problem.
$ meteor add accounts-ui was needed because you referenced Accounts.ui.config.
You need to actually do a find in your favorites_main template. So it should look something like:
Template.favorites_main.helpers({
favorites: Favorites.find();
});

Websphere & Tivoli: NPE while trying to create PDAuthorizationContext

I am getting the following error when I try to start my Application...
[java.lang.IllegalStateException: java.lang.NullPointerException^M
at com.tivoli.pd.jutil.kb$1.run(kb$1.java:41)^M
at java.security.AccessController.doPrivileged(AccessController.java:229
)^M
at com.tivoli.pd.jutil.kb.c(kb.java:141)^M
at com.tivoli.pd.jutil.kb.(kb.java:56)^M
at com.tivoli.pd.jutil.PDContext.(PDContext.java:76)^M
at com.tivoli.pd.jazn.PDAuthorizationContext.(PDAuthorizationConte
xt.java:66)^M
I double checked the config file was accessible and I could read it. The code I am using looks as follows...
aC = new PDAuthorizationContext(cFile);
Is there a way to get more information on what is causing the NPE?
More information!!!
After debuging a bit, it appears the issue comes from this code (they use progaurd so it is a little hard to be 100% confident)...
Certificate[] arrayOfCertificate1 = ((KeyStore)???).getCertificateChain("DefaultID");
//Throws Null pointer (presumably because array is null)
Certificate localCertificate1 = arrayOfCertificate1[0];
EVEN MORE INFO
This appears to be some kind of dependency conflict (guess), because if I just create a sample App using PDAuthorizationContext it works fine.
Problem was related to the PD.jar version that I was using. Although I thought I was using one version I was using another. This was because on version was registered in my WebSphere library (under build path in eclipse). Once the proper library was introduced everything worked.

How can I programmatically add build files to Xcode4?

I've been trying to figure out how to programmatically add files to an Xcode4 project and it seemed like AppleScript would be the way to go, however I'm running into "missing value" errors.
Here's the code I've got:
tell application "Xcode"
set theProject to first project
set theTarget to first target of theProject
set theBuildPhase to compile sources phase of theTarget
tell first group of theProject
set theFileRef to make new file reference with properties {full path:"/Users/jeff/Projects/XcodeTest/XcodeTest/MyViewController.h", name:"MyViewController.h", path:"XcodeTest/MyViewController.h", path type:group relative}
add theFileRef to theProject
end tell
--tell theBuildPhase to make new build file with properties {build phase:theBuildPhase, name:"MyViewController.h", file reference:theFileRef, target:theTarget, project:theProject}
end tell
I've tried the commented-out line instead of the add-command as well, but that doesn't work either (I get "missing value").
The 'add' error is:
error "Xcode got an error: file reference id \"251AD3431432472E006E300F\" of Xcode 3 group id \"251AD32C14324645006E300F\" of project \"XcodeTest\" of workspace document \"XcodeTest.xcodeproj/project.xcworkspace\" doesn’t understand the add message." number -1708 from file reference id "251AD3431432472E006E300F" of Xcode 3 group id "251AD32C14324645006E300F" of project "XcodeTest" of workspace document "XcodeTest.xcodeproj/project.xcworkspace"
The "make new reference" does add the file to the list of files in Xcode, but I also need it to be added to the project target so that I can add actions and outlets to the file from Xcode w/o having to first check the checkbox to add it to the "target membership".
I ended up sending this question to the devs on the xcode developer list and the response I got was effectively "you can't".
This appears to be completely broken in Xcode4, but I've seen a project that does it. I think what they are doing is parsing and modifying the "project.pbxproj" file directly. (this file is hidden inside the xcodeproj bundle)
The file is a GUID soup, but once you look at it for a while it seems possible to safely modify it, especially if you are only adding stuff.
Edit:
Found this stackoverflow answer that might help.
Tutorial or Guide for Scripting XCode Build Phases
There is a poorly documented user defined build setting that can be added. Files can be both excluded and included from compilation
Go to your target's Build Settings > Tap the + button > Add User-Defined Setting
The key is either INCLUDED_SOURCE_FILE_NAMES or EXCLUDED_SOURCE_FILE_NAMES
The value is a space separated list of file paths
See reference:
http://lists.apple.com/archives/xcode-users/2009/Jun/msg00153.html

Specflow error using TestDriven.Net - Couldn't Find Type

I'm trying out Specflow for the first time, and have created a VS2010 project with a reference to TechTalk.SpecFlow, as well as nunit.framework. I've added a sample Feature file:
Feature: Addition
In order to avoid silly mistakes
As a math idiot
I want to be told the sum of two numbers
#mytag
Scenario: Add two numbers
Given I have entered 50 into the calculator
And I have entered 70 into the calculator
When I press add
Then the result should be 120 on the screen
When I execuyte the test (using TestDriven.Net), I get the following error:
Test 'T:SpecFlowFeature1' failed: Couldn't find type with name 'SpecFlowFeature1'
System.Exception: Couldn't find type with name 'SpecFlowFeature1'
at MutantDesign.Xml.Documentation.MemberInfoUtilities.FindMemberInfo(Assembly assembly, String cref)
at TestDriven.TestRunner.AdaptorTestRunner.Run(ITestListener testListener, ITraceListener traceListener, String assemblyPath, String testPath)
at TestDriven.TestRunner.ThreadTestRunner.Runner.Run()
Anyone know what I'm missing?
Actually traced this down to how I was running the test. Right clicking the ".feature" file (or anywhere within that file) and selecting "Run Tests" resulted in the error. Right clicking the underlying ".feature.cs" file and selecting "Run Tests" executed correctly. Looks like TestDriven.Net wasn't able to "understand" the "*.feature" file.
I typically start "Couldn't find type..." errors in my references folder and make sure that the library that I'm referencing is being referenced correctly and that the version that's being referenced isn't outdated.
Also, make sure that your SpecFlowFeature1 class isn't mistakenly declared as private. Visual Studio creates new classes (by default) as private and if you don't specify a class as public, it will remain private and not "visible" to outside projects.

Resources