A site have run ok for some time. But recently, when I upload a image, it is always raising this error:
An unrecoverable error occurred. This form was missing from the server cache. Try reloading the page and submitting again.
The first time i uploaded the image is ok. but when I create the second article and upload a image, it shows the above error. And the upload button disappeared.
Does anyone konw how to correct it and what's the reason of this error emergence ?
Apparently the problem is not Drupal. Most likely a setting on the server. If you use hosting services. please contact support, they may be something advise. Also recommend looking into the FAQ page the module loads the image coordinates.
Also, to test this problem, try to move the website to your local kompyuter and test does not appear whether this problem. Good luck. And update all the modules before actual sosoyaniya. Poeksprimentiruyte module load module dev.
Some other users have had the same sort of issue. See this thread on Drupal.org and this question at Drupal Answers.
Try to disabling caching under admin/settings/performance and set minimum lifetime to none. Also try clearing the caches on your site and in your browser and try again.
The problem is in cache_get() function inside includes/cache.inc file.
At line no. 42, there is a check :
if (isset($user->cache) && $user->cache > $cache->created)
Time of user cache, is always coming as bigger than cache's creation time. That is why, this function returning zero and file is not uploaded.
However I could not find the solution yet.
Related
I have a running Kentico 11 portal engine site and need to update the transformations in my navigation menu control. Something I have done many times before.
Today I went through all of the steps and the save button does not update the code. It never displays the change were saved messaging.
When I open the browser dev tools I see several errors on the page:
errors
A couple of things to check.
Is this happening in different browsers, also?
Can you save other transformations?
On this particular web part, if you select a different transformation, will that save successfully?
And, is the event log registering any errors?
Sounds like it may be a caching issue. What I'd suggest is the following:
restarting IIS
Open a private browser window and log in
attempt to make an edit to the code in question
If this does not resolve the issue, have you made any changes recently to the web.config, in particular the CMSHashstringsalt value? If so, this will cause your macros to become invalidated. You'll need to go to System > Macros > Signatures and check both boxes and resign the macros. It may take some time depending on your site but this could also help resolve your issue.
I am testing/learning how to send info from a Gravity form to a test file on my website.
I am using a testfile.txt that I added in var/www/ which is the location of the Wordpress directory.
The command I am running updates that file and I am able to see its contents when i go to the domain: mywebsite.com/testfile.txt.
The first time I run the Gravity form, I can see the changes on the webpage. However, after updating its contents to something else, the webpage does not update despite reloading it.
To troubleshoot this, I SSH'd into the server to see if the file was being updated and indeed it was...
So, basically, the file is being updated on the server but not on my GoDaddy domain... Has anybody encountered a problem like this? And if so does anyone have a solution?
I am no Expert in this field, Beginner to be honest. When I was learning Python flask a framework for building website, I had similar issue. Maybe the problem is that, when you visit your website it loads from the cache. To solve that press 'ctrl + F5', it forces a cache refresh, and will guarantee that IF the content is changed, you will get the new content. Again, I am beginner myself.
As #Sadman said, whenever I don't see my content getting updated I do a hard refresh or delete the cookies and cache manually. Either one of these solved my problem. To make a hard refresh press ctrl+shift+r or ctrl+f5 or shift+f5 on windows. On MAC this is cmd+R. I hope this helps!
I am currently building a website using drupal 7.x. Unfortunately I cannot seem to enter the admin/config page. Every time I click on the configuration tab on the administration menu, I only get a blank page. Then I created another sample site. It also has the same problem and I am using WAMP server. I cleared cache and finds no difference. I have searched for similar issues, but could find none. Can someone please tell me what I am doing wrong?
A number of things can cause the White Screen of Death, but the most common things to check:
As suggested above, memory limit may need to be increased.
Have you enabled any modules other than those in Drupal core? Try disabling contributed modules and enable individually until you experience the error, to help you identify which module is causing trouble. If you can't access the modules admin page, you can disable them in the database - the system table has a 'status' field. 1 means enable, 0 is disabled.
Could it be a permissions issue? Check admin access permissions or try logging in as the superuser (user ID 1).
Lots more and discussion here and here.
Finally I got the answer. Increase the max_execution_time in php.ini file. It solves the issue.
A few things to try...
Check your php error log for clues.
Create a simple file that calls phpinfo() and see what your memory_limit is. It may need to be increased.
Try tweaking your php.ini to get it to display an error message instead of a blank page.
I tracked this very issue to l10_update module, once I enable it, admin/config shows the WSOD. Once I disabled it, everything's fine. So:
- unchecking the localization_update module in the "modules" list
- de-installing it from the modules list
- deleting directory sites/all/modules/l10n_update
- and re-installing the module (from the same tar.gz file)
Source: https://www.drupal.org/node/1141160
This has been extremely frustrating. I installed a module Finder in Drupal installation. I was tweaking some settings in it and then after changing some settings it started showing off some Ajax errors and then there was the White Screen, showing this error:
Fatal error: Call to undefined function views_include() in /var/www/drupal/sites/all/modules/views/includes/plugins.inc on line 9
Using Drush, I disabled the Finder module and cleared the cache. But nothing happened. Then I disabled the Views module. The White Screen was now gone.
And now I am stuck. I had some pretty good work done in this site and when I re-enable the Views, White Screen reappears. It seems to me like the Finder module made some irreversible changes somewhere in Views. I mean how come my Views is not working when I've cleared the cache and Finder is disabled?
Has anybody ever come across such a thing in Drupal? How did you solve it?
UPDATE
I just found that the developer of the "Finder" module is claiming it to be a bug in Views. See here: http://drupal.org/node/1611106. As suggested, commenting out that particular line 9 in plugins.inc of Views module does work. However, I'm still skeptical to accept to be a bug in Views.
It's not Finder; it's either Drush botching an update or perhaps you relocating the module, causing the registry to become out-of-date. Check that views.module actually exists, Views is enabled in the system table and then rebuild the registry as nmc suggested.
That should fix it but, at worst, you can comment out the views_include('base'); call at the top of plugins.inc as a quick hack to recover your site.
I just got this error too. Funny enough it was also while playing around with settings in the finder module. Playing with the ajax settings to be precise.
Anyway, to get your site back when you get the error and white screen, close your browser and reopen it a a page other than your site and clear all the browser cache. You should then be able to see your site again.
It happen to me after setting 'Ajax' to 'yes' under the form heading on the edit finder page.
After you have reopened your browser and cleared the browser cache, go straight to the edit page for the finder that is the culprit and set 'ajax' to 'no'.
Perhaps the Registry Rebuild module may help you.
When would you need Registry Rebuild?
You might get something like:
PHP Fatal error: Class 'EntityAPIControllerExportable' not found in
...sites/all/modules/rules/includes/rules.core.inc on line 11
If this happens when you're trying to run update.php, and happens when
you're trying to clear your cache, well, you have some trouble. That's
what Registry Rebuild is for.
I've never used it myself so I recommend that you look into the code before running it but I hope it helps you.
See
http://randyfay.com/node/105 and
http://drupal.org/project/registry_rebuild
For me, rebuilding the registry with drush rr didn't work. Disabling the module, uninstalling ad reinstalling didn't help also. The only thing which worked was to clear the sessions table.
I have installed kloxo control panel, this is the address http://173.212.227.142:7778/. Then I made domain for my test site, which shows me preview from this link, http://173.212.227.142:7778/sitepreview/kids.com/index.html, which is right.
Now I have installed drupal but it is very hard for me to set here. I have made changes in configuration file like database, and in base_url. But didnot getting the site and it shows me a blank page.Site should come with this address, http://173.212.227.142:7778/sitepreview/kids.com/kids/index.php. I made the base_url as http://173.212.227.142:7778/sitepreview/kids.com/kids.
Please suggest me the solution.
Thanks
If you have a problem in your settings.php file, Drupal won't be able to connect to the database but will show you a page telling you such. The White Screen of Death means there is some kind of php error. It is difficult to know what kind of error from your description. Look in your error logs for php errors and tell us what you see, and it will be easier to help you out.
The white page could be the result of a php error, possibly due to a configuration/setting oversight. You should check your Webservers error log(s) for this, as they might give you some hints on possible causes.
Read this: http://drupal.org/node/158043