I have XCode4 installed in my Developer folder, and XCode3 installed in another folder called XCode3. I would like to completely remove XCode3. How can I do this?
If you don’t need Xcode 3 anymore, move XCode 3 to ‘/Developer-old’ then just run in your terminal:
sudo /Developer-old/Library/uninstall-devtools --mode=all
This removes all Xcode3 files, freeing up about 5Gb of space.
Related
When I am removing files from Jupyter notebook environment, the disk space does not free up. I removed for about 40GB files and files disappeared from list, even from ls -a, however df -h shows that nothing happened. Also I killed all the processes using these files and even rebooted the system.
When I remove files using rm everything is fine. How can I free up space, or restore thos files to delete them using rm?
I also encountered the same issue, but later found out that files deleted in jupyter notebook are automatically moved to the trash, which is not permanently deleted instantly.
This function was added very early ago: https://github.com/jupyter/notebook/pull/1968
Thus, to free up space, you need to go to your computer's trash folder to completely delete those files. In Linux, you can do rm -rf $HOME/.local/share/Trash/files to empty trash.
In Windows or MacOS, you just need to "Empty Trash" in the desktop folder
To restore those files, try to access them in your Trash folder, which is located in the .local folder in your home directory (in my system.).
This worked for me. I'm using jupyter lab with Amazon Linux 2 AMI.
Ref.
recycle bin in linux:
https://www.pcquest.com/recycle-bin-linux/#:~:text=Henceforth%20whenever%20you%20delete%20a,SYSTEM_ROOT%20of%20the%20Trash%20directory.
I freed up the space and solved the issue when I was working with workbench(Google Cloud Vertex AI). Applicable to AI platform too. Open terminal from workbench File>New>Terminal
df -h -T /home/jupyter
Above code helps to know the free size
Then this code below will delete the trash to free up the size
sudo rm -rf /home/jupyter/.local/share/Trash/*
After deleting the trash
So i was trying to install the XP Pen Driver for my Deco 01 v2 graphics tablet on my Linux Mint 19.2 Tina when i came to encounter the following error:
./Pentablet_Driver: /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version `Qt_5.10' not found (required by ./Pentablet_Driver)
I went on to install qt 5.10, still the same error. Others suggested to just change the path wth sudo gedit /etc/ld.so.conf.d/randomLibs.conf which didn't change a thing.
Link to drivers:
https://www.xp-pen.com/download-440.html
The manufacturer has a page describing how to set up their software on Linux with pictures. However, when following them, you end up with a folder name somewhere along the line that has spaces in it, which causes issues.
So a modified set of instructions might look like this:
Connect your XP-Pen product to the computer.
Download the Linux Beta driver from XP-Pen official website.
When the download is complete, extract the compressed folder.
Rename the extracted folder to something without spaces.
Inside the renamed folder is another compressed folder which should be extracted.
Inside the final extracted folder, ensure "Pentablet_Driver.sh" has execution permissions by right clicking on it and going to "Properties->Permissions" and verifying that "Allow executing file as program" is checked.
Open the terminal. (CTRL+ALT+T)
Type "sudo ", then drag Pentablet_Driver.sh from the file browser onto the terminal.
Type the password to complete.
Make sure that you write exactly
sudo ./Pentablet_Driver.sh
instead
sudo ./Pentablet_Driver
I had the same error until I noticed that I forgot to add .sh at the end.
This is not a big problem but it's bothering me. I've installed it in Program Files (x86), already found many old solutions which didn't work for me. I can't install it in another location. I've tried to change the ico to a different one located in a path without spaces, but it didn't work.
Git CMD icon works fine (but I don't like this terminal), the problem persists only with GitBash icon
Can someone help?
Sometimes it could be purely because of the shortcut referring to a previous installation which no longer exists. Check properties by right-clicking on git bash terminal's taskbar icon.
If that's the case
Delete the shortcut or
Replace the path with the current installation directory.
The icon was missing in older versions (2.10: see issue 870)
In your case, make sure to install the latest 64-bits version (in Program Files, not Program Files (x86))
That would be: Git-2.15.0-64-bit.exe.
Update Oct. 2022: this is still working correctly.
I am having an issue where I do meteor run in my project, and it begins to install meteor-tool#1.4.0-1, once it is 100%, it says
Extracting meteor-tool#1.4.0-1...
but it never finishes. I uninstalled meteor and reinstalled it but I am having the same issue.
United State.
Windows 10.
This is a problem caused by the tar extractor provided by Git.
Find where is located the tar tool used by your system, running:
$ where tar
In my case, it is located in C:\Program Files\Git\usr\bin\tar.exe
Then locate the file and rename it to tar.exe.old
Its done... try running Meteor again! >> $ meteor
Thank you for your response, Vasil. I actually was able to find a solution and I am no longer experiencing this problem.
Turned out there was a problem with the tar.exe file in Git, and by uninstalling Git, and reinstalling it the latest version, 2.10.0.windows.1, the problem has seemed to go away.
It seemed that no matter how long I left it, it stayed stuck at "Extracting meteor-tools . . ." but now that I updated Git the problem has gone away.
Try adding the following to your local hosts file (C:\Windows\System32\Drivers\etc\hosts):
54.192.225.217 warehouse.meteor.com
Then run a meteor reset in your app directory (warning - will wipe your local DB), then try starting your app again.
This works for me.
Link: https://forums.meteor.com/t/downloading-meteor-tool-1-4-0-1/27269/19?u=lucianopestana
I downloaded GNAT ADA GPL 2014 and now trying to install on my Mac.
The directions below are the ones I am following, but I do not know where to look to find the file called doinstall. I might still need some help after finding it, but can anyone help me out here?
Navigate to the directory that contains a file called: doinstall
Enter: sudo mkdir /usr/local/gnat
Enter: sudo ./doinstall
Update your path as needed for your shell
You should have downloaded gnat-gpl-2014-x86_64-darwin-bin.tar.gz.
Go to some temporary directory (I use ~/tmp):
cd ~/tmp
Unpack the download, which creates a directory gnat-gpl-2014-x86_64-darwin-bin containing the binary distribution to be installed:
tar zxvf ~/Downloads/gnat-gpl-2014-x86_64-darwin-bin.tar.gz
Enter that directory, which contains (amongst others) doinstall:
cd gnat-gpl-2014-x86_64-darwin-bin
Execute doinstall to enter the installation dialog:
sudo ./doinstall
Remove the unpacked download:
cd ..
rm -rf gnat-gpl-2014-x86_64-darwin-bin
Now you can update PATH as needed for your shell.
What Simon Wright said is correct, but if you're running on Yosemite there's an extra problem: for some obscure reason, Adacore GNAT is broken on Yosemite. You have to make it think it's compiling for Mavericks:
export MACOSX_DEPLOYMENT_TARGET=10.9 # Yosemite workaround
That can go in a few different places, but I put it near the top of the /usr/local/gnat/bin/gps script so it doesn't interfere with the xcodebuild environment.
Also, I found GTKAda to be nearly impossible to install from source; if you download the XNAdaLib-GPL package from http://sourceforge.net/projects/gnuada/ you can install that and get everything you need without having to wade through Adacore's mess. (You may want to use the Adacore version of Glade for GUI design though; for some reason the Sourceforge package's version is localized in French and I'm not sure if it can be switched to English.)
Finally, since this is a bit duct-tape-and-baling-wire, I would recommend not shipping any production mission-critical code with this environment; either roll back to Mavericks or wait for GNAT 2015.