I have two ASP.NET applications using Forms Authentication and Single Sign On and I would like to persist Session variables between them.
Upon testing, I cant seem to get the Session variables to be read from the other application. Both apps are on the same domain (app1.domain.com & app2.domain.com) and I have set up my config (a.f.a.i.k.) correctly to reflect this.
I have noticed that when testing on the release server the session id is different even when using tab pages on the same browser (I thought they would be the same!), yet debugging on my local IIS the session id is the same (and I still cant read session variables across sub-domains).
Anyone got any pointers to what I may have missed?
Best Regards
By default, SessionState mode is InProc which means Session State data is stored in each AppDomain's memory. AppDomains are isolated, and they do not share SessionState.
You need SQLServer or StateServer as SessionState mode.
Site hosted via IIS 7.0
I would like to set my session time-out to 9 hours in my ASP.NET application.
This has been set at web.config
<sessionState timeout="540"></sessionState>
But, as I understand, if the timeout is set as 20 minutes inside the IIS where the website is hosted, setting an extended session state will be of no use.
Firstly, I would like to confirm whether this assumption is right.
The problem is that I do not have access to the IIS of my shared hosted web server.
Now, after some research, I came up with another solution in code project. This sounds like a wonderful idea. The idea is to insert an iframe to master page. The iframe will contain another page with meta refresh less than 20 minutes.
Response.AddHeader("Refresh", "20");
This idea seemed good for me. But the article is 7 years old. Plus at comments section a user complaints that this won't work if the page is minimized and I am worried that the same happens when my pages tab is not active.
I would like to know these things
Whether the refresh method will work for my scenario , even if the page is minimized?
Are there any other methods that could increase session time out that overrides IIS timeout setting?
Also I read some questions in Stack Overflow where the answers state that the IIS session timeout is for clasic ASP pages. Then why is not my extended timeout not firing?
Firstly, I would like to confirm whether this assumption is right.
Yes, this assumption is absolutely right in case you are using in-memory session state mode. In this case the session is stored in memory and since IIS could tear down the AppDomain under different circumstances (period of inactivity, CPU/memory tresholds are reached, ...) the session data will be lost. You could use an out-of-process session state mode. Either StateServer or SQLServer. In the first case the session is stored in the memory of a special dedicated machine running the aspstate Windows service and in the second case it is a dedicated SQL Server. The SQL Server is the most robust but obviously the slowest.
1) Whether the refresh method will work for my scenario , even if the page is minimized?
The hidden iframe still works to maintain the session alive but as I said previously there might be some conditions when IIS unloads the application anyway (CPU/memory tresholds are reached => you could configure this in IIS as well).
2) Are there any other methods that could increase session time out that overrides IIS timeout setting?
The previous method doesn't increase the session timeout. It simply maintains the session alive by sending HTTP requests to the server at regular intervals to prevent IIS from bringing the AppDomain down.
3) Also I read some questions in Stack Overflow where the answers state
that the IIS session timeout is for clasic ASP pages. Then why is not
my extended timeout not firing?
There is no such thing as IIS session timeout. The session is an ASP.NET artifact. IIS is a web server that doesn't know anything about sessions.
Personally I don't use sessions in my applications. I simply disable them:
<sessionState mode="Off"></sessionState>
and use standard HTTP artifacts such as cookies, query string parameters, ... to maintain state. I prefer to persist information in my backend and retrieving it later using unique ids instead of relying on sessions.
I deployed an ASP.net web site to two servers and put them behind the load balanced environment. Now that problem is that the performance is really slow. Even for just simple button event, it takes long time to finish the simple button event. However, if I access the site separately (by its server’s address), performance is good. What our system engineer told me was that the application handles session state in process as if it runs on only one server, it could not handle clustering. So, he suggested that I should use the session object in the code to store the session in SQL server, or cookie.
I am currently using session variables to store the session.
I am kind of a new to ASP.net and I am not sure exactly what this mean and how I can accomplish this in my .net code (C#)?
Thanks.
Here is a good link to start you off: ASP.NET Session State
You would probably want to go with the Out of process mode where the servers all access 1 session process on a designated server, if speed is your top priority or SQL Server mode where all servers access 1 database if reliability is your top priority as with out of process mode if the process dies your session data is lost similar to how in-process session handling works.
No coding changes for storing session data would be needed, just the initial configuration of the environment and a web.config change.
First off, you need to configure sessionstate in your web.config for what you want to do. Here is a step by step tutorial on storing sessionstate in sql server. Hope it helps!
http://support.microsoft.com/kb/317604
I have an ASP.net application where Users aren't able to successfully complete certain actions, for reasons, I'm assuming, can only be related to losing their session (which is where I maintain their current user information, and how determine whether they are logged in)
I'm at a loss as to why they would lose their session, so my first question is:
What (in general) would cause a user to lose their session in ASP.net?
and since I don't know when a user loses their session and can't reproduce it myself:
How can I track when I user loses their session
Below is my sessionState config for reference
<sessionState
mode="InProc"
cookieless="false"
cookieName="My.Site.Com"
timeout="480"/>
A number of things can cause session state to mysteriously disappear.
Your sessionState timeout has expired
You update your web.config or other file type that causes your AppDomain to recycle
Your AppPool in IIS recycles
You update your site with a lot of files, and ASP.NET proactively destroys your AppDomain to recompile and preserve memory.
-
If you are using IIS 7 or 7.5, here are a few things to look for:
By default, IIS sets AppPools to turn themselves off after a period of inactivity.
By default, IIS sets AppPools to recycle every 1740 minutes (obviously depending on your root configuration, but that's the default)
In IIS, check out the "Advanced Settings" of your AppPool. In there is a property called "Idle Time-out". Set that to zero or to a higher number than the default (20).
In IIS, check the "Recycling" settings of your AppPool. Here you can enable or disable your AppPool from recycling. The 2nd page of the wizard is a way to log to the Event Log each type of AppPool shut down.
If you are using IIS 6, the same settings apply (for the most part but with different ways of getting to them), however getting them to log the recycles is more of a pain. Here is a link to a way to get IIS 6 to log AppPool recycle events:
http://web.archive.org/web/20100803114054/http://surrealization.com/sample-code/getnotifiedwhenapppoolrecycles/
-
If you are updating files on your web app, you should expect all session to be lost. That's just the nature of the beast. However, you might not expect it to happen multiple times. If you update 15 or more files (aspx, dll, etc), there is a likelyhood that you will have multiple restarts over a period of time as these pages are recompiled by users accessing the site. See these two links:
http://support.microsoft.com/kb/319947
http://msdn.microsoft.com/en-us/library/system.web.configuration.compilationsection.numrecompilesbeforeapprestart.aspx
Setting the numCompilesBeforeAppRestart to a higher number (or manually bouncing your AppPool) will eliminate this issue.
-
You can always handle Application_SessionStart and Application_SessionEnd to be notified when a session is created or ended. The HttpSessionState class also has an IsNewSession property you can check on any page request to determine if a new session is created for the active user.
-
Finally, if it's possible in your circumstance, I have used the SQL Server session mode with good success. It's not recommended if you are storing a large amount of data in it (every request loads and saves the full amount of data from SQL Server) and it can be a pain if you are putting custom objects in it (as they have to be serializable), but it has helped me in a shared hosting scenario where I couldn't configure my AppPool to not recycle couple hours. In my case, I stored limited information and it had no adverse performance effect. Add to this the fact that an existing user will reuse their SessionID by default and my users never noticed the fact that their in-memory Session was dropped by an AppPool recycle because all their state was stored in SQL Server.
I was having a situation in ASP.NET 4.0 where my session would be reset on every page request (and my SESSION_START code would run on each page request). This didn't happen to every user for every session, but it usually happened, and when it did, it would happen on each page request.
My web.config sessionState tag had the same setting as the one mentioned above.
cookieless="false"
When I changed it to the following...
cookieless="UseCookies"
... the problem seemed to go away. Apparently true|false were old choices from ASP.NET 1. Starting in ASP.Net 2.0, the enumerated choices started being available. I guess these options were deprecated. The "false" value has never presented a problem in the past - I've only noticed in on ASP.NET 4.0. I don't know if something has changed in 4.0 that no longer supports it correctly.
Also, I just found this out not long ago. Since the problem was intermittent before, I suppose I could still encounter it, but so far it's working with this new setting.
In my case setting AppPool->AdvancedSettings->Maximum Worker Proccesses to 1 helped.
Your session is lost becoz....
JUST MAKE SURE THERE ARE NO RUNTIME ERRORS, ANY FATAL EXCEPTION WOULD
KILL THE SESSION!
In Microsoft stack, Visual Studio - put Ctrl + Alt + E - All Exceptions ON, then run the code in Debugging mode. Any Fatal ones are THE reason for session loss..
You could add some logging to the Global.asax in Session_Start and Application_Start to track what's going on with the user's Session and the Application as a whole.
Also, watch out of you're running in Web Farm mode (multiple IIS threads defined in the application pool) or load balancing because the user can end up hitting a different server that does not have the same memory. If this is the case, you can switch the Session mode to SQL Server.
I was only losing the session which was not a string or integer but a datarow.
Putting the data in a serializable object and saving that into the session worked for me.
Had a problem on IIS 8 when retrieving Content via Ajax. The issue was that MaximumWorkerProcesses was set to 2 and Javascript opened 17 concurrent requests. That was more than the AppPool could handle and a new pool (without auth-data) was opened.
Solution was to Change MaximumWorkerProcesses to 0 in IIS -> Server -> Application Pools -> [myPool] -> Advanced Settings -> Process Model -> MaximumWorkerProcesses.
Dont know is it related to your problem or not BUT Windows 2008 Server R2 or SP2 has changed its IIS settings, which leads to issue in session persistence. By default, it manages separate session variable for HTTP and HTTPS. When variables are set in HTTPS, these will be available only on HTTPS pages whenever switched.
To solve the issue, there is IIS setting. In IIS Manager, open up the ASP properties, expand Session Properties, and change
New ID On Secure Connection to False.
I had same problem by losing sessions. every time , every page reload, my sessions clear and by new reload any page, my sessions returned by valid value...
i fixed it by change MaximumWorkerProcesses from 0 to 1 in iis
I was struggling with this issue for 14 days.
Here's what helped me:
Check your recycling options in App Pool > Advanced settings. Turn off all of the options so it won't recycle on its own.
Check your web.config file for the executionTimeout property under httpRuntime and increase its value.
Check your web.config file for the timeout property under sessionState and increase its value (I set it to 300 minutes).
Go to the server's event log and check the Application log for unhandled exceptions that may cause the worker process to crash. Fix them in your code or use try and catch to eliminate this crash.
Try changing the value of your maximum worker process from 0 to 1 or the other way around, this may also solve this issue.
In my case, session state was loosing due to Load Balancer. Session was storing in one server and Load balancer was redirecting next call to another server where session state was missing.
Can it be done or the only way is to configure it on IIS?
You edit generally the Global.asax file's Session_Start method and set Session.TimeOut to whatever you want. You can do this anywhere else in your code too.
you can, but it will not override the IIS settings (by default 20 minutos) if you are in a Shared Hosted environment.
what I do is apply the use of SQL Sessions, it will turn the web application a little more slow, but you have total control of the sessions and if you update something to the application and the Compiler needs to re-compile the resources/classes again, the user will not be logged out.
Sessions will be kept in a special table of the SQL database.
If your in a hosted environment and your not allowed to override IIS default session timeout (as others have mentioned in the comments), you can trick IIS into keeping the session alive for longer by using an iframe that refreshes the session over and over (kind of like a keep alive ping) for whatever interval of time you need. I had this situation and used this approach
ASP.NET Push Redirect on Session Timeout