I have recently begun using image sprites and they are definately great for reducing http requests. Is there a point where it becomes bad practice?
Im thinking particularly where a lot of extra markup has to be added to support them. For example, using them for list bullet points, I have to add two or three extra spans to get everything alligned etc.
Theres also the annoying point that you cant use repeating images, so therfore there is always the toss up between one large image as part of sprite or a tiny 1 pixel image used for repeating downloaded on its own.
Im really looking for an opinion on the two situations outlined here + any other general considerations/guidelines for using sprites.
They can often cause performance issues on mobile devices. I'm not 100% certain why (never really dived into the problem), but I'm assuming it's because the mobile webkit is loading a new copy of a relatively large image into memory for every instance of it on the page. Since mobile devices often have very small amounts of RAM, it can quickly cause the page to slow down.
I've run into this issue before when having about 300 "icon" sprites on a page at one time, each pulling from a sprite image that contained about 50 different icons. Going back to "normal" methods of one icon per image (or 2-3 for hover states) solved performance issues on this particular page.
Also, many browsers (mobile and otherwise) will often not 100% respect the clipping of sprites when you slightly resize the page content (e.g. using "Zoom In/Out" on the browser itself). You'll often see little pieces of the sprite next to the one you want to use.
As for your bullet example, you shouldn't ever need more than one extra div/span. You would set a margin-left on the li and position your "bullet div" in the empty space it creates.
That being said, I use sprites all the time because they're convenient, just be aware of a few issues with them. Generally, I have sprites.png, sprites_h.png and sprites_v.png for horizontally and vertically repeating pieces.
Write two simple test pages, use sprites on one, and not on the other. Use a tool like http://www.webpagetest.org/ to measure the performance in a few different browsers. Once you have data, you can make decisions.
I would divide sprites by related elements, like navigation and content-related sprites, so you can benefit from sprites and keep a logical order in your code. Don't forget that readable and understandable code should be a priority (particularly with CSS, it can get very messy) unless you're working on a Google-scale project.
Related
So, after a few days of research, I'm forced to write this question:
What is the best way to work with compass sprites ?
Using layout horizontal or vertical seems to work fine for me. But I'm not able to work with smart layout. I always face the same problem: when zooming the page (in or out) at some points, I can see a bit of a sibling sprite on my sprite. Its get overlapped.
Seems the only way to make it work is adding some space through compass sprite's configuration, but this is not supported with smart layout.
So, what to do ?
Use always an horizontal or vertical layout ? What is the performance impact ?
I mean, the size of the generated images will be very large as the number of sprites grows. And on compass's documentation they said that this can cause performance issues...
But using smart layout its totally useless for me because of this overlapping issues.
What do you people do usually ?
Its ok to go with horizontal or vertical layouts all the time and have the generated file growing vertical or horizontally without being in an optimal way ?
Asking this cause we gonna move soon to mobile and perform is a key point.
Thanks a lot in advance !
The limiting factor on the image size is total amount of pixels so if you put them in the row instead of square it should be ok. Also, if design allows, you can add to each sprite border with the element border and background so it will look ok.
But be aware that sprites have much less sense with upcoming internet standards. For example SPDY:
Don't use CSS sprites with external stylesheets - Resources in
external stylesheets are obviously only discovered after the external
stylesheet has been downloaded, and only once the rule matches an
element. The advantage they provide of reducing HTTP requests is
unnecessary with SPDY due to its multiplexing. Therefore, CSS sprites
just make it slower.
As a web developer, I have to cut a layout similar to this (example website by Ruben Bristian):
Should I bother with cutting multiple small images like a logo:
a label:
and so on? Or should I just make one big background image with all elements like this:
and make a positioned <a href> with display: block; for a linked logo?
A single image has smaller size than multiple elements altogether. What are the other pros and cons?
Use separate images.
Here are a few reasons why:
Maintenance:
It's going to be much easier to maintain in the future, if/when there comes a point when you want to build on what you already have. Furthermore (and subjectively), the background image is not critical to the design. It wouldn't look broken if parts of the background were clipped. It would look broken however, if the logo were distorted.
Bear in mind also that newer, sharper displays are being developed. It's much easier to display the standard resolution background (it's already blurry, so clarity is not essential), and maintain two versions of the logo. One for standard displays, one for HD.
Semantics: What if the user has images disabled? Sure, it's unlikely, but what about Google? You should have some proper markup with real content. Your site needs real textual content in order for Google's crawlers to gather information about it. Use CSS image-replacement techniques to build the interface.
Another note on HD displays:
It's convention to serve larger images to HD (retina) displays, and use CSS to downsize them, effectively increasing their dots-per-inch. If you use just one image, the user will have to download a considerably large image. More bandwidth used by you, and slower experience for your users.
Furthermore, the text will look horrible on HD displays. It makes much more sense to allow the browser to render razor-sharp text to the user.
Accessibility: For a start, screen readers won't have a clue what your site is about. That might not be so relevant in this case, but it's best practice to build and accessible website. If you want to include some smaller text on the site, some users may be unable to read it. Normally they would increase the font-size, but if you use images, they're powerless.
I may have over-dramatised this answer, but the advice is well-intentioned.
I would honestly try a little bit of a different approach. The "photo" part of the image would be one image, the logo another, and maybe the double bar on either side of the heading another (but might not be necessary.
I would use the photo part as a bg image on a div, and within code the rest.
I wouldn't make the text part of the image at all. Try using a service like Google Web Fonts to get a good font.
The approach will save you lots of maintenance time, and also help with performance.
PROS:
Total bytes loaded is lower.
You do not have to worry about how little images are put together to become the total image.
if you just use 1 image you will find that it will be much easier to maintain the fluidity of the layout. You will not have padding/alignment issues, rendering issues, etc. Realistically the load time should be the same either way, maybe a tad longer for multiple images as the browser would have to render more css, but i imagine it would not be very noticable. In the end it really comes down to what is better for the job. I pretty biased towards 1 clean image :)
I guess you have to think about how you are going to use each element individually, and how they are going to change in the future.
You might want to change the logo, animate it, or want to re-use it elsewhere. The background image might change, or become multiple images in some sort of transitional gallery.
If this its never going to change (unlikely), then, yes, flatten it in a single image.
I personally would have as a separate background image. Then perhaps have the logo and the label on another transparent png and utilise css sprites to re-use them throughout the site. This will halve the number of requests required to download the logo/label, and allow you to optimise each image separately ie the complex background photo, and the more simple logo/label.
I notice that the file size of CSS sprite (.gif) keep growing over the period. That is because we keep adding new icons / sprites, and we never remove the existing sprites, because we are afraid of breaking existing design (offset recalculation or the sprites may be used somewhere that we overlooked).
I wonder how do we reduce the number of sprites? The image file size keep growing and growing.
You will have to do a manual check (do a search for the sprite name first, but once you have your results you will have to use pen and paper) to realise which images are being used. You can replace those ones for the new ones without touching the positions for the rest, but before doing that I would consider:
Changing your gif to png-24 or SVG, as they weight less and have WAY better quality, specially with transparency involved. SVGs are also scalable, great for retina display devices, although not supported by all browsers (meaning IE) and therefore need an alternative.
Using different sprites for different categories of images (for example, one for menu icons, another one for social icons, etc) so it's a bit easier to manage. You would be having two or three more server requests, not a real difference.
As from my experience, you have to do that one time clean up.
And then do things right !!!
Do OOCSS and use speaking names for specific sprite images.
I would recommend reading http://devblog.xing.com/frontend/a-so-called-sprite-revolution-on-xing/
After this, administrating the sprites will be muuuuch easier, but as I said, the one time effort is need.
Also, because GIF is not the format you want to use :-)
The typical rule of thumb when it comes to using CSS sprites for images is that you should only do it for smaller images (like icons) and that actual image content should always be represented through <img> elements. My question is: why? Aren't the advantages of spriting worthwhile for content images as well?
One reason I have read is to enable the use of alt text, to be more syntactically correct and accessible to screen-readers. However, when that is a concern, couldn't you just as easily use a single tiny transparent image with all the syntactical sugar atop a sprite that presents the real visual content?
You could, but:
Content images don’t tend to be re-used as much as UI-type images like icons. Imagine a newspaper site: if every content image they used in every story was part of a sprite, that sprite would very quickly get huge, and would be downloaded even by users who only looked at one story.
Website content is generally expected to be maintained by people who don’t know CSS. It’s a bit unreasonable to expect content editors to edit a master sprite image file, re-save out to a JPG, and pop in some CSS just to put an image on a page.
If you sprite a lot of large image files, the sprite file will get really large. It might take an unacceptably long time to download when the user first visits the page, or it might use up too much bandwidth on users who only end up seeing one of the images within the sprite.
Obviously, those are generalisations — in a specific situation, it might make perfect sense to sprite larger/more content-y images.
On using an <img> tag with a tiny transparent image file for sprites, you can do that for any sprite images — it’s often useful for clipping and positioning the sprite image beyond what background-position allows.
One additional reason I can think of, is search-engines; if you have an image with a descriptive alt-tag or a figure element with a figcaption, search engines will be able to find, classify and show it.
Sprites are usually usefull for static contents (images that are common on many pages).
Content pictures often appears in only one page, so you can't add it to your sprite file.
If you want to have real-time sprite generation, making custom sprite file with all your pictures, I think the generation cost is far more expensive than the duplicated HTTP calls it saves.
Sprites are here to save HTTP requests, but you should not waste server-side computation time to make it, nor put expensive and unusefull pictures in your sprite file.
Sprites should be used for common icons across the whole website and not for page specific content. When you use sprites for big images you get a lot of white space that is wasted.
According to http://blog.vlad1.com/2009/06/22/to-sprite-or-not-to-sprite/ this is also a problem:
Another (but much less important) downside is that if a sprite-using
page is zoomed using the full-page zoom feature that’s present in many
browsers, the browser may need to do extra work to get the correct
behaviour at the edges of these images — basically, to avoid adjacent
images in the sprite from “leaking in.” This isn’t a problem for
small images, but can be a performance hit for bigger ones.
From the research I've continued to do on this, another potential issue is memory consumption. Despite the fact that sprites may be compressed enough to download quickly, the footprint they fill in the client machine's memory is after the browser has rendered them, meaning it can be quite large, even for sprites with fairly small file sizes.
I haven't seen a definitive answer on whether or not this memory footprint is any larger than what one would see when loading the same number of images without sprites. I will be testing that in the coming weeks for the project that prompted this question, so I will return and update this answer once I have a conclusion.
Sprites are used to reduce the amount of requests to a server. The impact of lots of small requests is slowing the server more than one bigger request. But if the image of sprites, I like to call it sprite-map, is too large, it will also slow down the performance. The other thing of importance is like you sad the possibility for each single picture to give some name, to manage and to index by search engine.
How do you approach the use of image sprites in css?
Should I take all the images in my website and combine them to one image sprite? Is it really that beneficial?
How hard is it to maintain those images and change them later on?
Should I take all the images in my website and combine them to one image sprite?
Of course not. You're taking it too literal.
I find sprites are best used for groups of similar images. Examples include:
All states of a graphical button
States of icons
All permutations of a background (unless it needs to tile two ways)
Is it really that beneficial?
If you have a lot of them on a busy site, very. It saves a request for each image, saving the user time and your server a whole bunch of concurrent connections.
How hard is it to maintain those images and change them later on?
If you've used them logically, pretty simple. If you need to add another navigation item, you open up your nav sprite and expand it. For things like navigation it can actually be easier to maintain because you have like comparisons right next to you in the same document.
Edit, having seen one of the more extreme examples, I'll add that I would never go that far because:
It's 60k to download. Not huge but on slow connections, that's 60k that has to be downloaded before anything shows. If all your visual assets are tied up, it can make the load time seem longer.
Your CSS becomes a nonsensical mish-mash of background-position commands. If you do want to make changes you have to go back to the sprite and measure everything. Again and again and again.
God have mercy on your soul if you need to enlarge something in the top-left of the sprite. You'd probably just add a new sprite below the current ones.
And that might lead to bloat. Indeed, just loading all these images might be loading a whole lot of material that some users will never actually see. Loading unused data is probably worse than a connection overhead (considering how easily static content can be served by multiple cheap servers or a CDN)
The other examples are a lot more simple and worthwhile (IMO).
Sprites are a great way of cutting down load-time on graphics (sometimes), and always a way of cutting down requests to the server. Generally speaking, they may take some serious planning as you don't simply want to drop a bunch of images onto a canvas and export as a jpeg. I would suggest you study some sprites currently in use by larger companies like Amazon. Get an idea for how they layout their elements, and what types of images they even consider for use in sprites.
You'll also want to evaluate your site and be sure whether you can successfully implement them or not. If you weren't planning on using them to begin with, it may require a lot of back-tracking and updating to prepare for them.
Amazon Sprite
Ebay Sprite
Current.com Sprite (Whoa)
Google
Sprites work well when you’ve got an element with at least one fixed dimension (width or height), and you want it to have a different background image in different circumstances.
When I’ve tried it, I’ve found that sprite image files tend to be smaller than the total size of the individual images files they’re made from, so you can get bandwidth savings as well as the other two benefits:
fewer HTTP requests
no delay waiting for another image to download when an image state changes on hover
That does depend on the contents of the images though.
Personally, I wouldn’t put unrelated images together in one sprite image, as I think it makes maintenance too non-obvious. Also, as mentioned in To Sprite Or Not To Sprite, really big sprite images can use quite a bit of browser memory. (Whether this is actually a bad thing depends on the context.)
The idea is to avoid unnecessary HTTP requests. This is especially an issue if you have a lot of small icons (say, for a WYSIWYG editor like the one used on this site). If you have twenty 16x16 pixel icons, that won't amount to much bandwidth, but it will still mean twenty extra requests each time the page is loaded.
Other candidates for sprites are button states and anything that's purely decorative but part of the layout.
If you use roll-over background image changes, you'll also find that you'll either have to preload the roll-over state image (either with JS or with silly hardcoding) or you'll encounter some latency as the browser requests the previously unused image. Sprites can alleviate that.
Things you probably shouldn't be making sprites of are pictures that are NOT just graphical elements (e.g. graphs, illustrations, avatars, ads) or that will change a lot (e.g. avatars or ads).
It's not impossible to change sprites, but depending on how much thought you put into the arrangement of the sprite sheet, it may be very hard to do. There's nothing forcing you to make the sprite sheet ultra-condensed, but it's obviously better for the file size if there's not much unnecessary whitespace in it (see Google).
Note that the extra requests may not be a problem for you if you have a relatively low traffic site (which almost everybody has, unless you're Google or Amazon). Sprites may still improve performance for mobile devices, though, as it means less chances for errors and thus lower latency.