In Visual studio 2008, if I run a website, then the website is running in other url. But it is running perfect in visual studio 2005.When I click the Asp.net configuration setting itself, the url is redirected into someother webserver.
I don't know where to change?
Could someone please help to solve the issue?
Not sure if this is what you need, but if you right click on the project in Solution Explorer, select properties and then web you can change the settings here for where the website should run. Do you mean that is running on a different port number than when you were running on VS 2005? Is this what you mean when you say it is running on a different server? You can set the port number on this properties page so it always runs on the same one.
Related
I must preface this post by saying that I am not an experienced developer, I am in the process of learning through trial and error and a lot of google searches so detailed (step-by-step) feedback would be greatly appreciated. I created a website, which does not use a database, using visual studio 2015 and I am attempting to host it locally on a Windows 2008 R2 server.
I installed IIS and loaded the asp.net v4.0 framework. The site works fine, produces no errors when I test it and works after being published only if the visual studio is still running.
However, when I close the Visual studio and open my browser window to http://localhost:50044 (which is the URL listed in properties menu in VS), I also tried using port :80 and nothing. When trying to add Web Site via the IIS management utility I receive the following authentication error: ”Cannot verify access path (C:\Inetpub\wwwroot).”
I checked the permissions and windows authentication is enabled with read access, and all other permissions seem to be correct. I am at a loss, I'm sure it is probably something simple that I am missing due to my lack of knowledge and experience. Any help would be appreciated.
It's sounds like you are running on IIS express which in your case stops running when you close visual studio. Normal process is create a new website in IIS and point to the folder where your web.config is. You can then hack your host file (C:\Windows\System32\drivers\etc) so DNS works. Add an entry like "127.0.0.1 mytestwebsite.com". I hope that helps
So I figured out part of what was happening. I didn't realize that visual studio has built in IIS and was using that by default.
I ran VS as an admin, created a new project, then attempted to create a virtual directory thru VS under the project/properties/web tab. I selected local IIS and entered http://localhost/boc and it returns an error: unable to create vd. Web server http://localhost... Could not be found.
I then went in to the IIS manager and set up a virtual directory with no issues. However, when I attempt to reference it thru VS I again receive an error message.
Any ideas?
I have a folder MyWebSite. I open it in Visual Studio 2010 and browse using the local webserver. It runs fine.
Now when I create a copy of the folder, open the website in Visual Studio and try to run it from there, it says:
This page can't be displayed. Make sure the web address http://localhost:21926 is correct.
What seems to be the problem?
Create a separate application pool and virtual directory for each. Your original site name is tied to a particular port because you are using the built-in server. Better to develop against IIS.
Please make sure you close Visual Studio and the instance of the ASP.Net Development server before you re-launch visual studio with the other folder.
In case you are trying to run both instances together, you might get such as error.
You could also try clearing the ASP.Net temporary folders and see if that solves the problem.
I have searched all the usual but come up empty. I must be doing something silly!
Simply I created a new project, ASP.NET Web App, and wish to use and debug it with the local install of IIS 7.5 on my Windows 7 x64 box.
According to what I have read it should be a simple process; my issue is that Visual Studio will not stop at breakpoints nor at errors etc.
I just don't get it:
Visual Studio is attaching to the w3p process for me automatically.
If I hover over the breakpoints it shows a message saying the same, that it is in the same w3p process.
I am in Administrator context. I manually ran it like so to be sure but in any case if you are an admin it runs like that anyway.
Some notes:
I do not wish to use IIS Express as I require native IIS 7.5 for my tasks, however it does debug in express - no surprise there.
As mentioned above, all this is being done locally.
The path of the virtual directory is pointed towards the project files, as set by Visual Studio 2010. It even set the Network Service as read on the folder structure.
When debugging from VS the web site runs fine, just debugging is the issue.
Maybe it is permissions? The Default App Pool is using the ApplicationPoolIdentity not Network Service... Should it be? I had assumed they we.re one and the same essentially. Although I changed this and no luck unless I didn't do something I should of
Keep in mind here that my issue is semi-unique in that I am not receiving error messages, not even in the event logs... For all intents and purposes it should be working fine, just it isn't.
VS and IIS, and all updates, are applied to date.
Note: I'm familiar with IIS7.5, I run my own public web hosting server. I just never tried to debug
Note: It is Visual Studio 2010 Ultimate
Thanks for your time.
Sigh!
I went back to basics... Uninstalled IISExpress and tested; It worked! Re-installed IISExpress; It worked!.
I guess installing IIS7 native after IISExpress did something screwy? I had ran the register ISS command on IIS7 when I installed it.
Right, so now I have both installed in tandem and they work fine. Thanks for all your help guys, appreciated.
you can try right-click on project in VS go to properties select web from left menu tab. Check if ASP.NET debugger is checked and also you can select Use Local IIS Server and give localhost url there (in project Url textbox) and then Say start debugging from VS and put breakpoints.
I had a similar issue the other day, I attached the debugger to the wrong w3p process, make sure you attach it to the one the app pool identity is running under.
I wanted to write it as comment by I don't think I can add pictures..
Are you sure you are running the same version of dll?
Is your breakpoint filled like this?
or hollow like this?
1st go to ,Program and Feature in control panel and then in that turn on or off windows features. and now check all check boxes(activate features) related to Internet Information server & windows service managers. once this is done run your visual studio as administrator and then attach to right w3p process.
My problem i sthat i have created a web application in visual studio 2008 professional edition but when i run it i have to change the specified port every time otherwise it is not woking properly i have also tried to use the assign automatic port option but the result is same. How can i make the setting to use the visual studio internal server without changing the port number every time.
You can fix the port the Visual Studio server uses in the Web tab of the project properties screen:
alt text http://philippursglove.com/stackoverflow/fixedcassiniportvs2008.png
Alternatively, if you have it installed, you could change the project to use the local IIS server, which would mean you could use a path like http://localhost/MyProject/default.aspx to get to your project - no knowledge required of what port it's running on.
I have installed Visual Studio .NET 2005. But when I am trying to execute an asp.net application then I am getting the following error:
Unable to open the Web 'http://localhost/adiii'. Could not find a Web server at 'localhost' on port 80. Please check to make sure that the Web server name is valid and your proxy settings are set correctly. If you are sure that everything is correct, the Web server may be temporarily out of service.
Click here to view screenshot of the error I am getting
Can anyone please tell me the solution of this problem. As we know there is embedded Web deployment server inside VS2005 then why its giving me this error??
It looks like when you created the project, you selected HTTP for the location instead of the default, File System. HTTP means you have an existing web server (not Visual Studio) that you want to run and test your project on (and where Visual Studio will attempt to find your source code).
Create a project and select File System to create a project on your harddrive that will be run using Visual Studio's internal web server (you can then publish/deploy the project to a real web server when you want)
Are you explicitly have defined that the internal web server should run the application on port 80?
The default behavior is that it runs on a random port.
If your settings are ok, then it might be a port conflict with another web server on your machine (Apache, IIS).
Sometimes even a Skype can okuppy port 80 and cause similar problems.
Update:
Now i see - you're using Web Site project, and we assumed you're working with Web App project instead.
In this case, the procedure is slightly different:
You select the project in Solution Explorer and open Property Pane. Here you should be able to identify two properties for the project: Port number and Use dynamic ports. I assume your first property is set to 80, and second one to false. Change the second one to true and you should be able to fix the problem.
There's a very good chance that you created the project in VS2003 and upgraded it to VS2005. VS2003 uses HTTP (a local installation of IIS for example), whereas VS2005 projects use the built-in server -- most likely, the upgraded project is still trying to use the local IIS which doesn't exist.
Do this: Right click on your project, choose "properties", and navigate to the "Web" tab on the window which pops up. You'll get a screen which allows you to choose which server you want to develop on, then make sure the buttons next to "Use Visual Studio Development Server" and "Auto-assign port" are checked.
Here's a visual reference if you need one:
http://img24.imageshack.us/my.php?image=confignw0.png
You should be be good to go now.
Visual Studio does have an embedded web server, but it never operates on port 80. Your URL clearly points to port 80.
The most likely problem is your program itself working inappropriately, but without code I can't help much more.