I have a button on an ascx control that calls a method on the onClick event:
<asp:Button id="bUpdateText" onClick="FUpdate" ValidationGroup="Update" CausesValidation="False" Text="Update" cssclass="button" runat="server" />
Normally I use this control on it's own page and the button works. This time round however, I am loading this control into a Div that is present on the home page of my site (that way I can show the contents with a little bit of JQuery). However, when I bring the control in this way, the onClick event doesn't fire and I am not sure what could cause that.
Sorry I don't have any code sample but the nature of the site makes it difficult to provide any that would make sense.
In short, what would stop this event firing now?
p.s I have tried adding validation groups to all other buttons and validation controls on the page and there is only ONE form present on the page.
EDIT: I have only just added the validation stuff in to see if that does anything. By default it has been like this and still didn't work:
<asp:Button id="bUpdateText" onClick="FUpdate" Text="Update" cssclass="button" runat="server" />
As mentioned as well, this works when I use this control on it's own page (loaded directly into Default.aspx) so I don't think the case of onClick matters.
EDIT2: I have just noticed that when I click this button, other validation controls on my page are being triggered even though they have their own DIFFERENT validation group?! Taking these controls out doesn't help though.
Thanks.
I have found out what is causing the issue.
This control that I am now including is called on the Page_Finalize() and I am guessing that by this point the viewstate has forgotten it needs to do anything. Loading this control on the page load sorts it out.
Thanks for looking.
To start, if you set the 'causesValidation' property to false, you do not need a validation group.
Additionally, I believe that ASP cares about case when dealing with the OnClick command.
i.e. it should be OnClick not onClick
Yeah, annoying and small, but that might be your problem
You can use Firebug to see what happen in Update validationGroup. it looks like your page execute only client-side button click because of Update validationGroup.
Related
Hi everybody i have the next problem. I have to set a button as default when i press Enter. I can use DefaultButton in the Form because now all my pages inherits from Master Page and i have a Content from the Master Page and this isn't work. Somebody could give me any alternative to solve this please. Thanks
According to Enter Key - Default Submit Button:
ASP.NET 2.0 introduces a wonderful work around for this. By simply
specifying the "defaultbutton" property to the ID of the ,
whose event you want to fire, your job is done.
The defaultbutton property can be specified at the Form level in the
form tag as well as at panel level in the definition tag.
The form level setting is overridden when specified at the panel
level, for those controls that are inside the panel.
Also, the Event Handler for the specified button, fires thereby
simulating a true submit button functionality.
Like this
<form id="form1" runat="server" defaultbutton="Button1">
<div>
<asp:Button ID="Button1" runat="server" Text="Button1" OnClick="Button1_Click" />
</div>
Or you can achieve this by
Page.Form.DefaultButton = crtlLoginUserLogin.FindControl("LoginButton").UniqueID
or just
Page.Form.DefaultButton = LoginButton.UniqueID
This will work.
One way is through to recursively search through all your child pages controls and find the first button, get the id and set the default button of your form.
Although I have never tried this, I dont think its a very good idea as it is slow and error prone.
An alternative may be to do it through javascript/jquery, see this answer:
Submit form with Enter key without submit button?
I have a form that currently uses an control to submit a form. Everything works perfectly. So now the new requirement is for the "submit' button to be a link. Changing it to a LinkButton control, without changing a SINGLE other thing, breaks the validation.
There is a bit too much code to post in a SO question and I know there's a bit of a lack of detail here, but is there any reason why a LinkButton wouldn't fire ASP.NET validation the same way a Button control would? In theory, they should both operate exactly the same, no?
The current submit button:
<asp:Button ID="btnSubmit" TabIndex="9" Text="Send" ValidationGroup="Forward" runat="server" />
The new submit button:
<asp:LinkButton ID="btnSubmit" TabIndex="9" Text="Send" ValidationGroup="Forward" runat="server" />
The Link button should fires the validation the same way a normal button does, my concerns in your case would be the following:
make sure these is nothing in the server side code stopping this.
make sure in the javascript code there is nothing stopping the "
ASP.NET controls that fire validation has a property called CauseValidation
Be sure all controls should fire validation, has this property set to True
Add attribute CauseValidation="True" to your control but if you want to fire this at particular line at code behind you can use validate the form by the following code:
FormID.Validate();
I know this is old but it has never answered. Did your validator have a "controlTovalidate"? Currently it would appear as if the validator was not firing but in reality it is. It just does not have anything that it is 'watching'. Hope if anyone reaches this thread that this helps even if it is just a little bit.
I was unable to determine the cause of this issue but was able to solve it:
I set the CausesValidation="false" and added at the top of the onclick event this.Validate(linkButton.ValidationGroup) this allows the event to get to the code behind and validation to occur.
I have a back and next button in that there is a OnClientClick validation function.
This function is not called when i click on that, Please help me
Code has given below:
<asp:Button ID="btn_view1_back" runat="server" Text="Back"
CausesValidation="False" ValidationGroup="Form2" />
<asp:Button ID="btn_View1_Next" runat="server" CausesValidation="true" Text="Next"
ValidationGroup="Form2" OnClientClick="return ValidateDropDown();"
UseSubmitBehavior ="true" />
Just to be sure: ValidateDropDown has been defined in the JavaScript, right? OnClientClick is what is executed on the client side, i.e. the javascript.
The other thing might be that the syntax for OnClientClick might need to be different, such as: OnClientClick="ValidateDropDown()"
Your question is a little unclear on which function isn't firing (the JS OnClientClick or the server-side OnClick), but if it's the server-side, make sure ValidateDropDown() is returning true. If it returns false or null or something, the server method won't fire.
Can you post your code for ValidateDropDown? Have you verified that it's firing?
The back button is set not to cause validation, and doesn't have an OnClientClick action defined.
Make sure that the validation is not firing. It can be that validation is firing and you are not able to see the Text or ErrorMessage since it is blank by default.
Your ValidateDropDown method is probably throwing an exception, which causes the postback to happen anyway.
Can you post the contents of that method?
Alternatively, use Firebug and check Break on all script errors in the debug menu.
Also, the OnClientClick code runs in the browser, and the method that it calls must be defined in Javascript, not VB.
You have a breakpoint in your validate function and it's not getting hit? Or you think it's not getting hit because your page is posting back anyway?
I would expect that ValidateDropDown function to get called, but I'm not sure. However, I also don't think it matters. I don't think it matters because it appears you are looking to prevent a postback and this isn't the way to do that. Are you looking to prevent a postback?
If so, I think the best thing to do here is to ditch the button's OnClientClick and instead add a CustomValidator control for your dropdroplist and then set the ClientValidationFunction to "ValidateDropDown". There's already an asp.net client side validation framework, so I'd just build on that.
But I'm just some idiot from the internet, I barely read your question and my reputation is 16, so I definitely wouldn't listen to me.
I have 3 different kinds of ajax popups that need to exist across my site. I was hoping that I could simply create a user control for each one and place the panel and modal popup extender inside each one but this doesn't seem to be working. Has anyone tried this before or do you have a recommendation as to how I can avoid duplicate code for each pop up on different pages? Thanks!
Ah I figured out my issue with the User Control I believe.
The ModalPopUpExtender requires the TargetID property to be set otherwise an error occurs. Since this is sitting in a UserControl I just created a dummy link button that doesn't do anything and I set the property visible to false.
<asp:LinkButton ID="lnkBlank" runat="server" Visible="false" />
<asp:Panel ID="plContainer" style="display: none;" runat="server">
Hello?
</asp:Panel>
<cc1:ModalPopupExtender ID="mpe" runat="server"
BehaviorID="test"
TargetControlID="lnkBlank"
PopupControlID="plContainer" />
Apparently it doesn't appreciate that and the moment I set the visible property to true it started working. Not sure what the reasoning is for a TargetID since, I would think, most pop ups could be called from multiple links about the page. Perhaps I'm still not entirely clear on how this control is supposed to be used.
One option would be to write the popups in a asp.net user control (a .ascx page) and include that on the pages you need the popups. Have a public method in the ascx page that will show the popup, and call it from the parent page when you need to. If you already have a script manager on the parent page, you can't have a second one in the ascx page, but other then that there shouldn't be anything that would stop this from working. Hope this helps!
edit: here's what my modal popup extender control looks like...
<cc1:ModalPopupExtender
ID="mpeClassroom"
BackgroundCssCLass="modalBackground"
runat="server"
CancelControlID="lbClose"
OnOkScript="onOk()"
TargetControlID="Button1"
PopupControlID="pnlClassroom">
</cc1:ModalPopupExtender>
in my code behind page, my method just calls mpeClassroom.Show();
The problem with hidden link as TrgetControlID is that; when u set its visibility as false, server doesn't render it as well. PopExtender then cannot find control on the page.
Instead of setting its visibility to false, try to apply a style with display:none. This should work !
I have a gridview that is within an updatepanel for a modal popup I have on a page.
The issue is that the entire page refreshes every time I click an imagebutton that is within my gridview. This causes my entire page to load and since I have grayed out the rest of the page so that the user cannot click on it this is very annoying.
Does any one know what I am missing.
Edit: I entered a better solution at the bottom
Make sure you have the following set on the UpdatePanel:
ChildrenAsTriggers=false and UpdateMode=Conditional
do you have ChildrenAsTriggers="false" on the UpdatePanel?
Are there any javascript errors on the page?
I had this problem and came across the following article:
http://bloggingabout.net/blogs/rick/archive/2008/04/02/linkbutton-inside-updatepanel-results-in-full-postback-updatepanel-not-triggered.aspx
My button wasn't dynamically created in the code like in this example, but when I checked the code in the aspx sure enough it was missing an ID property. On adding the ID the postback became asynchronous and started to behave as expected.
So, in summary, check your button has an ID!
Are you testing in Firefox or IE? We have a similar issue where the entire page refreshes in Firefox (but not IE). To get around it we use a hidden asp:button with the useSubmitBehavior="false" set.
<asp:Button ID="btnRefresh" runat="server" OnClick="btnRefresh_Click" Style="display: none" UseSubmitBehavior="false" />
Several months later this problem was fixed. The project I was working in was a previous v1.1 which was converted with 2.0. However, in the web.config this line remained:
<xhtmlConformance mode="Legacy"/>
When it was commented out all of the bugs that we seemed to have with the ajax control toolkit disappeared
Is the Modal Window popped up using the IE Modal window? Or is it a DIV that you are showing?
If it is an IE Modal Pop up you need to ensure you have
<base target="_self" />
To make sure the post back are to the modal page.
If it is a DIV make sure you have your XHTML correct or it might not know what to update.
I would leave the onClick and set it as the trigger for the updatePanel.
That's odd that it works in FF and not IE. That is opposite from the behavior we experience.
UpdatePanels can be sensitive to malformed HTML. Do a View Source from your browser and run it through something like the W3C validator to look for anything weird (unclosed div or table being the usual suspects)
If you use Firefox, there's a HTML validator Extension/AddOn available that works quite nicely.
For reference..
I've also noticed, when using the dreaded <asp:UpdatePanel ... /> and <asp:LinkButton ... />, that as well as UpdateMode="Conditional" on the UpdatePanel the following other changes are required:
ViewStateMode="Enabled" is required on <asp:Content ... /> (I've set it to Disabled in the MasterPage)
ClientIDMode="Static" had to be removed from <%# Page ... />
To prevent post-backs add return false to the onclick event.
button.attribute.add("onclick","return false;");
Sample:
string PopupURL = Common.GetAppPopupPath() + "Popups/StockChart.aspx?s=" + symbol;
hlLargeChart.Attributes.Add("onclick", String.Format("ShowPopupStdControls(PCStockChartWindow,'{0}');return false;", PopupURL));