First of all thanks for taking the time to read my question. Here is what I am trying to accomplish followed by what I have so far on this.
What I want to do is create a Windows application (or server of sorts) that would listen for requests from an ASP.NET application. The windows application would be installed and would listen for messages from ASP.NET application and then do some processing. The flow is like this:
A user downloads the desktop application and registers their IP address on my web site. After downloading the desktop app, the ASP.NET application can then send requests to that particular desktop client for further processing. I think further processing is independent of the resolution in this case that's why i have skipped over details on what processing would be done. But if you think it is important, please let me know and I will add those details as well.
I have looked into creating a TCP server that would listen for requests. Because the user has already registered their IP address on my web site, my web site assigns them a unique identifier and stores the ID alongwith IP address in database. Now, the ASP.NET site can send requests to that desktop application.
I have looked into creating a TCP server for this purpose. While researching I also came across PNRP and it seems something like what I am trying to do.
Can you guys recommend some solutions or where I should be looking at for this scenario? Should I create a simple TCPLISTENER or may be go with PNRP approach? Or something else?
The basic requirement is for a web application to be able to communicate with a desktop application. The web application would be servicing numerous users and each user would have a desktop application installed. Which user for which desktop client question would be addressed by the web application that would maintain a database of unique user id's and their corresponding IP Address.
Thanks in advance for your help.
You could use .NET remoting or a web-service in the desktop app. Use WCF or WSE for the latter. You can use COM to add windows firwall rules.
Whatever you do, take firewalling/NAT into account. It might be easier for the client application to poll the server (initiate the connection) otherwise you open a can of worms by trying to have a remotely-accessible server in your user's computer without having to do some very manual configurations on the user's networking equipment.
Once you have that part sorted out, what I used in your situation was .NET Remoting. At the time WCF had not come out and when it did it was to crippled for my needs. TCP IP sockets were too raw (I had to write too much code) and so Remoting solved my problem ideally (a hand full lines of code to set up the connection, and everything was automatic from there on).
EDIT: I use an excellent third party library that makes Remoting even more flexible (flexible enough that I am still waiting for WCF to catch up with the featureset so that I stop using Remoting, and no luck yet!). Check out http://www.genuinechannels.com/ to see all the features they have. It includes making calls from server to client, and that sounds exactly like what you need to do. Check it out.
Related
I want to create a program for my desktop and an app for my android. Both of them will do the same, just on those different devices. They will be something like personal assistants, so I want to put a lot of data into them ( for example contacts, notes and a huge lot of other stuff). All of this data should be saved on a server (at least for the beginning I will use my own Ubuntu server at home).
For the android app I will obviously use java and the database on the server will be a MySQL database, because that's the database I have used for everything. The Windows program will most likely be written in of these languages: Java, C#c C++, as these are the languages I am able to use quite well.
Now to the problem/question: The server should have a good backend which will be communicating with the apps/programs and read/write data in the database, manage the users and all that stuff. But I am not sure how I should approach programming the backend and the "network communication" itself. I would really like to have some relatively easy way to send secured messages between server and clients, but I have no experience in that matter. I do have programming experience in general, but not with backend and network programming.
side notes:
I would like to "scale big". At first this system will only be used by me, but it may be opened to more people or even sold.
Also I would really like to a (partly) self programmed backend on the server, because I could very well use this for a lot of other stuff, like some automation features in my house, which will be implemented.
EDIT: I would like to be able to scale big. I don't need support for hundreds of people at the beginning ;)
You need to research Socket programming. They provide relatively easy, secured network communication. Essentially, you will create some sort of connection or socket listener on your server. The clients will create Sockets, initialize them to connect to a certain IP address and port number, and then connect. Once the server receives these connections, the server creates a Socket for that specific connection, and the two sockets can communicate back and forth.
If you want your server to be able to handle multiple clients, I suggest creating a new Thread every time the server receives a connection, and that Thread will be dedicated to that specific client connection. Having a multi-threaded server where each client has its own dedicated Thread is a good starting point for an efficient server.
Here are some good C# examples of Socket clients and servers: https://msdn.microsoft.com/en-us/library/w89fhyex(v=vs.110).aspx
As a side note, you can also write Android apps in C# with Xamarin. If you did your desktop program and Android app both in C#, you'd be able to write most of the code once and share it between the two apps easily.
I suggest you start learning socket programming by creating very simple client and server applications in order to grasp how they will be communicating in your larger project. Once you can grasp the communication procedures well enough, start designing your larger project.
But I am not sure how I should approach programming the backend and
the "network communication" itself.
Traditionally, a server for your case would be a web server exposing REST API (JSON). All clients need to do http requests and render/parse JSON. REST API is mapped to database calls and exposes some data model. If it was in Java, it would be Jetty web server, Jackson Json parser.
I would really like to have some relatively easy way to send secured
messages between server and clients,
Sending HTTP requests probably the easiest way to communicate with a service. Having it secured is a matter of enabling HTTPS on the server side and implementing some user access authentication and action authorization. Enabling HTTPS with Jetty for Java will require few lines of code. Authentication is usually done via OAuth2 technique, and authorization could be based on ACL. You may go beyond of this and enable encryption of data at rest and employ other practices.
I would like to "scale big". At first this system will only be used by
me, but it may be opened to more people or even sold.
I would like to be able to scale big. I don't need support for
hundreds of people at the beginning
I anticipate scalability can become the main challenge. Depending on how far you want to scale, you may need to go to distributed (Big Data) databases and distributed serving and messaging layers.
Also I would really like to a (partly) self programmed backend on the
server, because I could very well use this for a lot of other stuff,
like some automation features in my house, which will be implemented.
I am not sure what you mean self-programmed. Usually a backend encapsulates some application specific business logic.
It could be a piece of logic between your database and http transport layer.
In more complicated scenario your logic can be put into asynchronous service behind the backend, so the service can do it's job without blocking clients' requests.
And in the most (probably) complicated scenario your backend may do machine learning (for example, if you would like you software stack to learn your home-being habits and automate house accordingly to your expectations without actually coding this automation)
but I have no experience in that matter. I do have programming
experience in general, but not with backend and network programming.
If you can code, writing a backend is not very hard problem. There are a lot of resources. However, you would need time (or money) to learn and to do it, what may distract you from the development of your applications or you may enjoy it.
The alternative to in-house developed of a backend could be a Backend-as-a-Service (BaaS) in cloud or on premises. There are number of product in this market. BaaS will allow you to eliminate the development of the backend entirely (or close to this). At minimum it should do:
REST API to data storage with configurable data model,
security,
scalability,
custom business-logic
Disclaimer: I am a member of webintrinsics.io team, which is a Backend-as-a-Service. Check our website and contact if you need to, we will be able to work with you and help you either with BaaS or with guiding you towards some useful resources.
Good luck with your work!
I have an existing application (WPF) that monitors OPC Servers and alarms. There is a requirement for this to be accessible via a browser so that users can view the status of alarms etc remotely. I'm feeling out of my depth (I'm not a Web developer) and I just need some advice on the best technology to accomplish this.
I've written several WCF Services, but all these have done is, via a function call, crunch some data sending back a result.
This 'service' will have to be persistent and able to be interrogated by x number of clients. For example, a client will need to be able to connect, stay connected and be informed of events as an when they happen. This has been a major problem in the past when I've developed WCF services (channel faults etc) and I've learnt to only keep a connection open for as long as it's needed. Is a WCF Service the best option in this case (as opposed to a normal Window's Service)
I need to be able to 'push' information from the service to clients. So, someone navigates to a webpage, the page shows in realtime, what is happening in the service. Do I need to use timers since this could be big problem if session state cannot be maintained.
I've read about Observer Design Pattern, but can this be implemented in ASP.net and how would ASP connect (and remain connected) to a remote windows service? Again, do I have to resort to timers?
I apologise it this appears vague, but the situation boils down to the following:
A process that's continually running (somewhere), receiving connections from remote clients (desktop/web), and then keeping the clients informed as events (alarms going off etc) occur.
I would like to write an application to manage files, directories and processes on hundreds of remote PCs. There are measurement programs running on these machines, which are currently managed manually using TightVNC / RealVNC. Since the number of machines is large (and increasing) there is a need for automatic management. The plan is that our operators would get a scriptable client application, from which they could send queries and commands to server applications running on each remote PC.
For the communication, I would like to use a TCP-based custom protocol, but it is administratively complicated and would take very long to open pinholes in every firewall in the way. Fortunately, there is a program with a built-in TinyWeb-based custom web server running on every remote PC, and port 80 is opened in every firewall. These web servers serve requests coming from a central server, by starting a CGI program, which loads and sends back parts of the log files of measurement programs.
So the plan is to write a CGI program, and communicate with it from the clients through HTTP (using GET and POST). Although (most of) the remote PCs are inside the corporate intranet, they are scattered all over the country, I would like to secure the communication. It would not be wise to send commands, which manipulate files and processes, in plain text. Unfortunately the program which contains the web server cannot be touched, so I cannot simply prepare it for HTTPS. I can only implement the security layer in the client and in the CGI program. What should I do?
I have read all similar questions in SO, but I am still not sure what to do in this specific situation. Thank you for your help.
There are several webshells but as far as I can see ( http://www-personal.umich.edu/~mressl/webshell/features.html ) they run on the top of an existing SSL/TLS layer.
There is also S-HTTP.
There are several ways of authenticating to an server (username/passwort) in a protected way, without SSL. http://www.switchonthecode.com/tutorials/secure-authentication-without-ssl-using-javascript . But these solutions are focused only on sending a username/password to the server.
Would it be possible to implement something like message-level security in SOAP/WS-Security? I realise this might be a bit heavy duty and complicated to implement, but at least it is
standardised
definitely secure
possibly supported by some libraries or frameworks you could use
suitable for HTTP
I need to find the most efficient way to communicate from an asp.net web server and a windows C++ application. The windows application does not have any permission to access the database of the asp.net web server.
When the user presses a button, that action with some bytes should be received by the C++ application.
In return, after processing the data on the C++ application, it will send back the result to the web server.
The only way I can think of at the moment is as following:
The asp.net web server will have two web service methods:
the C++ application will call that web service for a method for an interval. if there is a change, then the C++ application will process.
after the C++ application finished its process, it will call a method on that web service to inform about the result.
Any other ways to solve this kind of communication?
Thanks in advance.
If the C++ Application is also on Windows, named pipes would be a good solution. They can be configured to be durable so they can queue messages if either side is not ready to receive the message and they are quite easy to use. They basically look like files that you can read or write from and the data appears on the other side of the "pipe".
Take a look at the documentation (C++) here: http://msdn.microsoft.com/en-us/library/aa365781(v=VS.85).aspx
On the ASP.NET side you would use .NET API's. Here's a nice example to get you started: http://msdn.microsoft.com/en-us/library/bb546085.aspx (This example includes both client and server code.)
Named pipes would be a great solution if the C++ application is located in the same physical server as the ASP.NET application. In that case the OS would be just moving memory between processes for you so it could be very quick.
Additionally, I would configure the C++ Application as a Windows Service so it's always available and can be restarted when the server it's running on is restarted. If keeping it running is very important you could integrate Performance Counters and then have your ops team monitor the counters to make sure it is operating within expected thresholds.
The C++ application can also make a simple GET or POST request with enough information that the webserver can handle in case you don't want to expose a webservice.
You could use network sockets. It's been a long time since I have done anything with them so I can't be much help. Research Winsock (aka Windows Sockets API).
You could use WCF services and connect to them using your C++ client. You will have to research consuming WCF services from C++ client.
As #parapura suggested you could use simple HTTPRequest get & post methods. You could create your own http handler for these request to customize the response.
As you suggested you could use simple web services.
I am building an ASP.NET website which will collect data from a user and submit it to a 3rd party webservice. The webservice is somewhat unreliable and for this reason there is a backup service.
If a call to the primary service fails (timeout or some other error) then I need to flip a bit in a static class which will trip the system to use the secondary service.
At this point, I need to start polling the primary service (with dummy data) to see if it is back up (at which point I will receive an OK code in return). At this point I need to flip the bit back so that the website starts using the primary service again.
I've had a read of this Should I use a Windows Service or an ASP.NET Background Thread? and I think that separating out the code into a Windows Service would be the cleanest method of performing the polling, but then how would I communicate with the web appication.
One thought I've had is to expose a webservice that the Windows Service could use to communicate into the webapp but this seems both messy and over-kill.
I'd appreciate your thoughts and experiences performing similar tasks.
Thanks
I think the Windows service is the way to go, definitely.
As for the communication between the service and your web site, the best answer depends on the size and scale of your solution. If you are building something that needs to be reliable, I'd suggest you implement some sort of queue between your ASP.NET site and your Windows service. You have a lot of options here too, depending on budget and ability: BizTalk, MSMQ, and SQL Server queues (SSIS). Alternatively if you are looking for something smaller scale, I'd recommend you just stick it into a database table somewhere.
I would avoid using files on the file system because you will encounter issues with file locks and multithreading. I would also avoid directly communicating with the service because you risk losing the in-memory queue if the service fails for any reason.
Edited to add:
If reliability isn't a concern here, you could use a WPF named-pipes hosted service for communication between your website and your Windows service. This avoids much of the overheads normally involved in classic Web Services and is surprisingly quick. The only down-side is that self-hosting a WPF service is tricky and can be difficult to keep the service up.