Can anybody please tell me the registry setting(s) that are affected in Windows Mobile 6.1 when a user selects Start -> Settings -> Connections -> Wi-Fi and then changes the value of the "My network card connects to" drop down list on the "Network Adapters" tab?
I have a device that seems to default this to "The Internet" when in fact the Wi-Fi connects to the corporate network and I would like to be able to change this programatically rather than expecting 250+ users to have to do it manually every time they reboot their devices.
Thanks.
I'm not certain that it is a registry change, but if it is, it's easy to determine.
Use the remote registry editor and attach to the device
Save the entire registry to a file
Change the network settings
Save the registry again
Use your favorite diff program to compare the two files
I think you should be able to change this setting using provisioning xml, either via DMProcessConfigXML api, or by making a setup cpf with the xml in it and running it on the device. This post details how to build the xml into a cpf.
The CSP you would be interested in is the Wifi CSP
The 'Work Network' and 'The Internet' are metanetworks that are specified in the xml by guid, usually in the DestId parm. My answer to this question details the xml you can use to pass to DMProcessConfigXML to read the settings on the device to see what they are. Then you can build some xml to just set the right setting. I suspect that you would just need to set the DestId parm of the appropriate wifi entry to the 'Work Network' guid.
According to my registry comparison on WM5 (HTC Touch HD), corroborated by values in http://msdn.microsoft.com/en-us/library/bb737539%28v=MSDN.10%29.aspx, this setting is specified in the registry key:
HKEY_LOCAL_MACHINE\ControlPanel\WiFi\Ethernet\DestID.
"{436EF144-B4FB-4863-A041-8F905A62C572}" (default) The Internet
"{A1182988-0D73-439e-87AD-2A5B369F808B}" Work
I also tried a CE2003 device (Motorola MC50), but couldn’t detect any registry changes. The key above does not exist in the registry on this device.
Related
My apps using bonjour service to conversation with each other via local network.
I am facing a problem on Xcode12 with OS14 device.
A device publish a service with server type name depends on self device IP address
(example: 192.168.33.20 -> _1921683320._tcp)
B device searching a service with service type depends on A device IP address
(example: _1921683320._tcp)
According to apple document..From OS14~
https://developer.apple.com/documentation/multipeerconnectivity
Important
Apps that use the local network must provide a usage string in their Info.plist with the key NSLocalNetworkUsageDescription. Apps that use Bonjour must also declare the services they browse, using the NSBonjourServices key.
because my service type name is named by local network ip, it is changeable base on local network setting, so I am thinking about to using wildcard to define the service type name.
example: _*._tcp
but seems wildcard is not available on this definition.(I tried it)
I am also thinking about changing the naming method on A device
(example: 192.168.33.20 -> _20._tcp)
and add _1.tcp ~ _255.tcp to info-plist
But if I changed the naming method, B device could not find A device until version up.
Any idea for this problem? Please help.
I'm currently working through the same issue - Bonjour service name is dynamically created based off the iPad name to form a local mesh network. The conclusion that I have came to is com.apple.developer.networking.multicast is required for this to function without completely overhauling how all that logic is done. (More info here)
You will have to request permission from apple by filling out a form here. Let me know if this works for you!
The thing I am finding is, you "might" not be able to use a wildcard, but you can put multiple entries in the plist:
Item 0 _multicastapp0-p._tcp
Item 1 _multicastapp1-p._tcp
Item 2 _multicastapp2-p._tcp
Item 3 _multicastapp3-p._tcp
etc
Item N _multicastappN-p._tcp
So for some reason if you are trying to have multiple "Groups" of 8 or have a device have it's own "collection" i.e. be a server and have 3 devices connect to that, you can.
I haven't "fully" tested but I am going to be doing this in my apps, I did test using multiple keys tho, but not fully, no errors...
My place of business currently uses Reflection for Unix and OpenVMS to handle a database of customers. I access this database directly through the Reflection emulation. The only way to get data out of Reflection is to navigate to a single customer via keyboard input and print the information to a .txt.
Is there anyway I can access the VM other than through Reflection with the end goal of automating retrieval of customer information from a Java script executed outside of the Reflection environment? This is the information I can gather via the Reflection interface about what I am connecting to:
At the bottom of the Reflection interface - VT500-7 -- HOST_NAME via SECURE SHELL
Via the Connection Setup drop-down:
Host name: HOST_NAME
SSH config scheme: AutoKeyLogin
User name: username
Via the Security... button:
General tab:
Port number: 22
User Authentication: [x] Public Key
[x] Password
User Keys tab:
Use Name Type Location
[x] username1user DSA C:\Documents\PathToSSHKey\.ssh
Host Keys tab:
Host Type Fingerprint
HOST_NAME, 111.1.111.11, 22 DSA 39:14:f3:123:fds:restOfFingerprint
There is more information available if the solution is possible but I have just not provided enough to solve it, so please ask.
Given that I have the host name, port, .ssh, and host key, is it possible to connect to and read from the VM that I am otherwise connecting to normally via the Reflection emulator?
NO. Reflection (other example is PuTTY) is just a dumb-terminal emulator, here using the (secure) SSH protocol to connect to some Operating System. From the information provided we cannot even tell which OS. Maybe OpenVMS maybe some Unix. Most certainly not a 'VM', but a physical box. Maybe a Alpha, Integrity, Sun, IBM or Intel server.
IF, big if, it is OpenVMS you would possibly see something like this flash by on entry:
XXX - HP rx2600 (1.50GHz/6.0MB) OpenVMS IA64 V8.3-1H1
Last interactive login on Thursday, 7-DEC-2017 13:23:19.83
Last non-interactive login on Wednesday, 6-DEC-2017 12:35:45.80
Most likely username uses is set up to always start a (shell) script which starts a menu from which a program is activated, which knows how to access data record. IF is it OpenVMS then the actual data is likely stored in RMS (indexed) files, but it could in a proper (Oracle RDB or RDBMS) database.
If bulk access to the data is needed then you need to talk to the system/application manager for the system 'HOST_NAME' and ask them about the application and its database.
You may find that there is FTP, ODBC or JDBC or natice DB (OCI?) access to the data avaiable already, or that this can be requested. Likely tools in this space are ConnX, Attunity Connect, and such.
First you'll need to find out which OS/Platform/Version, which application (3rd party? home grown? 4GL? Cobol? Basic? and ultimately, which database/storage method.
That's not to say that some terminal emulator cannot be 'tricked' (google -
screen scraping) to be programmed to fetch a series of data on command, but that will always be error prone and laboriously for limited volumes.
You are better of trying to get proper data access.
Good luck! You'll need some.
Hein
so i have the current code:
strconnectstring="http://camuser:mf#192.168.0."&strip&":"&strport&"/image/jpeg.cgi?profileid=1"
so the link provides the password(mf) and user(camuser)
the problem is that it works fine in chrome and firefox but in internet explorer it doesn't seem to work at all. any tips?
i tried to do it without any passwords but it keeps asking the password and you can't save it, it's not really possible to save all passwords on all the useraccounts.
thanks in advance!
just had to change the register to allow the user:password method again
To disable the new default behavior in Windows Explorer and Internet Explorer, create iexplore.exe and explorer.exe DWORD values in one of the following registry keys and set their value data to 0.
• For all users of the program, set the value in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE
• For the current user of the program only, set the value in the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_HTTP_USERNAME_PASSWORD_DISABLE
I am getting this error while connecting to IBM MQ. I know that this is because of privileges, but is there any way just to check the connection with IBM MQ?
Please suggest.
The 2035 suggests that your connection is getting to the QMgr. If you had the wrong channel name, host or port you would get back a 2059. The 2035 means that the connection made it to the listener, found a channel of the name that was requested and attempted a connection.
If you want to test past this point it will be necessary to either authorize the ID that you are using to connect or to put an authorized ID in the MCAUSER attribute of the channel.
For a detailed explanation of how the WMQ security works on client channels, see the WMQ Base Hardening presentation at http://t-rob.net/links.
If you enable authorization messages then the 2035 will show up in the event queue. Then you can look at the message and see what ID was used to connect and what options were used too. The 2035 might be because you asked for set authority on the queue manager or something else you aren't supposed to have. The authorization messages wil show you that.
You can also resolve this By setting mcauser('mqm') .. i was able to overcome 2035 error.
Define channel (channel1) chltype (svrconn) trptype (tcp) mcauser(‘mqm’)
Esp thanx to my SENIOR Bilal Ahmad (PSE)
You have to check the privileges with an MQ administrator.
You can use dspmqaut to check the grant.
Below is the sample to give user poc access to Queue Manager QM1 and Queue LQ1
# check the access right of user POC to QM1
dspmqaut -m QM1 -n LQ1 -t q -p poc
# if you want to give access, you should use
setmqaut -m QM1 -n LQ1 -t q -p poc <access Types>
# eg (put everything - in the real live scenario, choose only what you want to grant) :
setmqaut -m QM1 -n LQ1 -t q -p poc +put +get +browse +inq +set +crt +dlt +chg +dsp +passid +setid +setall +clr
Then dont forget to restart QM1 with
endmqm -i QM1
strmqm QM1
Finally, you should be able to proceed without error 2035.
I have been struggling with this for ages too. Eventually I found this solution. (If you can call turning off authentication a solution.)
I am using version
- IBM Websphere 9.1.0.201807091223
From IBM's website they advise turning connection authentication off!!!
Resolving the problem Disable channel authentication
You will need to disable connection authentication, at least
temporarily. There are known issues in FTM for Check with regard to
using MQ connection authorization. These problems are actively being
addressed and fixes will appear in a future fix pack. The target is
fixpack 3.0.0.8.
Steps to disable connection authentication: Open MQ command console
and type runmqsc ALTER
AUTHINFO(SYSTEM.DEFAULT.AUTHINFO.IDPWOS) AUTHTYPE(IDPWOS)
CHCKCLNT(NONE) CHCKLOCL(NONE) Restart the queue manager for this
change to take effect.
Source http://www-01.ibm.com/support/docview.wss?uid=swg21962081
On this topic if you are using MQSeries 9.1 in a test or development environment you can disable channel authentication with the following approach :
. Launch MQ command line utility with the following :
runmqsc (for example runmqsc QM1)
. Disable authentication for all channels with the following command
ALTER QMGR CHLAUTH (DISABLED)
For a Q/Q-manager running on Windows, you may have to create the user on the Q/Q-manager machine [i.e. create a user on the Q-machine to match the user on the Q-client machine], and then add that user to the 'mqm' group on that machine.
Steps:
Ensure that the domain user that is being used to create the Q CLIENT [i.e. the user that the Q-client app is running under] also exists on the box with the Q/Q-manager. You may be able to just create a local user on the Q/Q-manager box [, or you may have to do some more complicated creation of an Active Directory user - I can't help you there].
On the Q/Q-manager box, add the user you have just created [or the existing one, if it already exists] to the mqm group. [On a Windows server box you will need to use the Microsoft Management Console (1. 'mmc' from the command line, 2. File > Add/Remove SnapOn > Local Users & Groups, 3. add user to group)]. The 'mqm' group should already exist on the Q/Q-manager machine.
Error MQRC 2035 basically means that your application has been able to connect to the queue manager, however due to certain absence of permissions/authorizations, it was unable to put/get/publish/subscribe messages.
To resolve this, at first, try these steps in order to disable the authorizations from queue manager and channel. Use this only if it isn't a production queue manager.
Always check the queue manager logs. It tells you exactly where you need to look into, and resolve the issue.
In this case, generally, you can issue the following commands after doing a runmqsc on the queue manager :
ALTER QMGR CHLAUTH(DISABLED)
Then set the chckclnt object(under authinfo) to optional
DISPLAY QMGR CONNAUTH
DISPLAY AUTHINFO(name-from-above) ALL //name from the first commands
ALTER AUTHINFO(name-from-above) AUTHTYPE(IDPWOS) ADOPTCTX(YES)
ALTER AUTHINFO(name-from-above) AUTHTYPE(IDPWOS) CHCKCLNT(OPTIONAL)
REFRESH SECURITY TYPE(CONNAUTH)
SET CHLAUTH('*') TYPE(BLOCKUSER) ACTION(REMOVEALL)
This helps remove any blocks that the channel is creating against any user.
SET CHLAUTH(your channel name) TYPE(ADDRESSMAP) ADDRESS('*') USERSRC(CHANNEL)
This should resolve your issue, since we have disabled every authorization that an application has to pass in order to do anything on a queue manager.
Now, in case you are using a production queue manager, NEVER remove authorizations.
Go, and right click on any QM that you have configured in your MQ explorer. Go to the QM authority, and authority records. Click on create new user, and give the same name as the username your application is using. Select all the checkboxes, then copy from the space below all the commands that are given. Namely, setmqaut. Edit with your queue manager name, and issue them!
----Never give up, the answer is where you have not looked yet--------
I'm trying to set up an ODBC client driver for Progress 10.1b. I was able to install the client software that is required, but there is apparently also an ODBC.reg script file that needs to be run to correctly set up the registry in order for me to use the ODBC drivers.
Can anyone point me to where I would find this script? Or tell me the set of registry entries that would have to be made?
That's not a standard part of the install process.
Are these the steps that you followed to get the client installed?
If, as you say, the client was properly installed you just need to setup the DSN. The following should work (stolen and lightly edited from the Progress Knowledge Center):
Start up the ODBC Data Source Administrator(found in Control Panel within the Administrative Tools folder)
Example:
1. Select the System DSN tab
2. Select the Add button to the right
3. Select the MERANT 32-BIT Progress SQL-92 driver for your version of Progress.
4. Select Finish
That brings up the configuration screen for a new DSN.
Fill-in the following information:
1. Data Source Name..... (whatever you choose)
2. Description.......(optional and whatever you think is appropriate)
3. Host Name......(the server where the database is located)
4. Port Number.... (the port your database broker was started with...if multiple
brokers..the SQL broker port)
5. Database Name....(database name you wish to connect to)
6. User ID...(the user you logged in with or if security is turned on..a user
that can connect to the database)
7. Leave all other tab settings at the defaults for the initial configuration.
8. Select the Apply button.
9. Select the Test Connect button.
10. Screen requesting a password pops up. (enter one only if the database
normally requires a user name and password from the 4GL side to enter the database)