I have already createdrpm file for my application. It works fine for Fedora linux. also the same worked fine for linux mint. But Solaris does not support rpm. So how to create installer package for solaris OS. I have solaris 10 linux as OS.
Thanks
Sunil Kumar Sahoo
The Solaris OS packaging format (pkgadd) is described in this Sun Solaris document.
There is also an open source project called OpenPKG that can be used on most Unix/Linux variants. I have not used it myself though.
Here is an interesting post about converting RPMs to Solaris Pkg.
Solaris packaging is the way to go. It's a little odd when you first look at it, but it's actually not too difficult once you get your head around it.
Related
I'm trying to connect my firebase auth to an expo project.
I'm following the main docs of each library. I'm stucking on this step.
I'm not able in windows to exeute this command line openssl rand -base64 32 | openssl sha1 -c.
I've tried with the specific https://code.google.com/archive/p/openssl-for-windows/downloads but I don't know how to reproduce the same line.
Any help would be great, thanks in advance.
You need to install openssl. It is usually available on Linux (which I think that article might have been written for). There are some Windows binaries available at here. Alternatively, you could setup a WSL session, and run the command from there.
that is a linux command. Therefore a linux terminal is needed.
there are at least 2 ways to get this done
using virtual machine with ubuntu or some other operating system that uses a linux terminal aka shell (which I doubt you know about)
OR
installing a linux emulator (windows 8+ since it's from the windows store)
assuming you would prefer option 2, go to the windows store, search "Kali" and you will find an app called Kali. install it and if an error shows up, here's a nice video here that talks about solving that error and you would have a kali terminal on your windows computer (your command would work there)
I would like to encrypt my org files(org-mode) or a region of the file in emacs. The option given in the tool does not work (gives me the error apply: Searching for program: no such file or directory, gpg). I guess because I am using emacs on windows and all the search on this topic point towards encrypting the files on UNIX platform. Can you please help me on how encryption can be achieved on windows. Thanks in advance.
I am using ergoemacs for windows downloaded from http://ergoemacs.org/index.html. The version is as follows:
GNU Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-29 on MARVIN ErgoEmacs distribution 2.0.0
Install GnuPG onto your Windows machine. Binary versions (i.e. ones that you don't have to compile yourself) are available from http://gpg4win.org/.
Once GnuPG is installed, and assuming you add its binary directory to your Windows %PATH%, Emacs should be able to use it.
solved the problem by installing cygwin (which has GPG installed) and using the same in emacs.
This can be done by giving the cgywin installed directory in the option cygwin-root-directory of the emacs editor
I am trying to compile Rcpp_0.9.7 from source on sparc-sun-solaris2.10. I am getting the following error when I try to use install.packages:
sh: make: not found
ERROR: compilation failed for package 'Rcpp'
From research on the internet, it appears others have had similar problems with solaris. Unfortunately I do not know very much about which compilers I should or should not be using. One thing I am beginning to realize, however, is that solaris seems to be a sub-optimal environment for running R (in terms of performance as well as convenience).
Solaris can mean different things: it could be Solaris on x86, or Solaris on Sparc.
According to the Rcpp build results page on CRAN, Rcpp does now build on x86 Solaris (thanks to a recent patch by Martyn Plummer) but not Sparc Solaris. We were just discussing that this week on the rcpp-devel list.
As for your error, you are lacking critical components, namely the make tool. You likely lack more. Your conclusion is correct, though. Depending your level of Unix knowledge, you may be best off to simply install Ubuntu and enjoy tens of thousands of pre-built packages, including R and well over a hundred related packages.
Not really a solution but too long for a comment.
First of all get a decent environment for your testing of building Rccp on Solaris. Personally I use VirtualBox on my Windows workstation. This way I have an environment that I can control myself and do not depend on any grumpy SysAdmin. Best of all: there's no cost involved! When you are confident with your build you can either (1) move the binaries over to your target host or (2) replicate the build setup on your target host.
Secondly you can use these instructions to set up a proper build host on Solaris. (you seem to be lacking some crucial tools!). Remember to use gmake when building as per the instructions in the posting.
As Dirk mentioned, you're lacking the make command. If you're running Solaris 10
or earlier, then you need to find your installation media and pkgadd SUNWsprot.
If you're running Solaris 11 or later, then
pkg install developer/build/make
will get you that utility. You probably need the system headers as well, which are in pkg://solaris/system/header for Solaris 11 and later, or SUNWhea in earlier releases.
I see that you mention sparc-sun-solaris2.10 in your question - is there any opportunity for you to update to Solaris 11 or later? The developer environment is muchmuch nicer in the newer releases. Certainly easier to get a copy of a compiler....
I am trying to start working with OpenCL. I have two NVidia graphics card, I installed "developer driver" as well as SDK from NVidia website. I compiled the demos but when I run
./oclDeviceQuery
I see:
OpenCL SW Info:
Error -1001 in clGetPlatformIDs Call
!!!
How can I fix it? Does it mean my nvidia cards cannot be detected? I am running Ubuntu 10.10 and X server works properly with nvidia driver.
I am pretty sure the problem is not related to file permissions as it doesn't work with sudo either.
In my case I have solved it by installing nvidia-modprobe package available in ubuntu (utopic/multiverse). And the driver itself (v346) was installed from https://launchpad.net/~mamarley/+archive/ubuntu/nvidia
Concretely, I have installed nvidia-opencl-icd-346, nvidia-libopencl1-346, nvidia-346-uvm, nvidia-346 and libcuda1-346. Not sure if they are all needed for OpenCL.
This is a result of not installing the ICD portion of Nvidia's openCL runtime. The ICD profile will instruct your application of the different openCL implementations installed on the system as multiple implementations from different vendors can coexist. Whe your application does not find the ICD information it gives the Error -1001.
Run your program as root. In case of success: you have trouble with cl_khr_icd- extension to load the vendor driver.
If you not running X11, you have to create device files manually or by (boot-)script:
ERROR: clGetPlatformIDs -1001 when running OpenCL code (Linux)
Same problem for me on a Linux system. Solution is to add the user to the video group:
# sudo usermod -aG video your-user-name
Since I just spend a couple of hours on this, I thought I would share:
I got the error because I was connected to the machine per remote desktop (mstsc). On the machine itself everything worked fine.
I have been told that it should work with TeamViewer by the way.
Dont know if you ever solved this problem, but I had the same issue and solved it in this post: ERROR: clGetPlatformIDs -1001 when running OpenCL code (Linux)
Hope it helps!
I have solved it in Ubuntu 13.10 saucy for intel opencl by created link:
sudo ln -s /opt/intel/opencl-1.2-3.2.1.16712/etc/intel64.icd /etc/OpenCL/vendors/nvidia.icd
I just ran into this problem on ubuntu 14.04 and I could not find ANY working answers anywhere online including this thread (though this was the first to show up on google). What ended up working for me was to remove ALL previous nvidia software and then to reinstall it using the .run file provided on the nvidia website. Installing the components through apt-get seems to fail for some reason.
1) Download CUDA .run file: https://developer.nvidia.com/cuda-downloads
2) Purge all previous nvidia packages
sudo apt-get purge nvidia-*
3) Install all run file components (you will likely have to stop X or restart in recovery mode to run this)
sudo sh cuda_X.X.XX_linux.run
This is because OpenCL has the same brain damaged one library per vendor setup that OpenGL has. A likely reason for the -1001 error is that you have compiled with a different library than the linker is trying to dynamically load.
So see if this is the problem run:
$ ldd oclDeviceQuery
...
libOpenCL.so.1 => important path here (0x00007fe2c17fb000)
...
Does the path point towards the NVidia-provided libOpenCL.so.1 file? If it doesn't, you should recompile the program with an -L parameter pointing towards the directory containing NVidia's libOpenCL.so.1. If you can't do that, you can override the linker's path like this:
$ LD_LIBRARY_PATH=/path/to/nvidias/lib ./oclDeviceQuery
For me, I was missing the CUDA OpenCL library, Running sudo apt install cuda-opencl-dev-12-0 solved it.
You should get number of platforms, allocate the memory for platforms, again get this platforms and then create context from this platform. There is good example:
http://developer.amd.com/support/KnowledgeBase/Lists/KnowledgeBase/DispForm.aspx?ID=71
This might be due to querying clGetPlatformIDs by multiple threads at the same time
I'm trying to build an application from source in windows that requires some Unix tools. I think it's the apparently standard ./configure; make; make install (there's no INSTALL file). First I tried MinGW but got confused that there was no bash, autoconf, m4, or automake exes in \bin. I'm sure I missed something obvious but I installed Cygwin anyways just to move forward. For some reason when I run
sh configure.sh
I get:
platform unix
compiler cc
configuration directory ./builds/unix
configuration rules ./builds/unix/unix.mk
My OS has identity problems. Obviously the makefile is all wrong since I'm not on unix but win32. Why would the configure script think this? I assume it has something to do with Cygwin but if I remove that I can't build it at all. Please help; I'm very confused.
Also is it possible to build using MinGW? What's the command for bash and is mingw32-make the same as make? I noticed they're different sizes.
Everything is fine. When you are inside CygWin, you are basically emulating an UNIX. sh runs inside CygWin, and thus identifies the OS correctly as Unix.
Have a look at GCW - The Gnu C compiler for Windows
Also, you might be interested in this help page, that goes into some detail about the minimal system (MSYS), such as how to install, configure et. c.
That should help you get bash, configure and the rest to work for MinGW as well.
From the Cygwin home page
Cygwin is a Linux-like environment for Windows. It consists of two parts:
A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality.
A collection of tools which provide Linux look and feel.
Since configure is using the Cygwin environment, it is interacting against the emulation layer and so it is just like it's working on a Unix environment.
Have you tried building the application and seeing if it works?