Any suggestions on how to do browser caching within a asp.net application. I've found some different methods online but wasn't sure what would be the best. Specifically, I would like to cache my CSS and JS files. They do change, however, it is usually once a month at the most.
Another technique is to stores you static images, css and js on another server (such as a CDN) which has the Expires header set properly. The advantage of this is two-fold:
The expires header will encourage browsers and proxies to cache these static files
The CDN will offload from your server serving up static files.
By using another domain name for your static content, browsers will download faster. This is because serving resources from four or five different hostnames increases parallelization of downloads.
If the CDN is configured properly and uses cookieless domain then you don't have unnecessary cookies going back and forth.
Its worth bearing in mind that even without Cache-Control or Expires headers most browsers will cache content such as JS and CSS. What should happen though is the browser should request the resource every time its needed but will typically get a "304 Unmodified" response and the browser then uses the cached item. This is can still be quite costly since its a round trip to the server but the resource itself isn't sent so the bytes transfered is limited.
IE left with no specific instructions regarding caching will by default use its own heuristics to determine if it should even bother to re-request an item its cached. This despite not being explicitly told that it can cache a resource. Its hueristics are based on the Last-Modified date of the resource, the older its the less likely it'll have changed now is its typical reasoning. Very wooly.
Frankly if you want to make a site perfomant you need to have control over such cache settings. If you don't have access to these settings then don't wouldn't worry about performance. Just inform the sponsor that it may not perform well because they haven't facilitated a platform that lets you deliver that.
You best bet to do this is to set an Expires header in IIS on the folders you want the content cached. This will tell most modern browsers and proxies to cache this static content. In IIS 6:
Right click on the folder (example CSS or JS) you want to be cached by the browser.
Click properties
Go to the HTTP Headers Tab
Check "Enabled content expiration"
Set some long period for expiration, like "Expires after 90 days"
Yahoo Developer's Blog talks about this technique.
Unless you configure IIS to give asp.net control of js/css/image requests it won't see them by default, hence your best plan (for long term maintainability) is to deliberately tweak the response headers at your firewall/trafficmanager/server or (better and what most of the world does at this point) to version your files in path, i.e:
Instead of writing this in your mark-up:
http://www.foo.com/cachingmakesmesad.css
Use this:
http://www.foo.com/cachingmakesmesad.css?v1
..and change the version number when you need to effectively clear cache. If that's every time then you could even append a GUID or datestamp instead, but I can't think of any occasion where I would want to do that really.
I thought your question was anti-cache but re-reading it I see I wasted a good answer there :P
Long story short, browsers are normally very aggressively pro-caching "simple" resources so you shouldn't have to worry about this, but if you did want to do something about it you would have to have access to a firewall/trafficmanager/IIS for the reasons above (ASP.NET won't be given a chance by default).
However... there is no way you can absolutely force caching, and nor should you. What is and isn't cached is rightfully the decision of the end-user, all you can do is strongly request.
In .net you can set up your JavaScript, CSS and Images as embedded resources.
.Net will then handle the file expiration for you.
The downside to this approach is that you have to do a new build for each set of changes (this might be an upside, depending on your deployment and workflow).
You could also use ETags, but from what I understand in some cases it doesn’t work well if you have mix of IIS and apache Webservers hosting your images, (or if you plan to switch in the future).
You can just make sure the file date is newer, and let the server handle it for you, but you’ve got to make sure the server is configured correctly.
You can cache static content by adding following code in web.config
<system.webServer>
<staticContent>
<clientCache httpExpires="Tue, 12 Apr 2016 00:00:00 GMT" cacheControlMode="UseExpires" />
</staticContent>
</system.webServer>
See the clientCache documentation for more details.
Related
I have way too many pages in the application that basically load the same set of xml and js files for client side interaction and validation. So, I have about dozen lines like this one <script type="text/javascript" src="JS/CreateMR.js"></script> or like this one <xml id="DefaultDataIslands" src="../XMLData/DataIslands.xml">.
These same files are included in every page and as such browser sends request to read them every time. It takes about 900ms just to load these files.
I am trying to find a way to load them on just the login page, and then use that temp file as source. Is it possible to do so? If yes, how and where should I start?
P.S. A link to a tutorial will work too, as I have currently no knowledge about that.
Edit:
I can't cache the whole page, because the pages are generated at runtime based on the different possible view modes. I can only cache the js and xml file. Caching everything might be a problem.
Anyway, I am reading through the articles suggested to figure out how to do it. So, I may not be able to accept any answer right away, while I finish reading and try to implement it in one page.
Edit:
Turns out caching is already enabled, it is just that my server is acting crazy. Check the screenshot below.
With Cache
Without cache
As you see, with cache, it is actually taking more time to process some of the requests. I have no idea what that problem is, but I guess I should go to the server stack exchange to figure this out.
As for the actual problem, turns out I don't have to do anything to enable caching of xml and js files. Had no idea browsers automatically cache js files without using specific tag.
Totally possible and in fact recommended.
Browsers cache content that have been sent down with appropriate HTTP caching headers and will not request it again until the cache has expired. This will make your pages faster and more responsive and your server's load much lighter.
Here is a good read to get you started.
Here is ASP.NET MVC caching guide. It focuses on caching content returned from controllers.
Here is a read about caching static content on IIS with ASP.NET MVC.
Basically, you want to use browser caching mechanism to cache the src files after the first request.
If you're using F12 tools in your browser to debug network requests, make sure you have disable cache option unchecked. Otherwise, it forces browser to ignore cached files.
Make sure your server sends and respects cache headers - it should return HTTP status 304 Unmodified after first request to a static file.
Take a look at Asp.Net Bundling and minification - if you have for example multiple js source files, you could bundle them into one file that will be cached on the first request.
Additionally, if you use external js libraries, you could download them from a CDN instead of your server - this will both offload your server and enable user browser to use cached script version (meaning - if some other page that user has visited also used the same script, browser should already have it cached).
One approach is caching static files via IIS by adding <clientCache> element in web.config file. The <clientCache> element of the <staticContent> element specifies cache-related HTTP headers that IIS and later sends to Web clients, which control how Web clients and proxy servers will cache the content that IIS and later returns.
How to configure static content cache per folder and extension in IIS7?
Client Cache
for more info on client side caching read this part of Ultra-Fast ASP.NET 4.5 book:
Browser Cache and Caching Static Content
Other approach is caching portions of page.
if your are using Web Form:
Caching Portions of an ASP.NET Page
and if you are using MVC, use Donut Hole Caching
ASP.NET MVC Extensible Donut Caching
Donut Caching and Donut Hole Caching with Asp.Net MVC
The browser has to ask the server if the file has been modified or not since it put it to the cache, therefore the http statuscode 304. Read more from https://httpstatuses.com/304.
As this is asp.net please make sure you are first running it with
<compilation debug="false"/>
as enabling debugging has some side effects which include.
"All client-javascript libraries and static images that are deployed via
WebResources.axd will be continually downloaded by clients on each page
view request and not cached locally within the browser."
More read from https://blogs.msdn.microsoft.com/prashant_upadhyay/2011/07/14/why-debugfalse-in-asp-net-applications-in-production-environment/
For a long time I've been updating ASP.NET pages on the server and never find the correct way to make changes visible on files like CSS and images.
I know if a append something in the URL the browser will think the file is another one:
<img src="/images/myLogo.png?v=1"/>
or perhaps changing its name:
<img src="/images/myLogo.v1.png"/>
Unfortunately it does not look the correct way. In a case were I'm using App_Themes the files in this folder are automatically injected in the page in a way I can't easily change the URL.
So my question is:
When I'm publishing de ASP.NET Application on the server what is the correct way to signal to IIS (and it notify browser after that) that a file was changed? It is not automatic? Should I change some configuration in IIS or perhaps make some "decoration" in the code?
I've already tried many questions here in SO like "ASP.NET - Invalidate browser cache", "How to refresh the browser cache of an image?", "Handle cached images? How to get the browser to show the new version?", and even "What is an elegant way to force browsers to reload cached CSS/JS files?" but none of them actually take another aproach else in a way you must handle it manually in the code instead of IIS or ASP.NET configuration.
The closer I could find is "Asking browsers to cache our images (ASP.NET/IIS)" where they set expiration but not based on the fact the files were update. Instead they used days or hour to cache those file so they would updated even when no changes were made.
I'm want to know if IIS or ASP.NET offers something related to this, automatically send to the browser that the files was changed. Is it possible/built in?
The options you have to update the browser side, cached item are:
Change the file name
Add url parameter
Place it on cache for a limited time (eg for couple of hours)
Compare the date-time of creation.
Signaling with eTag.
With the three two you avoiding one server call for each item, but the third option load it again after some time.
With the others you have to make one call to the server to see if needs to be load it again.
So you can not have all here, there is not correct way, and you need to chose what is the best for you, and what you can do. The faster from client perspective is the (1) and (2) options.
The direct answer to your question is to use eTag, or date-time compare of the file creation, but you loose that way, a call to the server, you only win the size of what is travel back.
Some more links:
http eTag
How do I support ETags in ASP.NET MVC?
Configuring ETags with Http module in asp.net
How to control web page caching, across all browsers?
Jquery getScript caching
and you can find even more.
This discussion around gzip, minified, and combining both for maximum compression effects made me wonder if I can get a net performance effect by placing jQuery libraries directly inside my HTML file?
I already do this for icon sprites, which I base64 encode and then load via CSS datasource, in an effort to minimize the number of HTTP requests.
Now I ask: do you know if loading the jQuery library in its raw min+gzip form, as available on the official production download link, would be more efficient compared to loading it via the Google AJAX libraries that are hosted on their CDN?
TL;DR:
You should always keep common items (like a JS library) in external files, because that allows for caching on your server, in the browser, and at many nodes along the way. Caching times dramatically outweigh compression or request times when looking at the overall speed of a page.
Longer Version:
There are a number of things to consider for this question. Here are the ones that came off the top of my head.
Minifying scripts and styles is always good for speed. I don't think there's much to discuss here.
Compression (and extraction in the browser) has an overhead. Firing up the gzip module takes time away from sending the request, so for small files or binary files (images, etc.), it's usually better to skip the gzip. Something large and consisting mostly of ascii (like a JS library), however, is a good thing to compress, so that checks out.
Reducing HTTP requests is generally a good thing to do. Note, though, that ever since HTTP 1.1 (supported in all major browsers), a new HTTP request does not mean a new socket connection. With keep-alive, the same socket connection can serve the webpage and all the affiliated files in one go. The only extra overhead on a request is the request and response headers which can be negligible unless you have a lot of small images/scripts. Just make sure these files are served from a cookie-free domain.
Related to point 3, embedding content in the page does have the benefit of reducing HTTP requests, but it also has the drawback of adding to the size of the page itself. For something large like a JS library, the size of library vastly outweighs the size of the HTTP overhead needed for an extra file.
Now here's the kicker: if the library is embedded in the page, it will almost never be cached. For starters, most (all?) major browsers will NOT cache the main HTML page by default. You can add a CACHE-CONTROL meta tag to the page header if you want, but sometimes that's not an option. Furthermore, even if that page is cached, the rest of your pages (that are probably also using the library) will now need to be cached as well. Suddenly you have your whole site cached on the user's machine including many copies of the JS library, and that's probably not what you want to do to your users. On the other hand, if you have the JS library as an external file, it can be cached by itself just once, especially (as #Barmar says) if the library is loaded from a common CDN like Google.
Finally, caching doesn't only happen in the client's browser. If you're running an enterprise-level service, you may have multiple server pools with shared and individual caches, CDN caches that have blinding speed, proxy caches on the way to your domain, and even LAN caches on some routers and other devices. So now I direct you back to the TL;DR at the top, to say that the speed-up you can gain by caching (especially in the browser) trumps any other consideration you are likely to encounter.
Hope that helps.
How can I make sure that static content (images, css, javascript) is cached? What is the best approach?
Will recommend you to go through this tutorial to understand how caching happens on web (HTTP) in general.
Simply speaking, the web server needs to generate appropriate HTTP headers while sending the content to the client in order to control client-side caching. In ASP.NET/IIS environment, its IIS that typically handles the static file contents and therefore, you must configure IIS appropriately to control caching static files as per you needs. See below links for more information about configuring IIS caching for static content:
http://www.iis.net/ConfigReference/system.webServer/staticContent/clientCache
How to configure static content cache per folder and extension in IIS7?
EDIT: As you have asked about the best approach, the most prevalent approach that I see now days is to version static content (say by appending some version identifier at the end of file or URL). Once version-ed, you can treat it as immutable and then emit cache headers for caching it for infinite duration. In ASP.NET application, you can probably append the assembly version (or product version) to each static content URL. So essentially, you will invalidating the cache for every build (or every product release).
You can also make use of the HTML5 Offline web applications manifest. It allows you to set up a manifest where you define which files will be cached locally.
It is a nice, clear to understand broadly implemented, way of avoiding having to learn about IIS and HTML Caching.
http://www.w3schools.com/html/html5_app_cache.asp
(you should totally read up about those things)
An architect at my work recently read Yahoo!'s Exceptional Performance Best Practices guide where it says to use a far-future Expires header for resources used by a page such as JavaScript, CSS, and images. The idea is you set a Expires header for these resources years into the future so they're always cached by the browser, and whenever we change the file and therefore need the browser to request the resource again instead of using its cache, change the filename by adding a version number.
Instead of incorporating this into our build process though, he has another idea. Instead of changing file names in source and on the server disk for each build (granted, that would be tedious), we're going to fake it. His plan is to set far-future expires on said resources, then implement two HttpModules.
One module will intercept all the Response streams of our ASPX and HTML pages before they go out, look for resource links and tack on a version parameter that is the file's last modified date. The other HttpModule will handle all requests for resources and simply ignore the version portion of the address. That way, the browser always requests a new resource file each time it has changed on disk, without ever actually having to change the name of the file on disk.
Make sense?
My concern relates to the module that rewrites the ASPX/HTML page Response stream. He's simply going to apply a bunch of Regex.Replace() on "src" attributes of <script> and <img> tags, and "href" attribute of <link> tags. This is going to happen for every single request on the server whose content type is "text/html." Potentially hundreds or thousands a minute.
I understand that HttpModules are hooked into the IIS pipeline, but this has got to add a prohibitive delay in the time it takes IIS to send out HTTP responses. No? What do you think?
A few things to be aware of:
If the idea is to add a query string to the static file names to indicate their version, unfortunately that will also prevent caching by the kernel-mode HTTP driver (http.sys)
Scanning each entire response based on a bunch of regular expressions will be slow, slow, slow. It's also likely to be unreliable, with hard-to-predict corner cases.
A few alternatives:
Use control adapters to explicitly replace certain URLs or paths with the current version. That allows you to focus specifically on images, CSS, etc.
Change folder names instead of file names when you version static files
Consider using ASP.NET skins to help centralize file names. That will help simplify maintenance.
In case it's helpful, I cover this subject in my book (Ultra-Fast ASP.NET), including code examples.
He's worried about stuff not being cached on the client - obviously this depends somewhat on how the user population has their browsers configured; if it's the default config then I doubt you'd need to worry about trying to second guess the client caching, it's too hard and the results aren't guaranteed, also it's not going to help new users.
As far as the HTTP Modules go - in principle I would say they are fine, but you'll want them to be blindingly fast and efficient if you take that track; it's probably worth trying out. I can't speak on the appropriateness of use RegEx to do what you want done inside, though.
If you're looking for high performance, I suggest you (or your architect) do some reading (and I don't mean that in a nasty way). I learnt something recently which I think will help -let me explain (and maybe you guys know this already).
Browsers only hold a limited number of simultaneous connections open to a specific hostname at any one time. e.g, IE6 will only do 6 connections to say www.foo.net.
If you call your images from say images.foo.net you get 6 new connections straight away.
The idea is to seperate out different content types into different hostnames (css.foo.net, scripts.foo.net, ajaxcalls.foo.net) that way you'll be making sure the browser is really working on your behalf.
http://code.google.com/p/talifun-web
StaticFileHandler - Serve Static Files in a cachable, resumable way.
CrusherModule - Serve compressed versioned JS and CSS in a cachable way.
You don't quite get kernel mode caching speed but serving from HttpRuntime.Cache has its advantages. Kernel Mode cache can't cache partial responses and you don't have fine grained control of the cache. The most important thing to implement is a consistent etag header and expires header. This will improve your site performance more than anything else.
Reducing the number of files served is probably one of the best ways to improve the speed of your website. The CrusherModule combines all the css on your site into one file and all the js into another file.
Memory is cheap, hard drives are slow, so use it!