Imagine I have this list, that is divided by 3
1
2
3
4
5
6
7
8
9
Now, I have 9 items, grouped in 3 sections.
My question is how know in which section is 6 (ie: 6 belong to section 2, 2 to section 1, 9 to section 3)
Hmmm...... section = ((item-1) / 3) + 1
section = ceiling (n / 3)
For example,
ceiling (4 / 3) = ceiling ( 1.33 ) = 2
For a list of items divided into sections of size n, the section s of an item i is given by:
s = (i + (n-1)) / n,
where the / is integer division.
So, for your example, item 6 gives (6 + (3-1))/3 = (6+2)/3 = 8/3 = 2.
This applies to many other things as well - I encountered it as "How many nodes do I need to request on a cluster with n CPUs per node?"
I'm not totally sure what you're asking, but give this a try:
floor((itemNumber - 1)/numberOfGroups) + 1
Related
So i've been looking into modulo recently. I'm trying to improve my math skills, which are not the best if i'm honest. But something i am trying to improve. I understand how this works i think. I am also quite competent with long division. However something is bugging me and i can't seem to find an answer for it online.
I know that 7 % 5 = 2 (5 goes into 7 once, with a remainder of 2).
What i don't understand is this;
1 % 3 = 1
How can this be, 3 goes into 1, 0 times, with a remainder of 3? Surely the answer to 1 % 3 = 3?
Can anyone explain this in its most simplest terms please?
Am i correct in thinking that if the dividend (1) is less than the devisor (3) which we know will equal 0 remainder x, it just uses the dividend as the result?
Thanks for your help.
The remainder in 1%3 refers to what remains of 1 (not 3) after you divide by 3. As you have already said, 3 goes into 1 zero times. So -- when you remove 0 multiples of 3 from 1, all of 1 remains. Thus 1 % 3 = 1.
The result of a modulo operation n % m is just that number r for which q * m + r = n (q may be anything). The only requirement we have is that 0 <= r < m.
So for instance:
7 % 5 --> 1 * 5 + 2 == 7 --> r = 2
1 % 3 --> 0 * 3 + 1 == 1 --> r = 1
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about programming within the scope defined in the help center.
Closed 7 years ago.
Improve this question
I used PEMDAS on 3 - 1 * 8 + 2 * 3.
Steps:
1) 1 * 8 = 8
2) 2 * 3 = 6
3) 8 + 6 = 14
4) 3 - 14 = -11
Multiply all the terms, then add and finally subtract but I get -11 as the result.
But when I googled it, it said 1. Where did I go wrong?
By Following the BODMAS rule -
3 - 1 * 8 + 2 * 3
So According to BODMAS Rule-
B → Brackets first (parentheses)
O → Of (orders i.e. Powers and Square Roots, Cube Roots, etc.)
DM → Division and Multiplication (start from left to right)
AS → Addition and Subtraction (start from left to right)
So our equation ->
3 - (1 * 8) + (2 * 3)
3-8+6
-5+6
1
After multiply all the terms,please follow the order of operations.Right steps:
Steps: 1) 1 * 8 = 8 2) 2 * 3 = 6 3)3-8=-5 4)-5+6=1
The order of operations is, as you said it PEMDAS (or BEDMAS whatever you like), but it is also left-to-right. And on top of that: multiplication and division are treated as the same order and so are addition and subtraction.
So your first two steps were right.
3 - (1 * 8) + (2 * 3)
3 - 8 + 6
Now here is where the left-to-right ordering takes place.
((3 - 8) + 6)
(-5 + 6)
1
To make it easier, you can remember that x - y is really just x + (-y). Then the order of subtraction and addition doesn't matter at all.
You are not following the order of operations correctly. You are correct in doing the multiplication first. However, you also must always go from left to right when performing operations of the same type (addition and subtraction or multiplication and division). By using parenthesis, we can make this clearer.
3 - (1*8) + (2*3) => 3 - 8 + 6 => -5 + 6 => 1
Your mistake is in step 3. The - gets applied to 8 so step 3 is: -8 + 6 = -2
so i have to use clisp to create 2 equaline equations given a sequence of numbers
IE user enters 2 2 2 2:
2 + 2 = 2 + 2 ; would be valid
2 - 2 = 2 - 2 ; would also be valid
2 = 2 + 2 - 2 ; valid
2 + 2 + 2 = 2 ; not valid
user enters 6 2 2 2:
6 = 2 + 2 + 2 ; valid
6 = 2 * 2 + 2 ; valid
6 + 2 = 2 * 2 ; not valid
The operates of *, /, +, and - are to be used for basic math, and = to signify that Left Hand Side = Right Hand Side.
My problem lies in my lack of any real lisp training and where to start. I think I would have to use macros, but I'm not sure how to use macros or how macros would be used for this.
I know that initially I would have to define a function such as
(defun findequation (a b c d))
But from there I'm lost
First step: create all combinations of the relevant symbols, with the restriction that exactly one = should be present.
Example input: (2 2 2 2), (+ - * / =)
Example output: (2 + 2 + 2 = 2), (2 + 2 - 2 = 2), (2 - 2 - 2 = 2), …
Second step: use the shunting-yard algorithm to transform the infix list of alternating numbers and symbols into a tree.
Example input: (2 + 2 = 2 - 2)
Example output: (= (+ 2 2) (- 2 2))
Then you can evaluate that to see if it is true.
Suppose we have a set like {1,2,3} then there is only one way to choose 3 consecutive numbers... it's the set {1,2,3}...
For a set of {1,2,3,4} we have 3 ways: 123 234 1234
(technically these are unordered sets of numbers, but writing them consecutively helps)
f(5) ; {1,2,3,4,5} -> 8 ways: 123 1234 1235 12345 234 2345 345 1345
f(6) ; {1,2,3,4,5,6} -> 20 ways: ...
f(7) ; {1,2,3,4,5,6,7} -> 47 ways: ...
So for a given N, I can get the answer by applying brute force, and calculating all such subset having 3 or more consecutive number.
Here I am just trying to find out a pattern, a technique to get the number of all such subset for a given N.
The problem is further generalized to .....discover m consecutive number within a set of size N.
There is a bijection between this problem and "the number of N-digit binary numbers with at least three consecutive 1s in a row somewhere" (the bijection being a number is 0 if excluded in the subset, and 1 if included in the subset).
This is a known problem, and should be enough information to google for a result, if you search for number of n-digit binary strings with m consecutive 1s, the second hit is Finding all n digit binary numbers with r adjacent digits as 1
Alternatively you can just look it up as http://oeis.org/search?q=0%2C0%2C1%2C3%2C8%2C20%2C47 (based on the brute-forcing you did for the first few terms) - resulting in an explicit formula of 2^n - tribonacci(n+3), see here for an explicit formula for tribonacci numbers. It also gives a recurrence relation. The analogy given is "probability (out of 2^n) of getting at least 1 run of 3 heads within n flips of a fair coin"
I can only assume that the answer to the general problem is 2^n - Fm(n+m), where Fm is the mth n-step Fibonacci number (edit: that does seem to be the case)
This sounds like homework to me, so I'll just get you started. FoOne approach is to think of the Lowest and Highest members of the run, L and H. If the set size is N and your minimum run length is M, then for each possible position P of L, you can work out how many positions of H there are....
With a bit of python code, we can investigate this:
y = set()
def cons(li, num):
if len(li) < num:
return
if len(li) == num:
y.add(tuple([i for i in li]))
else:
y.add(tuple([i for i in li]))
cons(li[1:], num)
cons(li[:-1], num)
This solution will be quite slow (it's exponential in complexity, actually), but try it out for a few small list sizes and I think you should be able to pick up the pattern.
Not sure if you mean consecutive or not. If not, then for {1, 2, 3, 4} there are 4 possibilities: {1, 2, 3} {2, 3, 4} {1, 3, 4} {1, 2, 3, 4}
I think you can calculate the solution with N!/3! where N! = N*(N-1)(N-2)...*1.
Quick answer:
Sequences(n) = (n-1)*(n-2) / 2
Long answer:
You can do this by induction. First, I'm going to re-state the problem, because your problem statement isn't clear enough.
Rule 1: For all sets of consecutive numbers 1..n where n is 2 or more
Rule 2: Count the subsets S(n) of consecutive numbers m..m+q where q is 2 or more
S(n=3)
By inspection we find only one - 123
S(n=4)
By inspection we find 3! - 123 234 and 1234
Note that S(4) contains S(3), plus two new ones... both include the new digit 4... hmm.
S(n=5)
By inspection we find ... S(n=4) as well as 345 2345 and 12345. That's 3+3=6 total.
I think there's a pattern forming here. Let's define a new function T.
Rule 3: S(n) = S(n-1) + T(n) ... for some T.
We know that S(n) contains the digit n, and should have spotted by now that S(n) also contains (as a subcomponent) all sequences of length 3 to n that include the digit n. We know they cannot be in S(n-1) so they must be in T(n).
Rule 4: T(n) contains all sequence ending in n that are of length 3 to n.
How many sequences are in S(n)?
Let's look back at S(3) S(4) and S(5), and incorporate T(n):
S(3) = S(3)
S(4) = S(3) + T(4)
S(5) = S(4) + T(5) = S(3) + T(4) + T(5)
let's generalise:
S(n) = S(3) + T(f) for all f from 4 to n.
So how many are in a given T?
Look back at rule 5 - how many sequences does it describe?
For T(4) it describes all sequences 3 and longer ending in 4. (that's 234)
For T(5) it describes all sequences 3 and longer ending in 5. (that's 345 2345 = 2)
T count Examples
4 2 1234 234
5 3 12345 2345 345
6 4 123456 23456 3456 456
Looks awfully like T(n) is simply n-2!
So
S(6) = T(6) + T(5) + T(4) + S(3)
10 = 4 + 3 + 2 + 1
And
S(7) = 15 = 5 + 4 + 3 + 2 + 1
S(8) = 21 = 6 + 5 + 4 + 3 + 2 + 1
Turning this into a formula
What's 2 * S(8)?
42 = 6 + 5 + 4 + 3 + 2 + 1 + 1 + 2 + 3 + 4 + 5 + 6
Add each pair of biggest and smallest numbers:
42 = 7 + 7 + 7 + 7 + 7 + 7
42 = 7 * 6
But that's 2 * S(8), so
S(8) = 42/2 = 21 = 7 * 6 / 2
This generalizes:
S(n) = (n-1)*(n-2) / 2
Let's check this works:
S(3) = 2*1/2 = 1
S(4) = 3*2/2 = 3
S(5) = 4*3/2 = 6
S(6) = 5*4/2 = 10
I'm satisfied.
I wasn't starting to understand linear recursion and then I thought I practice up on sorting algorithms and then quick sort was where I had trouble with recursion. So I decided to work with a simpler eg, a binary sum that I found online. I understand that recursion, like all function calls, are executed one # a time and not at the same time (which is what multi-threading does but is not of my concern when tracing). So I need to execute all of recursive call A BEFORE recursive call B, but I get lost in the mix. Does anyone mind tracing it completely. The e.g. I have used of size, n = 9 where elems are all 1's to keep it simple.
/**
* Sums an integer array using binary recursion.
* #param arr, an integer array
* #param i starting index
* #param n size of the array
* floor(x) is largest integer <= x
* ceil(x) is smallest integer >= x
*/
public int binarySum(int arr[], int i, int n) {
if (n == 1)
return arr[i];
return binarySum(arr, i, ceil(n/2)) + binarySum(arr,i + ceil(n/2), floor(n/2));
}
What I personally do is start with an array of size 2. There are two elements.
return binarySum(arr, i, ceil(n/2)) + binarySum(arr,i + ceil(n/2), floor(n/2)) will do nothing but split the array into 2 and add the two elements. - case 1
now, this trivial starting point will be the lowest level of the recursion for the higher cases.
now increase n = 4. the array is split into 2 : indices from 0-2 and 2-4.
now the 2 elements inside indices 0 to 2 are added in case 1 and so are the 2 elements added in indices 2-4.
Now these two results are added in this case.
Now we are able to make more sense of the recursion technique, some times understanding bottom up is easier as in this case!
Now to your question consider an array of 9 elements : 1 2 3 4 5 6 7 8 9
n = 9 => ceil(9/2) = 5, floor(9/2) = 4
Now first call (top call) of binarySum(array, 0, 9)
now n = size is not 1
hence the recursive call....
return binarySum(array, 0, 5) + binarySum(array, 5, 4)
now the first binarySum(array, 0 ,5) operates on the first 5 elements of the array and the second binarySum(array,5,4) operates on the last 4 elements of the array
hence the array division can be seen like this: 1 2 3 4 5 | 6 7 8 9
The first function finds the sum of the elements: 1 2 3 4 5
and the second function finds the sum of the elements 6 7 8 9
and these two are added together and returned as the answer to the top call!
now how does this 1+2+3+4+5 and 6+7+8+9 work? we recurse again....
so the tracing will look like
1 2 3 4 5 | 6 7 8 9
1 2 3 | 4 5 6 7 | 8 9
1 2 | 3 4 | 5 6 | 7 8 | 9
[1 | 2]___[3]___[4 5]___[6 7]___[8 9]
Till this we are fine..we are just calling the functions recursively.
But now, we hit the base case!
if (n == 1)
return arr[i];
[1 + 2]____[3]____[4 + 5]____[6 + 7]____[8 + 9]
[3 + 3] ____ [9] ____[13 + 17]
[6 + 9] [30]
[15 + 30]
[45]
which is the sum.
So for understanding see what is done to the major instance of the problem and you can be sure that the same thing is going to happen to the minor instance of the problem.
This example explains binary sum with trace in java
the trace is based on index of array , where 0 - is yours starting index and 8 is length of the array
int sum(int* arr, int p, int k) {
if (p == k)
return arr[k];
int s = (p + k) / 2;
return sum(arr, p, s) + sum(arr, s + 1, k);
}