DELTA22_OM/VM:Virt adaptor name=DELTA22_ELETYPE
DELTA22_OM/VM:Virt adaptor name=DELTA22_ELETYPE_EMES_VDU2_0
DELTA22_OM/VPORT:Virt adaptor name=DELTA22_ELETYPE_EMUS_26, Port name=FABRIC2
In these three string types, belonging to the field "meas", I want to extract only EMES and EMUS from the second and the third example and nothing from the first one. In other words I would like to extract only the four consecutive characters after the third underscore if a third underscore exists.
Tried the following code but it returns empty values
if(doc['meas'].value.indexOf('_') === 2){
def BA = doc['meas'].value.splitOnToken('_');
return BA[3].substring(0, 4);
Related
PurchPackingSlipJournalCreate class -> initHeader method have a line;
vendPackingSlipJour.PackingSlipId = purchParmTable.Num;
but i want when i copy and paste ' FDG 2020 ' (all blanks are tab character) in Num area and click okey, write this value as 'FDG2020' in the PackagingSlipId field of the vendPackingSlipJour table.
I tried -> vendPackingSlipJour.PackingSlipId = strRem(purchParmTable.Num, " ");
but doesn't work for tab character.
How can i remove all whitespace characters from string?
Version 1
Try the strAlpha() function.
From the documentation:
Copies only the alphanumeric characters from a string.
Version 2
Because version 1 also deletes allowed hyphens (-), you could use strKeep().
From the documentation:
Builds a string by using only the characters from the first input string that the second input string specifies should be kept.
This will require you to specify all desired characters, a rather long list...
Version 3
Use regular expressions to replace any unwanted characters (defined as "not a wanted character"). This is similar to version 2, but the list of allowed characters can be expressed a lot shorter.
The example below allows alphanumeric characters(a-z,A-Z,0-9), underscores (_) and hyphens (-). The final value for newText is ABC-12_3.
str badCharacters = #"[^a-zA-Z0-9_-]"; // so NOT an allowed character
str newText = System.Text.RegularExpressions.Regex::Replace(' ABC-12_3 ', badCharacters, '');
Version 4
If you know the only unwanted characters are tabs ('\t'), then you can go hunting for those specifically as well.
vendPackingSlipJour.PackingSlipId = strRem(purchParmTable.Num, '\t');
I have a dictionary of phone numbers where number is Key and country is value. I want to update the key and add country code based on value country. I tried to use the map function for this:
print('**Exmaple: Update phone book to add Country code using map function** ')
user=[{'952-201-3787':'US'},{'952-201-5984':'US'},{'9871299':'BD'},{'01632 960513':'UK'}]
#A function that takes a dictionary as arg, not list. List is the outer part
def add_Country_Code(aDict):
for k,v in aDict.items():
if(v == 'US'):
aDict[( '1+'+k)]=aDict.pop(k)
if(v == 'UK'):
aDict[( '044+'+k)]=aDict.pop(k)
if (v == 'BD'):
aDict[('001+'+k)] =aDict.pop(k)
return aDict
new_user=list(map(add_Country_Code,user))
print(new_user)
This works partially when I run, output below :
[{'1+952-201-3787': 'US'}, {'1+1+1+952-201-5984': 'US'}, {'001+9871299': 'BD'}, {'044+01632 960513': 'UK'}]
Notice the 2nd US number has 2 additional 1s'. What is causing that?How to fix? Thanks a lot.
Issue
You are mutating a dict while iterating it. Don't do this. The Pythonic convention would be:
Make a new_dict = {}
While iterating the input a_dict, assign new items to new_dict.
Return the new_dict
IOW, create new things, rather than change old things - likely the source of your woes.
Some notes
Use lowercase with underscores when defining variable names (see PEP 8).
Lookup values rather than change the input dict, e.g. a_dict[k] vs. a_dict.pop(k)
Indent the correct number of spaces (see PEP 8)
So I am going off memory here because I cannot see the code I am trying to figure this out for at the moment, but I am working with some old VB Script code where there is a data connection that is set like this:
set objCommand = Server.CreateObject("ADODB.command")
and I have a field from the database that is being stored in a variable like this:
Items = RsData(“Item”).
This specific field in the database is a long string of
text:
(i.e. “This is part of a string of text…Header One: Here is text after header one… Header Two: Here is more text after header two”).
There are certain parts of the text that I wish to store as a variable that are between two index positions in the long string of text within that field. They are separated by headers that are stored in the text field above like this: “Header One:” and “Header Two:”, and I want to capture all text that occurs in between those two headers of text and store them into their own variable (i.e. “Here is text after header one…”).
How do I achieve this? I have tried to use the InStr method to set the index but from how I understand how this works it will only count the beginning of where a specific part of the string occurs. Am I wrong in my thinking of this? Since that is the case, I am also having trouble getting the Mid function to work. Can some one please show me an example of how this is supposed to work? Remember, I am only going off of memory so please forgive me that I am unable to provide better code examples now. I hope my question makes sense!
I am hopeful that someone can help me with an answer tonight so I can try this out tomorrow when I am near the code again! Thank you for your efforts and any help offered!
You can extract all the substrings starting with the text Header and ending just before either the next Header or end-of-string. I have used regular expression to implement that and it is working for me. Have a look at the code below. If I get a simpler(non-regex solution), I will update the answer.
Code:
strTest = "Header One: Some random text Header Two: Some more text Header One: Some random textwerwerwefvxcf234234 Header Three: Some more t2345fsdfext Header Four: Some randsdfsdf3w42343om text Header Five: Some more text 123213"
set objReg = new Regexp
objReg.Global = true
objReg.IgnoreCase = false
objReg.pattern = "Header[^:]+:([\s\S]*?)(?=Header|$)" '<---Regex Pattern. Explained later.
set objMatches = objReg.Execute(strTest)
Dim arrHeaderValues() '<-----This array contains all the required values
i=-1
for each objMatch in objMatches
i = i+1
Redim Preserve arrHeaderValues(i)
arrHeaderValues(i) = objMatch.subMatches.item(0) '<---item(0) indicates the 1st group of each match
next
'Displaying the array values
for i=0 to ubound(arrHeaderValues)
msgbox arrHeaderValues(i)
next
set objReg = Nothing
Regex Explanation:
Header - matches Header literally
[^:]+: - matches 1+ occurrences of any character that is not a :. This is then followed by matching a :. So far, keeping the above 2 points in mind, we have matched strings like Header One:, Header Two:, Header blabla123: etc. Now, whatever comes after this match is relevant to us. So we will capture that inside a Group as shown in the next breakup.
([\s\S]*?)(?=Header|$) - matches and captures everything(including newlines) until either the next Header or the end-of-the-string(represented by $)
([\s\S]*?) - matches 0+ occurrences of any character and capture the whole match in Group 1
(?=Header|$) - match and capture the above thing until another instance of the string Header or end of the string
Click for Regex Demo
Alternative Solution(non-regex):
strTest = "Header One: Some random text Header Two: Some more text Header One: Some random textwerwerwefvxcf234234 Header Three: Some more t2345fsdfext Header Four: Some randsdfsdf3w42343om text Header Five: Some more text 123213"
arrTemp = split(strTest,"Header") 'Split using the text Header
j=-1
Dim arrHeaderValues()
for i=0 to ubound(arrTemp)
strTemp = arrTemp(i)
intTemp = instr(1,strTemp,":") 'Find the position of : in each array value
if(intTemp>0) then
j = j+1
Redim preserve arrHeaderValues(j)
arrHeaderValues(j) = mid(strTemp,intTemp+1) 'Store the desired value in array
end if
next
'Displaying the array values
for i=0 to ubound(arrHeaderValues)
msgbox arrHeaderValues(i)
next
If you don't want to store the values in an array, you can use Execute statement to create variables with different names during run-time and store the values in them. See this and this for reference.
Required suggestion on below part.please any one give solution.
We have mapping from 850 to FlatFile
X12/PO1Loop1/PO1/PO109 and I need to map to field VALUE which is under record Option which is unbounded.
Split PO109 into substrings delimited by '.', foreach subsring after the first, create new Option with value=substring
So in input sample we have value like 147895632qwerqtyuui.789456123321456987
Similarly the field repeats under POLoop1.
So I need to split value based on (.) then pass a value to value field under option record(unbounded).
I tried using below code snippet
public string SplitValues(string strValue)
{
string[] arrValue = strValue.Split(".".ToCharArray());
foreach (string strDisplay in arrValue)
{
return strDisplay;
}
}
But it doesn't works, and I am not really familiar with the String methods and I am not sure if there's an easy way to do this. I have a String which contains couple of values delimited with "." .
So I need to separate values based on delimiter(.) and pass value to field.
How can I do this
As I mentioned, not too clear what is your objective, but I think you want to split a node that has some kind of delimiter into multiple nodes... if so, Try this: https://seroter.wordpress.com/2008/10/07/splitting-delimited-values-in-biztalk-maps/
He is doing exactly that. Given a node with a|b|c|d as value, output multiple nodes, each containing the value after splitted by |, so node1 = a, node2 = b, node3 = c, node4 = d.
I have a dropdownlist that has the value of two columns in it... One column is a number ranging from 5 characters long to 8 characters long then a space then the '|' character and another space, followed by a Description for the set of numbers.
An example:
12345678 | Description of Product
In order to pull the items for the dropdownlist into my database I need a to utilize a substring to pull the sequence of numbers out only.
Is it possible to write a substring to pull multiple character lengths? (Sometimes it may be 6 numbers, sometimes 5 numbers, sometimes 8, it would depend on what the user selected from the dropdownlist.)
Use a regular expression for this.
Assuming the number is at the start of the string, you can use the following:
^[0-9]+
Usage:
var theNumbers = RegEx.Match(myDropdownValue, "^[0-9]+").Value;
You could also use string.Split to get the parts separated by | if you know the first part is what you need and will always be numeric:
var theNumbers = myDropdownValue.Split("| ".ToCharArray(),
StringSplitOptions.RemoveEmptyEntries)[0];
Either of these approaches will result in a string. You can use int.Parse on the result in order to get an integer from it.
This is how I would do it
string str = "12345678 | Description of Product";
int delimiter;
delimiter = str.IndexOf("|") - 1;
string ID =str.substring(0, delimiter);
string desc = str.substring(delimiter + 1, str.length - 1);
Try using a regex to pull out the first match of a sequence of numbers of any length. The regex will look something like "^\d+" - starts with any number of decimal digits.
Instead of using substring, you should use Split function.
var words = phrase.Split(new string[] {" | "},
StringSplitOptions.RemoveEmptyEntries);
var number = word[0];