I am trying to use the census_api_key() function in tidycensus, but keep getting an error that it can't be found, nor does it seem like the tidycensus library is being installed properly according to the error messages I am receiving.
Here is what I've done so far:
> install.packages("tidycensus")
WARNING: Rtools is required to build R packages but is not currently installed. Please download and install the appropriate version of Rtools before proceeding:
https://cran.rstudio.com/bin/windows/Rtools/
Installing package into ‘C:/Users/matia/OneDrive/Documents/R/win-library/3.6’
(as ‘lib’ is unspecified)
trying URL 'https://cran.rstudio.com/bin/windows/contrib/3.6/tidycensus_0.11.4.zip'
Content type 'application/zip' length 2683556 bytes (2.6 MB)
downloaded 2.6 MB
> library(tidycensus)
Error: package or namespace load failed for ‘tidycensus’:
object ‘is_present’ is not exported by 'namespace:lifecycle'
In addition: Warning message:
package ‘tidycensus’ was built under R version 3.6.3
> census_api_key("my key")
Error in census_api_key("my key") :
could not find function "census_api_key"
I've also tried installing the rgdal library, as was suggested for other tidycensus errors, but this hasn't worked for me.
Any suggestions are greatly appreciated.
Related
I am trying to use a function in the R package adegenet
It seems like it will install fine, but then when i call the package i get an error.
> install.packages("adegenet")
Installing package into ‘/Users/j2/Library/R/4.1/library’
(as ‘lib’ is unspecified)
trying URL 'https://mirrors.nics.utk.edu/cran/bin/macosx/contrib/4.1/adegenet_2.1.5.tgz'
Content type 'application/x-gzip' length 2830546 bytes (2.7 MB)
==================================================
downloaded 2.7 MB
The downloaded binary packages are in
/var/folders/p9/cy6q_pk935z1dfplsjrts30h0000gr/T//RtmpZXEMHg/downloaded_packages
> library(adegenet)
Error in value[[3L]](cond) :
Package ‘adegenet’ version 2.1.4 cannot be unloaded:
Error in unloadNamespace(package) : namespace ‘adegenet’ is imported by ‘adephylo’ so cannot be unloaded
I'm not sure if the problem is with the install or calling the library. Any advice would be appreceated.
Thanks!
I am trying to install 'gplots' in R 3.4.4, however I keep getting the following error:
install.packages("gplots")
Installing package into ‘/home/u1983390/R/x86_64-pc-linux-gnu-library/3.4’
(as ‘lib’ is unspecified)
Warning: dependency ‘caTools’ is not available
trying URL 'https://cloud.r-project.org/src/contrib/gplots_3.0.3.tar.gz'
Content type 'application/x-gzip' length 516153 bytes (504 KB)
==================================================
downloaded 504 KB
ERROR: dependency ‘caTools’ is not available for package ‘gplots’
* removing ‘/home/u1983390/R/x86_64-pc-linux-gnu-library/3.4/gplots’
The downloaded source packages are in
‘/tmp/Rtmplw9pSu/downloaded_packages’
Warning message:
In install.packages("gplots") :
installation of package ‘gplots’ had non-zero exit status
> install.packages('caTools')
Installing package into ‘/home/u1983390/R/x86_64-pc-linux-gnu-library/3.4’
(as ‘lib’ is unspecified)
Warning message:
package ‘caTools’ is not available (for R version 3.4.4)
I believe this can be solved by installing a version of caTools compatible with R 3.4.4 following this method. However, I cannot find where older versions of caTools are (I have looked in the CRAN archive).
Would anybody be able to direct me to an earlier version, or does anyone know a different method for instaling gplots?
Cheers,
Jamie
RStudio is not letting me install any new packages. As an example, I attempted to install "rio" today and got the following message:
install.packages("rio")
Installing package into ‘C:/Users/kjl5444/Documents/R/win-library/3.2’
(as ‘lib’ is unspecified)
Warning in install.packages :
dependency ‘openxlsx’ is not available
There is a binary version available but the source version is later:
binary source needs_compilation
rio 0.4.0 0.5.5 FALSE
installing the source package ‘rio’
trying URL 'https://cran.rstudio.com/src/contrib/rio_0.5.5.tar.gz'
Content type 'application/x-gzip' length 390824 bytes (381 KB)
downloaded 381 KB
'C:\Program' is not recognized as an internal or external command,
operable program or batch file.
Warning in install.packages :
running command '"C:/Program Files/R/R-32~1.2/bin/x64/R" CMD INSTALL -l "C:\Users\kjl5444\Documents\R\win-library\3.2" C:\Users\kjl5444\AppData\Local\Temp\RtmpaQwlLL/downloaded_packages/rio_0.5.5.tar.gz' had status 1
Warning in install.packages :
installation of package ‘rio’ had non-zero exit status
The downloaded source packages are in
‘C:\Users\kjl5444\AppData\Local\Temp\RtmpaQwlLL\downloaded_packages’
> library(rio)
Error in library(rio) : there is no package called ‘rio’
Any help on deciphering and fixing this error?
While trying to install the rio package in Microsoft windows. I faced an error. In order to resolve that issue, I googled and came to this page.
I know this post is a bit old post but thought to share it for those who face a similar issue in installing this package.
Similar to this post:
Error: "there is no package called ..." and trying to use install.packages to solve it
I could only install rio when I used the command:
install.packages('rio', dependencies = TRUE, repos='http://cran.rstudio.com/')
Perhaps it can help you successfully install the required packages as it ensures that dependencies are also installed along with the required package.
I'm new to R and I'm just trying to get through some tutorials.
When I try installing ggplot2, I get this error.
Error in library(ggplot2) : There is no package called 'ggplot2'
I tried these in R and RStudio.
install.packages("ggplot2", dep=T)
install.packages('ggplot2', repos='http://cran.us.r-project.org')
remove.packages("ggplot2")
but I get the error
(Error in remove.packages : there is no package called 'ggplot2')
This is what I get from install.packages("ggplot2")
> install.packages("ggplot2")
Installing package into ‘.../R/win-library/3.4’
(as ‘lib’ is unspecified)
Warning in install.packages :
'lib = ".../R/win-library/3.4"' is not writable
trying URL 'https://cran.rstudio.com/bin/windows/contrib/3.4/ggplot2_2.2.1.zip'
Content type 'application/zip' length 2784566 bytes (2.7 MB)
downloaded 2.7 MB
package ‘ggplot2’ successfully unpacked and MD5 sums checked
Warning in install.packages :
cannot remove prior installation of package ‘ggplot2’
The downloaded binary packages are in
C:...\AppData\Local\temp\RtmpqaGNpr\downloaded_packages
I removed all ggplot2 files manually then tried to install again. Here's my result.
> install.packages("ggplot2")
Installing package into ‘.../R/win-library/3.4’
(as ‘lib’ is unspecified)
--- Please select a CRAN mirror for use in this session ---
trying URL 'https://ftp.osuosl.org/pub/cran/bin/windows/contrib/3.4/ggplot2_2.2.1.zip'
Content type 'application/zip' length 2784566 bytes (2.7 MB)
downloaded 2.7 MB
package ‘ggplot2’ successfully unpacked and MD5 sums checked
Warning: unable to move temporary installation ‘...\R\win-library\3.4\file26b43a54980\ggplot2’ to ‘...\R\win-library\3.4\ggplot2’
The downloaded binary packages are in
C:...\AppData\Local\temp\Rtmpq0T9a6\downloaded_packages
> library(ggplot2)
Error in library(ggplot2) : there is no package called ‘ggplot2’
> library("ggplot2")
Error in library("ggplot2") : there is no package called ‘ggplot2’
These code was run using R 3.4.2
Steps
Go To Tools
Install Packages
In Packages Text Box Type ggplot2
Check the checkbox install dependencies
When having this issue I would suggest :
try turning it off and on again
update R to last version if possible
remove manually all the folders related to the relevant package and retry the installation
change your default library location : How do you change library location in R?
Try launching R client directly from command prompt, then issue the instruction:
install.packages("ggplot2", lib="C:/Users/YourUser/Documents/R/win-library/3.3")
You need to update your R version and do this but you'll need install all packages again:
Tool > Global Options > R version (CHANGE) > Select "Use your machine's default version of R..."
I'm having problems installing the package car in R.
There are previous posts on the topic, including this one and this other one.
I have followed the suggestions I've come across so far without success. I am using R Version 3.2.2. and RStudio.
This is the message I get:
install.packages("car")
Installing package into ‘C:/Users/.../Documents/R/win-library/3.2’
(as ‘lib’ is unspecified)
trying URL 'https://cran.rstudio.com/bin/windows/contrib/3.2/car_2.1-3.zip'
Content type 'application/zip' length 1447213 bytes (1.4 MB)
downloaded 1.4 MB
package ‘car’ successfully unpacked and MD5 sums checked
The downloaded binary packages are in
C:\Users\...\AppData\Local\Temp\Rtmpc3xr5i\downloaded_packages
If I check I get,
?car
No documentation for ‘car’ in specified packages and libraries:
you could try ‘??car’
I tried installing it from R with Install packages from local zip drives, and looking for the zip in C:\Users\...\AppData\Local\Temp\Rtmpc3xr5i\downloaded_packages, but this is the result:
library(car)
Error in library.dynam(lib, package, package.lib) :
DLL ‘SparseM’ not found: maybe not installed for this architecture?
In addition: Warning message:
package ‘car’ was built under R version 3.2.5
Error: package or namespace load failed for ‘car’
I did try installing SparseM even before posting the OP without success:
> install.packages("SparseM")
Installing package into ‘C:/Users/.../Documents/R/win-library/3.2’
(as ‘lib’ is unspecified)
trying URL 'https://cran.rstudio.com/bin/windows/contrib/3.2/SparseM_1.7.zip'
Content type 'application/zip' length 795531 bytes (776 KB)
downloaded 776 KB
package ‘SparseM’ successfully unpacked and MD5 sums checked
The downloaded binary packages are in
C:\Users\...\AppData\Local\Temp\Rtmpc3xr5i\downloaded_packages
> ?SparseM
No documentation for ‘SparseM’ in specified packages and libraries:
you could try ‘??SparseM’
Follow up:
After a comment regarding R version 3.2.3 I thought it would be an easy fix to just download this version, install, and erase 3.2.2. The problem then is that RStudio did not seem to work. I un-installed and re-installed R-studio, and now I get this when opening R studio:
Without knowing what version of the car package you're using, it's hard to know exactly what the source of the problem is. It seems likely, however, that you haven't installed the proper version of the pbkrtest, on which the Rcmdr package depends.
Is there a compelling reason not to upgrade everything to their current versions, including R, all packages, and RStudio?
Best,
John