I have installed Github Airflow by downloading every single PyPi dependency and installing it in offline mode.
Now when I am running web-server, its giving a warning "please make sure to build the frontend in static/ directory and then restart the server".
I can access Airflow webpage but its distorted. Airflow logo is almost capturing the 50% page.
Can somebody please help me setting up Airflow properly?
Thanks in advance
I found solution to my problem, just in case someone else also faces same issue and searching for solution.
You need to compile assets with a script "compile_assets.sh".
But the catch is, you need to execute this script from where the Airflow is installed and not from the source location.
The message "please make sure to build the frontend in static/ directory and then restart the server" is suggesting to compile the static assets.
./airflow/www/compile_assets.sh script was useful for this purpose but it is removed in the newer version of airflow.
In case you are using breeze, run the below command to compile the assets
breeze compile-www-assets
help on breeze is available
breeze --help
If you are building the package yourself then run the below command (This is present at the end of INSTALL file)
python setup.py compile_assets
COMPILING FRONT-END ASSETS (in case you see "Please make sure to build
the frontend in static/ directory and then restart the server")
python setup.py compile_assets
Related
I'm having issues getting some modules to install. I've been able to get mod-1v1-arena and mod-npc-free-professions working, but I haven't been able to get these other modules to work:
mod-new-character-perks
mod-learn-spells
mod-quick-teleport
Can someone please confirm I have the correct workflow, or advise on what steps I'm missing.
Clone module folder from git to .\azerothcore-wotlk\modules
Run Git CLI: ./acore.sh docker build
Copy mod_learnspells.conf to .\azerothcore-wotlk\env\docker\etc\modules
I see instructions about rebuilding with CMake, is that necessary if I'm using docker build...? I tried CMake too and I got an error immediately with the software setup, so haven't pursued it further.
I'm also a bit confused by the .conf files, which folder does the server read them from?
.\azerothcore-wotlk\env\docker\etc\modules or .\azerothcore-wotlk\modules\mod-learn-spells\conf
I would try to install without any modules to check for the core stability and then work up from there one by one.
This way, if there's a module that's currently not working due to recent PR's like the Autobalance and possibly mod-learn-spells you can report an issue and work without it until It's back up.
AzerothCore Continuous Integration build with modules is currently failing aswell if you check the Readme notes where it says
I tried to install Simple OAuth (https://www.drupal.org/project/simple_oauth) module in my drupal site running in a shared Godaddy hosting. My first mistake was not to read the installation guide instructing to install the module by using composer. Instead, I installed the module using the Extend=>install a module link within Drupal. Installing the simple_oauth and enabling the module crashed my site and there is no output from the site.
Then I realised there is something wrong with the installation and checked the error log file. The error logged was:
PHP Fatal error: Interface 'League\OAuth2\Server\Repositories\AccessTokenRepositoryInterface' not found in /home/-----------/public_html/drupal/modules/simple_oauth/src/Repositories/AccessTokenRepository.php on line 10
At that point I realised there is something wrong with the installation and checked the module instructions which states I should use composer to install the module. I tried to solve this problem by redoing the installation from the ssh by using composer and this command:
composer config repositories.drupal composer https://packages.drupal.org/8 && composer require drupal/simple_oauth:^3
Which did not work because GoDaddy shared hosting plan has only 512mb of rams and composer kills the command because of lack of memory.
I tried reading through and understand how Composer works. There were recommendations saying you should never use composer in a production site and you should run it on your computer and copy the composer.lock file which needs much less rams. I created a PHP server using XAMMP on my computer and copied the composer.json file to my computer and run composer update command in my computer. It downloaded the dependencies and stuff on my computer. And feeling I get the hang of it, I copied the composer.lock file in my drupal server, run composer update command and saw composer delete many stuff which I could not undo.
So my questions are: 1- Is there a way of rescuing this drupal site at this point? I deleted many composer dependencies as far as I can understand.
The new error log says: PHP Fatal error: Interface 'Symfony\Component\HttpKernel\HttpKernelInterface' not found in /home/--------/public_html/drupal/core/lib/Drupal/Core/DrupalKernelInterface.php on line 15
2- If not, which is fine as I was just beginning to setup the site. Is it possible for someone to explain the best way of handling this scenario? I mean installing a module using composer in a memory critical place. Or explain how composer works for layman. I read about all the dependency stuff but could not figure out how to use it for this scenario.
Thanks.
I tried to install Meteor on another system. Installation go well, then I copied my project and I am running meteor run but
"Extracting meteor-tool#1.4.0-1" it is happening forever. Then I tried to update version number to 1.4.1 and run again "meteor run". Now I do not need to install 1.4.0.1 so it worked but got stuck on extracting on other modules.
Possible reasons can be extraction program of this is release is faulty. Would someone suggest a solution or how can I download 1.4.0.1 release of meteor directly?
https://github.com/meteor/meteor/issues/7688
I found the answer of this problem. This is problem with tar extractor.
I installed the newest 7zip and renamed the tar.exe in my GIT program folder ("where tar" command in cmd revealed, that somehow that exe was associated with .tar archives) to tar.exe.old.
If you can not find where is tar then run "where tar" command to get path of tar.exe
This solves the problem.
Take a look at this answer: https://stackoverflow.com/a/40122752/6861101
Try adding the following to your local hosts file (C:\Windows\System32\Drivers\etc\hosts):
54.192.225.217 warehouse.meteor.com
Then run a meteor reset in your app directory (warning - will wipe your local DB), then try starting your app again.
This worked for me.
I am following the installation guidelines as described on mean.js.org Everything seemed to install fine. I have all prereqs installed. I ran npm install after cloning the github repo and then tried to run grunt and I didnt get any errors however It seems to just be stalling on the command line. Last message on the command line is the "debugger is running on port 5858" and then it just sits there.
After some time the message [nodemon] watching 51,839 files - this might cause high cpu usage. To reduce use "--watch" comes up. I am on windows 10 and have all the latest versions of node,npm,grunt and mean.js. I am running the command line as admin.
Mean.js should be running on localhost:3000 but it is not.
This is intended.
There is an application invoked by the grunt command and running in background, watching your files for changes. In default configuration: nodemon and grunt-watch.
This will execute specific tasks based on the files you edited, such as linting JS files or compiling LESS files.
The cmd will probably show something when you edit files in the projects directory.
I have developed a TideSDK application and am now ready to package it, but I'm having problems with the network type installer.
It always gives me code 404 on the Application first run:
Could not query info: Invalid HTTP Status Code (404)
I presume the installer is having difficulty with reaching the correct servers and downloading the needed runtime, but I have run through most solutions on this forum, and none have worked.
So I tried a bundle packaging, as it should include such runtime, but I must be doing something wrong, since it does not bundle within the MSI.
The code I'm executing is as follows:
C:\TideSDK\sdk\win32\1.2.0.RC6d\tibuild.py -p --type=BUNDLE --os=win32 "C:\path_to_app\app_dir"
I also tried:
C:\TideSDK\sdk\win32\1.2.0.RC6d\tibuild.py -p -t bundle --os=win32 "C:\path_to_app\app_dir"
And all the uppercase/lowercase combinations. Also tried version 1.2.0.4, without sucess. Am I doing something wrong?
the network type installer is not available anymore, since appcelerator has canceled their services for titanium desktop.
So you can only do bundle packaging. Try the following command:
python tibuild.py --dest=. --type=bundle --package=. "c:\path\to\your\app\dir"
This should build and package your app and create a installer for it.
Change "dest" and "package" to the directories where you want to have the built app and installation package.
You can omit the OS parameter, since the builder can only generate builds for the current OS.