I am trying to build Alexa skill with Jovo but stuck at one place where jovo deploy is not working. Looking at error it seems like its unable to find ask-cli. Jovo build works fine, plus if i try ask-cli deploy that one also works. The issue seems to be with some configuration, i tried looking at all project files but didn't find any setting which can resolve this issue. Can someone please guide me if i am missing anything here..
Steps followed -
1 - jovo new helloworld
2 - jovo run
3 - jovo build
4 - jovo deploy
I found few people running ask init but it ask for lambda and skill file path which I don't see available with jovo. i tried comparing jovo files with ask-cli and didn't find matching file for lambda so not sure if this can be issue.
This answer is just workaround, the original issue remain as it is. Workaround is skip this auto deploy process and do everything manually.
Based on app.js build Alexa skill (Make sure to have all handler)
Create zip file for all files under your jovo folder.
Create new lambda function, and upload this file (Enter skill id and add Alexa trigger).
Update index.handler path to ./src/index.handler
Test code using Alexa Start Session
This seems to be Jovo 2.0 method of deployment, I am just using it as workaround until I find some fix for auto jovo deployment.
Related
i am trying to deploy my project on firebase hosting. And whenever i am using firebase init it is showing error in terminal as "firebaserc already has a default project " and it exit with that error
i have tried firebase logout and firebase login again . And used "firebase use" command also to change the project but it is still performing the firebase init action on the default project
i want to remove that default project
If you look very carefully at the messaging, it's saying that the name of the file is ".firebaserc" with a leading dot. This file indicates that firebase init was already run in this folder, and the contents of that file describe which project it's connected to (flairboat-48f7b). If you no longer want that file, delete it and start over. Since it starts with a dot, it might be hidden from normal view, but you can be sure that it exists.
you should write:
firebase use --add
and it work! You get the option to choose the preject from firebase.
I ran into the same issue.
Due to a small mistake in setting up the project in firebase, I had to delete it.
But later, I realized that my application NEEDS the default project to be hosted from firebase.
Since I found no shortcuts and running out of time, I did "this" to fix the issue in 10 minutes...with a 5-Step-Process. This is not a "Clever tip". But if you want things up and running soon, you can try this...
Create a new project (in my case, it's React project in VS Code IDE) using - npx create-react-app newprojectname to create a new react project with a different file name.(Don't delete or replace your previous project yet... )
While the new project is being created, create a new project in firebase to host your project.
Copy the folder from your old project that has all your work (it's "src" folder in case of React) and replace the "src" folder in the new project you created in your local machine.
Install all dependencies...Don't forget to add any dependencies you added to you old project. Look at the package.json file of the old project and import all dependencies.
Hit the start command (npm start in my case) and see your project running.
*I'll update if I found some firebase secret to resolve this issue. You can look for the same.
Ensure your firebase project support email and firebase initialize login email are same. If different? It won't be worked. so you must ensure it that two email (firebase project support email and firebase initialize email) are same.
When using SelectPDF on Appharbor, I get the error Conversion failure. Could not find 'Select.Html.dep' Looking at the SelectPDF docs, I see that the error means the .dep file was not copied to the project. I've removed it from my .gitignore and committed it to the repo but I still get the error. (I'm using the BitBucket -> Appharbor integration so that my code pushes and builds on AppHarbor every time I push to master.)
How can I get this file up into the bin folder on AppHarbor so SelectPDF will work properly?
Got it working using the steps outlined here: https://support.appharbor.com/discussions/problems/924-deploy-unreferenced-files-to-bin-folder
Added an AfterBuild target to copy the missing .dep file.
I need to be able to perform all of the available functions that the Package Manager Console performs for code first DB migrations. Does anyone know how I could accomplish these commands strictly through user defined code? I am trying to automate this whole migration process and my team has hit the dreaded issue of getting the migrations out of sync due to the number of developers on this project. I want to write a project that the developer can interact with that will create and if need be rescaffold their migrations for them automatically.
PM is invoking through PowerShell and PS cmdlets (like for active directory etc.)
http://docs.nuget.org/docs/reference/package-manager-console-powershell-reference
The Package Manager Console is a PowerShell console within Visual
Studio
...there is essentially very little info about this - I've tried that before on couple occasions and it gets down to doing some 'dirty work' if you really need it (not really sure, it might not be that difficult - providing you have some PS experience)
Here are similar questions / answers - working out the PS comdlets is pretty involving - in this case it has some additional steps involved. And PS tends to get very version dependent - so you need to check this for the specific EF/CF you're using.
Run entityframework cmdlets from my code
Possible to add migration using EF DbMigrator
And you may want to look at the source code for EF that does Add-Migration
(correction: this is the link to official repository - thanks to #Brice for that)
http://entityframework.codeplex.com/SourceControl/changeset/view/f986cb32d0a3#src/EntityFramework.PowerShell/Migrations/AddMigrationCommand.cs
http://entityframework.codeplex.com/SourceControl/BrowseLatest
(PM errors also suggest the origins of the code doing the Add-Migrations to be the 'System.Data.Entity.Migrations.Design.ToolingFacade')
If you need 'just' an Update - you could try using the DbMigrator.Update (this guy gave it a try http://joshmouch.wordpress.com/2012/04/22/entity-framework-code-first-migrations-executing-migrations-using-code-not-powershell-commands/) - but I'm not sure how relevant is that to you, I doubt it.
The scaffolding is the real problem (Add-Migration) which to my knowledge isn't accessible from C# directly via EF/CF framework.
Note: - based on the code in (http://entityframework.codeplex.com/SourceControl/changeset/view/f986cb32d0a3#src/EntityFramework.PowerShell/Migrations/AddMigrationCommand.cs) - and as the EF guru mentioned himself - that part of the code is calling into the System.Data.Entity.Migrations.Design library - which does most of the stuff. If it's possible to reference that one and actually repeat what AddMigrationCommand is doing - then there might not be a need for PowerShell at all. But I'm suspecting it's not that straight-forward, with possible 'internal' calls invisible to outside callers etc.
At least as of this post, you can directly access the System.Data.Entity.Migrations.Design.MigrationScaffolder class and directly call the Scaffold() methods on it, which will return you an object that contains the contents of the "regular" .cs file, the "Designer.cs" file and the .resx file.
What you do with those files is up to you!
Personally, I'm attempting to turn this into a tool that will be able to create EF6 migrations on a new ASPNET5/DNX project, which is not supported by the powershell commands.
I'm looking for a .NET coverage tool, and had been trying out PartCover, with mixed success.
I see that OpenCover is intended to replace PartCover, but I've so far been unable to link it with TypeMock Isolator so my mocked-out tests pass while gathering coverage info.
I tried replicating my setup for Partcover, but there's no defined profilename that works with the "link" argument for Isolator. Thinking that OpenCover was based on Partcover, I tried to tell Isolator to link with Partcover, and it didn't complain (I still had Partcover installed), but the linking didn't work - Isolator thought it wasn't present.
Am I missing a step? Is there a workaround? Or must I wait for an Isolator version that is friends with OpenCover?
Note: I work at Typemock
I poked around with the configuration a little bit and managed to get OpenCover to run nicely with Isolator. Here's what you can do to make them work together, until we add official support:
Register OpenCover profiler by running runsvr32 OpenCover.Profiler.dll (you will need an Administrator's access for this).
Locate the file typemockconfig.xml, it should be under your installation directory, typically C:\Program Files (x86)\Typemock\Isolator\6.0.
Edit the file, and add the following entry towards the end of the file, above </ProfilerList>:
<Profiler Name="OpenCover" Clsid="{1542C21D-80C3-45E6-A56C-A9C1E4BEB7B8}" DirectLaunch="false">
<EnvironmentList />
</Profiler>
Save the file, you will now have a new entry in the Typemock Configuration utility, called OpenCover. Press the Link button to link them. You will now be able to run your tests using OpenCover.Console.exe and Isolator. For example, here's how to run your tests with MSTest:
OpenCover.Console.exe
-target:"C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe"
-targetargs:"/testcontainer:"d:\code\myproject\mytests.dll"
-output:opencovertests.xml
There is still a minor issue running this with TMockRunner -link (that is, with late linking). I will need to look at it further at work.
Hope that helps.
I'm trying the sample demo of selenium flex API. After following the instructions on the main page for compiling the project with sfpi.swc and taking the generated selben.swf in bin directory and trying to run some test(assertFlexText) using Selenium IDE, I get the following error:
[error] Function getFlexText not found on the External Interface for
the flash object selben
I have tried several other flex tests and got error messages similar to the one mentioned above.
For some reason I believe that the generated selben.swf through the automatic build of project in flex builder is not the desired one, though it didn't indicate any build problem after including sfpi.swc.
Any idea?
I use SeleniumFlex Api and SeleniumIde for my projecy with excellent result BUT using my own version of each of one. Your error maybe is for not include the lib of SeleniumFlexApi in the compile time( -include-libraries "libs\SeleniumFlexAPI.swc" ).
After that u can enable capture and replay with SeleniumIde change the main source (read this post) and use the user-extensions.js (in the SeleniumFlexApi project) with the SeleniumIde user option. Its really easy.
With these change u can capture and replay in firefox (v 3.06 or minor) and after that, if u use java, u can use Flex-UI-Selenium, Flash-Selenium for ur integration test with SeleniumRC.
I hope this information be usefull. I u have any question let me know.