One of the useful features of ess-mode (Emacs speaks statistics) is to automatically replace the underscore _ with the assignment operator <-. Lately, I have been using a lot of pipes (written as %>%) and it would be great to not have to type three characters for each pipe.
Is it possible to define a custom key binding for the pipe, similar to the one converting _ into ->?
The simplest solution is to just bind a key to insert a string:
(define-key ess-mode-map (kbd "|") "%>%")
You can still insert | with C-q |. I'm not sure about the map's name; you'll almost certainly want to limit the key binding to ess-mode.
Check out yasnippet. You can use it to define something like "if this sequence of characters is followed by this key (which you can define to whatever you like), then replace them with this other sequence of characters and leave the cursor in this place". There's more to yasnippet than this, but there's plenty of documentation online and even already made recipes similar to the example I gave above that you can try, like yasnippet-ess-mode, for example.
Alternatively, you can also try abbrev-mode and see if that works for you.
I, for one, like yasnippet better, since you can also specify where to leave the cursor after the expansion, but abbrev-mode seems to be easier to set up. As always in Emacs world, try multiple solutions, don't settle for the first one you put your hands on. What works best for others might not work for you, and vice-versa.
Related
I work with knitr() and I wish to transform inline Latex commands like "\label" and "\ref", depending on the output target (Latex or HTML).
In order to do that, I need to (programmatically) generate valid R strings that correctly represent the backslash: for example "\label" should become "\\label". The goal would be to replace all backslashes in a text fragment with double-backslashes.
but it seems that I cannot even read these strings, let alone process them: if I define:
okstr <- function(str) "do something"
then when I call
okstr("\label")
I directly get an error "unrecognized escape sequence"
(of course, as \l is faultly)
So my question is : does anybody know a way to read strings (in R), without using the escaping mechanism ?
Yes, I know I could do it manually, but that's the point: I need to do it programmatically.
There are many questions that are close to this one, and I have spent some time browsing, but I have found none that yields a workable solution for this.
Best regards.
Inside R code, you need to adhere to R’s syntactic conventions. And since \ in strings is used as an escape character, it needs to form a valid escape sequence (and \l isn’t a valid escape sequence in R).
There is simply no way around this.
But if you are reading the string from elsewhere, e.g. using readLines, scan or any of the other file reading functions, you are already getting the correct string, and no handling is necessary.
Alternatively, if you absolutely want to write LaTeX-like commands in literal strings inside R, just use a different character for \; for instance, +. Just make sure that your function correctly handles it everywhere, and that you keep a way of getting a literal + back. Here’s a suggestion:
okstr("+label{1 ++ 2}")
The implementation of okstr then needs to replace single + by \, and double ++ by + (making the above result in \label{1 + 2}). But consider in which order this needs to happen, and how you’d like to treat more complex cases; for instance, what should the following yield: okstr("1 +++label")?
I have to use Textpad in my environment. To treat a file (on a regular basis) it is necessary to make +/- 20 replacements, some of them regex, some of them not. For most of the replacements I have defined macros (for each replacement one macro, i. e. 1:1). It is possible to "concat" macros or put replacements "in a sequence"? If it is possible: Would this sequence break, if one replacement does not find matching patters (off course, it should not break).
I'm not sure how you would "concat" them aside from recording each macro together (unless you know how to concat the files)... but as your question is about "would it work"... then I'd say yes but you would have to ensure each marco started in the right place.
I'd recommend each macro started and ended with something like Ctrl+Home to ensure a consistent starting / ending place
For example, I have many HTML tabs to style, they use different classes, and will have different backgrounds. Background images files have names corresponding to class names.
The way I found to do it is yank:
.tab.home {
background: ...home.jpg...
}
then paste, then :s/home/about.
This is to be repeated for a few times. I found that & can be used to repeat last substitute, but only for the same target string. What is the quickest way to repeat a substitute with different target string?
Alternatively, probably there are more efficient ways to do such a thing?
I had a quick play with some vim macro magic and came up with the following idea... I apologise for the length. I thought it best to explain the steps..
First, place the text block you want to repeat into a register (I picked register z), so with the cursor at the beginning of the .tab line I pressed "z3Y (select reg z and yank 3 lines).
Then I entered the series of VIM commands I wanted into the buffer as )"zp:.,%s/home/. (Just press i and type the commands)
This translate to;
) go the end of the current '{}' block,
"zp paste a copy of the text in register z,
.,%s/home/ which has two tricks.
The .,% ensures the substitution applies to everything from the start of the .tab to the end of the closing }, and,
The command is incomplete (ie, does not have a at the end), so vim will prompt me to complete the command.
Note that while %s/// will perform a substitution across every line of the file, it is important to realise that % is an alias for range 1,$. Using 1,% as a range, causes the % to be used as the 'jump to matching parenthesis' operator, resulting in a range from the current line to the end of the % match. (which in this example, is the closing brace in the block)
Then, after placing the cursor on the ) at the beginning of the line, I typed "qy$ which means yank all characters to the end of the line into register q.
This is important, because simply yanking the line with Y will include a carriage return in the register, and will cause the macro to fail.
I then executed the content of register q with #q and I was prompted to complete the s/home/ on the command line.
After typing the replacement text and pressing enter, the pasted block (from register z) appeared in the buffer with the substitutions already applied.
At this point you can repeat the last #qby simple typing ##. You don't even need to move the cursor down to the end of the block because the ) at the start of the macro does that for you.
This effectively reduces the process of yanking the original text, inserting it, and executing two manual replace commands into a simple ##.
You can safely delete the macro string from your edit buffer when done.
This is incredibly vim-ish, and might waste a bit of time getting it right, but it could save you even more when you do.
Vim macro's might be the trick you are looking for.
From the manual, I found :s//new-replacement. Seemed to be too much typing.
Looking for a better answer.
Standard common-lisp defines many reader macros such as ( and ) for grouping, ' for quote, " for string quotation, | for symbol quotation, # for dispatch macro, etc. Now I want to disable them all and use my own ones, and I have to call set-macro-character one by one to disable them all and then define my own ones.
I have found that there's one way to restore all reader macros to standard ones by calling (setf *readtable* (copy-readtable nil)), but is there a way to set them to empty(i.e., all the characters are treated as normal letters and numbers)?
I don't think there's a way. The expectation is that you're just making incremental modifications to the Lisp reader, not trying to replace it wholesale. It's not really designed to be used that way, because you can't define everything as a macro -- most of the constituent characters are associated with built-in behaviors that can't be defined as reader macros.
Am using the RODBC library to bring data into R. I have a long query that I want to pass a variable to, much like this SO user.
Problem is that R interprets the whitespace/carriage returns in my query as a newline '\n'.
The accepted solution for this question suggests to simply break up the text into chunks and then paste() together - which works, but ideally I'd like to keep the whitespace intact - makes it easier to test/verify the behavior of the query over in the database before pasting into R.
In other languages I'm familiar with there's a simple line continuation character - indeed, several of the comments on the accepted answer are looking for an approach similar to python's \.
I found an aside to a workaround using strwrap deep in the bowels of an R discussion lists, so in the interest of making the internet better I will post it here. However, if someone can point the direction toward a more elegant/straightforward solution, I will happily accept your answer.
I don't know if you will find this helpful or not, but I have eventually gravitated towards keeping my SQL separate from my R scripts. Keeping the query in my R script, except for very very short ones, I find gets unreadable very quickly.
These days, I tend to keep queries that are more than a single line in their own separate .sql file. Then I can keep them nice and formatted and readable in a nice text editor, and read them into R as needed via something like this:
read_sql <- function(path){
stopifnot(file.exists(path))
sql <- readChar(path,nchar = file.info(path)$size)
sql
}
For binding parameters into the queries, I just keep a %s where the parameter will go in the .sql file, and then add in the parameters in R using sprintf.
I've been much happier this way, as I was finding that cluttering up my R scripts with really long paste statements and multi-line character objects was making my code really hard to read.
R's strwrap will destroy whitespace, including newline characters, per the documentation.
Essentially, you can get the desired behavior by initially letting R introduce line breaks/newline \ns, and then immediately stripping them out.
#make query using PASTE
query_1 <- paste("SELECT map.ps_studentid
,students.first_name || ' ' || students.last_name AS full_name
,map.testritscore
,map.termname
,map.measurementscale
FROM map$comprehensive_with_growth map
JOIN students
ON map.ps_studentid = students.id
WHERE map.termname = '",map_term,"'", sep='')
#remove newline characters introduced above.
#width is an arbitrary big number-
#it just needs to be longer than your string.
query_1 <- strwrap(query_1, width=10000, simplify=TRUE)
#execute the query
map_njask <- sqlQuery(XE, query_1)
query <- gsub(pattern='\\s',replacement="",x=query)
Try using sprintf to get variable substitution, and then replacing all newlines and whitespace.
See my answer to a similar question for details.