I wrote application for linux which uses Qt5.
But when I am trying to launch it on the linux without Qt SDK installed, the output in console is:
Failed to load platform plugin "xcb". Available platforms are:
How can I fix this? May be I need to copy some plugin file?
When I use ubuntu with Qt5 installed, but I rename Qt directory, the same problem occurs. So, it uses some file from Qt directory...
UPDATE:
when I create in the app dir "platforms" folder with the file libqxcb.so, the app still doesnot start, but the error message changes:
Failed to load platform plugin "xcb". Available platforms are:
xcb
How can this happen? How can platform plugin be available but can't be loaded?
Use ldd (man ldd) to show shared library dependencies. Running this on libqxcb.so
.../platforms$ ldd libqxcb.so
shows that xcb depends on libQt5DBus.so.5 in addition to libQt5Core.so.5 and libQt5Gui.so.5 (and many other system libs). Add libQt5DBus.so.5 to your collection of shared libs and you should be ready to move on.
As was posted earlier, you need to make sure you install the platform plugins when you deploy your application. Depending on how you want to deploy things, there are two methods to tell your application where the platform plugins (e.g. platforms/plugins/libqxcb.so) are at runtime which may work for you.
The first is to export the path to the directory through the QT_QPA_PLATFORM_PLUGIN_PATH variable.
QT_QPA_PLATFORM_PLUGIN_PATH=path/to/plugins ./my_qt_app
or
export QT_QPA_PLATFORM_PLUGIN_PATH=path/to/plugins
./my_qt_app
The other option, which I prefer is to create a qt.conf file in the same directory as your executable. The contents of which would be:
[Paths]
Plugins=/path/to/plugins
More information regarding this can be found here and at using qt.conf
I tried to start my binary, compiled with Qt 5.7, on Ubuntu 16.04 LTS where Qt 5.5 is preinstalled. It didn't work.
At first, I inspected the binary itself with ldd as was suggested here, and satisfied all "not found" dependencies. Then this notorious This application failed to start because it could not find or load the Qt platform plugin "xcb" error was thrown.
How to resolve this in Linux
Firstly you should create platforms directory where your binary is, because it is the place where Qt looks for XCB library. Copy libqxcb.so there. I wonder why authors of other answers didn't mention this.
Then you may want to run your binary with QT_DEBUG_PLUGINS=1 environment variable set to check which dependencies of libqxcb.so are not satisfied. (You may also use ldd for this as suggested in the accepted answer).
The command output may look like this:
me#xerus:/media/sf_Qt/Package$ LD_LIBRARY_PATH=. QT_DEBUG_PLUGINS=1 ./Binary
QFactoryLoader::QFactoryLoader() checking directory path "/media/sf_Qt/Package/platforms" ...
QFactoryLoader::QFactoryLoader() looking at "/media/sf_Qt/Package/platforms/libqxcb.so"
Found metadata in lib /media/sf_Qt/Package/platforms/libqxcb.so, metadata=
{
"IID": "org.qt-project.Qt.QPA.QPlatformIntegrationFactoryInterface.5.3",
"MetaData": {
"Keys": [
"xcb"
]
},
"className": "QXcbIntegrationPlugin",
"debug": false,
"version": 329472
}
Got keys from plugin meta data ("xcb")
loaded library "/media/sf_Qt/Package/platforms/libqxcb.so"
QLibraryPrivate::loadPlugin failed on "/media/sf_Qt/Package/platforms/libqxcb.so" : "Cannot load library /media/sf_Qt/Package/platforms/libqxcb.so: (/usr/lib/x86_64-linux-gnu/libQt5DBus.so.5: version `Qt_5' not found (required by ./libQt5XcbQpa.so.5))"
This application failed to start because it could not find or load the Qt platform plugin "xcb"
in "".
Available platform plugins are: xcb.
Reinstalling the application may fix this problem.
Aborted (core dumped)
Note the failing libQt5DBus.so.5 library. Copy it to your libraries path, in my case it was the same directory where my binary is (hence LD_LIBRARY_PATH=.). Repeat this process until all dependencies are satisfied.
P.S. thanks to the author of this answer for QT_DEBUG_PLUGINS=1.
I tried the main parts of each answer, to no avail. What finally fixed it for me was to export the following environment variables:
LD_LIBRARY_PATH=/usr/local/lib:~/Qt/5.9.1/gcc_64/lib
QT_QPA_PLATFORM_PLUGIN_PATH=~/Qt/5.9.1/gcc_64/plugins/
Ubuntu 16.04 64bit.
I got the problem for apparently no reasons. The night before I watched a movie on my VideoLan instance, that night I would like to watch another one with VideoLan. VLC just didn't want to run because of the error into the question.
I google a bit and I found the solution it solved my problem: from now on, VLC is runnable just like before. The solution is this comand:
sudo ln -sf /usr/lib/x86_64-linux-gnu/qt5/plugins/platforms/ /usr/bin/
I am not able to explain what are its consequencies, but I know it creates some missing symbolic link.
Since version 5, Qt uses a platform abstraction system (QPA) to abstract from the underlying platform.
The implementation for each platform is provided by plugins. For X11 it is the XCB plugin. See Qt for X11 requirements for more information about the dependencies.
There might be many causes to this problem. The key is to use
export QT_DEBUG_PLUGINS=1
before you run your Qt application. Then, inspect the output, which will point you to the direction of the error. In my case it was:
Cannot load library /opt/nao/plugins/platforms/libqxcb.so: (/opt/nao/bin/../lib/libz.so.1: version `ZLIB_1.2.9' not found (required by /usr/lib/x86_64-linux-gnu/libpng16.so.16))
But that is solved in different threads. See for instance https://stackoverflow.com/a/50097275/2408964.
Probably this information will help. I was on Ubuntu 18.04 and when I tried to install Krita, using the ppa method, I got this error:
This application failed to start because it could not find or load the Qt platform plugin "xcb" in "".
Available platform plugins are: linuxfb, minimal, minimalegl, offscreen, wayland-egl, wayland, xcb.
Reinstalling the application may fix this problem.
Aborted
I tried all the solutions that I found in this thread and other webs without any success.
Finally, I found a post where the author mention that is possible to activate the debugging tool of qt5 using this simple command:
export QT_DEBUG_PLUGINS=1
After adding this command I run again krita I got the same error, however this time I knew the cause of that error.
libxcb-xinerama.so.0: cannot open shared object file: No such file or directory.
This error prevents to the "xcb" to load properly. So, the solution will be install the `libxcb-xinerama.so.0" right? However, when I run the command:
sudo apt install libxcb-xinerama
The lib was already installed. Now what Teo? Well, then I used an old trick :) Yeah, that one --reinstall
sudo apt install --reinstall libxcb-xinerama
TLDR: This last command solved my problem.
I ran into a very similar problem with the same error message. First, debug some by turning on the Qt Debug printer with the command line command:
export QT_DEBUG_PLUGINS=1
and rerun the application. For me this revealed the following:
"Cannot load library /home/.../miniconda3/lib/python3.7/site-packages/PyQt5/Qt/plugins/platforms/libqxcb.so: (libxkbcommon-x11.so.0: cannot open shared object file: No such file or directory)"
"Cannot load library /home/.../miniconda3/lib/python3.7/site-packages/PyQt5/Qt/plugins/platforms/libqxcb.so: (libxkbcommon-x11.so.0: cannot open shared object file: No such file or directory)"
Indeed, I was missing libxkbcommon-x11.so.0 and libxkbcommon-x11.so.0. Next, check your architecture using dpkg from the linux command line. (For me, the command "arch" gave a different and unhelpful result)
dpkg --print-architecture #result for me: amd64
I then googled "libxkbcommon-x11.so.0 ubuntu 18.04 amd64", and likewise for libxkbcommon-x11.so.0, which yields those packages on packages.ubuntu.com. That told me, in retrospect unsurprisingly, I'm missing packages called libxkbcommon-x11-0 and libxkbcommon0, and that installing those packages will include the needed files, but the dev versions will not. Then the solution:
sudo apt-get update
sudo apt-get install libxkbcommon0
sudo apt-get install libxkbcommon-x11-0
So, I spent about a day trying to figure out what was the issue; tried all the proposed solutions, but none of that worked like installing xcb libs or exporting Qt plugins folder. The solution that suggested to use QT_DEBUG_PLUGINS=1 to debug the issue didn't provide me a direct insight like in the answer - instead I was getting something about unresolved symbols within Qt5Core.
That gave me a hint, though: what if it's trying to use different files from different Qt installations? On my machine I had standard version installed in /home/username/Qt/ and some local builds within my project that I compiled by myself (I have other custom built kits as well in other locations). Whenever I tried to use any of the kits (installed by Qt maintenance tool or built by myself), I would get an "xcb error".
The solution was simple: provide the Qt path through CMAKE_PREFIX_PATH and not though Qt5_DIR as I did, and it solved the problem. Example:
cmake .. -DCMAKE_PREFIX_PATH=/home/username/Qt/5.11.1/gcc_64
I faced the same problem when after installing Viber. It had all required qt libraries in /opt/viber/plugins/.
I checked dependencies of /opt/viber/plugins/platforms/libqxcb.so and found missing dependencies. They were libxcb-render.so.0, libxcb-image.so.0, libxcb-icccm.so.4, libxcb-xkb.so.1
So I resolved my issue by installing missing packages with this libraries:
apt-get install libxcb-xkb1 libxcb-icccm4 libxcb-image0 libxcb-render-util0
I like the solution with qt.conf.
Put qt.conf near to the executable with next lines:
[Paths]
Prefix = /path/to/qtbase
And it works like a charm :^)
For a working example:
[Paths]
Prefix = /home/user/SDKS/Qt/5.6.2/5.6/gcc_64/
The documentation on this is here: https://doc.qt.io/qt-5/qt-conf.html
All you need to do is
pip uninstall PyQt5
and
conda install pyqt
Most of the problem of pyqt can be fixed by this simplest solution.
In my case, I needed to deploy two Qt apps on an Ubuntu virtualbox guest. One was command-line ("app"), the other GUI_based ("app_GUI").
I used "ldd app" to find out what the required libs are, and copied them
to the Ubuntu guest.
While the command-line executable "app" worked ok, the GUI-based executable crashed, giving
the "Failed to load platform plugin "xcb" error. I checked ldd for libxcb.so, but this too had no missing dependencies.
The problem seemed to be that while I did copy all the right libraries I accidentally had copied also libraries that were already present at the guest system.. meaning that (a) they were unnecessary to copy them in the first place and (b) worse, copying them produced incompatibilities between the install libraries.
Worse still, they were undetectable by ldd like I said..
The solution? Make sure that you copy libraries shown as missing by ldd and absolutely no extra libraries.
In my case missing header files were the reason libxcb was not built by Qt. Installing them according to https://wiki.qt.io/Building_Qt_5_from_Git#Linux.2FX11 resolved the issue:
yum install libxcb libxcb-devel xcb-util xcb-util-devel mesa-libGL-devel libxkbcommon-devel
Folks trying to get this started on Ubuntu 20.04 please try to run this and see if this solves the problem. This worked for me
sudo apt-get update -y
sudo apt-get install -y libxcb-xinerama0
I link all Qt stuff statically to the generic Linux builds of my open source projects. It makes life a bit easier. You just need to build static versions of Qt libraries first. Of course this cannot be applied to closed source software due to licensing issues. The deployment of Qt5 apps on Linux is currently a bit problematic, because Ubuntu 12.04, for example, doesn't have Qt5 libraries in the package repositories.
I had this problem, and on a hunch I removed the Qt Configs from my environment. I.e.,
rm -rf ~/.config/Qt*
Then I started qtcreator and it reconfigured itself with the existing state of the machine. It no longer remembered where my projects were, but that just meant I had to browse to them "for the first time" again.
But more importantly it built itself a coherent set of library paths, so I could rebuild and run my project executables again without the xcb or qxcb libraries going missing.
I faced the same situation, but on a Ubuntu 20.04 VM.
TL;DR: Check file permissions.
What I did:
I copied the Qt libs required to /usr/local/lib/x86_64-linux-gnu/ and added it to LD_LIBRARY_PATH
I copied the platforms folder from Qt to my application directory and added it to QT_PLUGIN_PATH
I ran ldd on the executable and in the offending libqxcb.so (ldd libqxcb.so), and it complains about some dependencies although ldconfig listed them as found.
linux-vdso.so.1 (0x00007ffee19af000)
libQt5XcbQpa.so.5 => not found
libfontconfig.so.1 => /lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007f7cb18fb000)
libfreetype.so.6 => /lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007f7cb183c000)
libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f7cb1820000)
libQt5Gui.so.5 => /usr/local/lib/x86_64-linux-gnu/libQt5Gui.so.5 (0x00007f7cb0fd4000)
libQt5DBus.so.5 => not found
I used export QT_DEBUG_PLUGINS=1 for further info. It complains about missing files, although they are there.
What I found:
For some reason, when copying to the VM through the shared folder the files permissions were not the correct ones.
Thus, I ran: sudo chmod 775 * on the libs and voilĂ .
I solved the issue through this https://github.com/NVlabs/instant-ngp/discussions/300
pip uninstall opencv-python
pip install opencv-python-headless
This seems to have been a problem with the cv2 Python package and how it loops in Qt
sudo ln -sf /usr/lib/...."adapt-it"..../qt5/plugins/platforms/ /usr/bin/
It creates the symbolic link it's missed. Good for QT ! Good for VLC !!
I tried to install Meteor on another system. Installation go well, then I copied my project and I am running meteor run but
"Extracting meteor-tool#1.4.0-1" it is happening forever. Then I tried to update version number to 1.4.1 and run again "meteor run". Now I do not need to install 1.4.0.1 so it worked but got stuck on extracting on other modules.
Possible reasons can be extraction program of this is release is faulty. Would someone suggest a solution or how can I download 1.4.0.1 release of meteor directly?
https://github.com/meteor/meteor/issues/7688
I found the answer of this problem. This is problem with tar extractor.
I installed the newest 7zip and renamed the tar.exe in my GIT program folder ("where tar" command in cmd revealed, that somehow that exe was associated with .tar archives) to tar.exe.old.
If you can not find where is tar then run "where tar" command to get path of tar.exe
This solves the problem.
Take a look at this answer: https://stackoverflow.com/a/40122752/6861101
Try adding the following to your local hosts file (C:\Windows\System32\Drivers\etc\hosts):
54.192.225.217 warehouse.meteor.com
Then run a meteor reset in your app directory (warning - will wipe your local DB), then try starting your app again.
This worked for me.
I'm trying to host a meteor app that uses an old version of meteor.
Every time i try to start the app it will get somewhat through the process of installing the tool, and then i see a message such as:
Killednloading meteor-tool#1.1.3... -
(note how killed somehow overwrites the downloading part of the command line)
Is there a reliable way to install the meteor tool at a specific version?
EDIT:
The Meteor team added a release parameter to their download endpoint. Now you can simply specify the desired version:
curl "https://install.meteor.com/?release=1.3.3.1" | sh
For Windows, a version parameter exists for the choco installer:
choco install meteor --version 1.3.3.1
Original solution
You can use sed for that. Insert it in the middle of curl and sh:
curl https://install.meteor.com/ | sed 's/1.4/1.3.3.1/' | sh
That will replace the release 1.4 (current version) to 1.3.3.1
When you create a meteor app you can specify a release:
meteor create test --release x.y.z
And when you update a meteor app you can do the same:
meteor update --release x.y.z
#Jorge Issa's answer is good if you are installing Meteor from scratch, on a system that never had Meteor installed, however it's subject to change since versions change all the time, so you need to adapt the sed line.
If you have any version of Meteor already installed, as Michel Floyd mentioned, you can always create a project with a specific version by adding the --release flag.
meteor update --release xxxx works fine with you're actually upgrading, but downgrading is a different story.
My recommendation when it comes to upgrading and eventually downgrading, is to use version control (git).
Attempt upgrade and if all is fine, you're in good shape, if not and you want to downgrade, simply clear the file changes in your version control system and use meteor reset to clean your project and rebuild with the previous version.
!Note! meteor reset clears the local mongo database too, so be sure to back that up first if you're going to do that (check mongodump and mongorestore for that)
finally, if you're looking to clean up the clutter from the .meteor folder, you can delete the folder and then run meteor reset in your project: the meteor executable will detect you don't have the needed packages will re-download the packages for the version needed by your project. (This takes a while and if you have many project, can be cumbersome as you need to do this in each project, but if like me you are looking to clear some space, this works fine.)
Try:
meteor update --release x.y.z
Try
choco install meteor --x86 --params="'/RELEASE:1.5.4.4'"
I created a new meteor app using meteor create, including bootstrap and coffeescript.
Then I added the following packages:
sudo npm install -g meteorite
mrt add filepicker
sudo mrt add xml2js
All is well at this point. I can start the app and see Hello World just fine.
Then I try to add the csv package:
sudo mrt add node-csv-npm
Install goes well, but when I go to start the app, in the terminal, it hangs at "Starting your app."
Open to any ideas.
Thanks!
This is not tied to the node-csv-npm package, I had the problem with another one that was working great an hour ago, but needed to be re-added due to branch merging. Unfortunately, the only solution I've found is a brutal one:
Remove all traces to the package from packages folder, smart.json, smart.lock and packages/.gitignore to be sure.
After that, manually add package/packagename folder with source of the package.