I have created a table view in javafx for my custom object. I have enabled multiple selection in the code by doing:
table.getSelectionModel().setSelectionMode(SelectionMode.MULTIPLE);
Randomly I observe that when I select all the items by pressing Ctrl+A, one of the items is returned as null among all the selected items. Not sure why this happens.
I use below line to fetch all items:
ObservableList<MyObj> selectedItems = table.getSelectionModel().getSelectedItems();
Any suggestions?
Apparently it's a bug, already fixed for version 9 (and also 8u112, if I understand correctly): https://bugs.openjdk.java.net/browse/JDK-8144501
A workaround for now is to use getSelectedIndices(), then get the items corresponding to these instances from table.getItems()
Related
We have a hierarchical watch app.
The root controller is a table of menu items. That list of items is controlled by a server. The data is retrieved and stored in core data. The menu is populated the first time going into the app.
But I want this table to stay current. My thought was to add code to willActivate to check if there was changes, and reload the table. In my reload logic I call the same function I called the first time, which sets the menuTable.setNumberOfRows and creates each row. Looking at what I'm putting in the logs, it is going through this logic with a different count of rows and new labels. But the app on the watch shows the table with the old data.
How can I get this table to reload with the new information?
I've had this problem too and as rmp says, it still seems to be a bug in watchOS 1.0.1. The problem appears when you try to reload your tableView after run willActivate() and nothing will happen.
In my case, I reload the tableView after receive a reply from a delegate and then I reload all the content just if it's necessary. To achieve this, I remove all rows from a NSIndexSet and load again.
if isNecessary {
self.table.removeRowsAtIndexes(NSIndexSet(indexesInRange: NSMakeRange(0, maxItems)))
isNecessary = false
}
I've tried a lot of tricks but none has worked for me:
Force to reload rows by table.setNumberOfRows(0, withRowType: "data")
Setting parameters to empty text before assign new values
One thing you could do is to hide tableView before removing rows, and avoid the remove animation.
It is a bug in WatchKit. Seems like Apple doesn't handle the repetitive interface object correctly.
The general principle here is: Only insert or remove necessary rows after a table is created. Do not reload the whole table like what we usually do in iOS. It just doesn't work (or trigger the bug).
So specifically, you have to:
Do this in willActivated method. This is correct.
If this is the first load, before the table is even created, do what you are now doing – load all table rows.
For all following times, don't reload the table, fetch the new data and check the desired number of rows.
Compare with the current number of rows in the table, insert to or remove from the bottom of the existing table.
Now simply re-assign the new data to all existing rows. Again, do not reload.
It should work if you follow the above steps.
I have found what works best given the current state of watchkit is to remove all rows then re-populate the table.
Try something like this:
- (void)loadTableData{
//clear the table
[mainTableView setNumberOfRows:0 withRowType:#"myTableRow"];
//set the row count again
[mainTableView setNumberOfRows:numberOfRows withRowType:#"myTableRow"];
//populate table
}
Its pretty simple. As Apple hasn't provided any method to reload the data.
You can still achieve that by simply populating the rows for the tableview.
Below is the sample code:
for index in 0..<tracksTableView.numberOfRows {
if let controller = tracksTableView.rowController(at: index) as? EditPlaylistRowController {
controller.playingTrackId = self.playingTrackID
controller.sharedTrack = trackItems[index]
}
}
Use it whenever you want to refresh the data.
NOTE:
You can still make some conditional statements inside the row controller class.
Happy to help :)
I'm trying to implement multiple record selection feature on a grid.
It is very similar to http://www.tek-tips.com/faqs.cfm?fid=3831
It adds an extra column with check boxes. I want those check boxes!!
But it depends on a extra logical field in the underlying table. It need to create a class clscheck which inherits CHECKBOX. I'm not sure why this CLICK procedure is needed for the checkbox.
PROCEDURE CLICK
IF DODEFAULT()
KEYBOARD '{DNARROW}'
ENDIF
ENDPROC
When I removed it, row selection did not work correctly as expected. Why this?
Here is my requirement:
1) I don't want to add an extra logical field in the underlying table.
2) To work with controls in the grid, I think AllowCellSelection must be .T. I want AllowCellSelection = .F. because I don't need to work with any control in the grid except the check boxes. I need to work only with check boxes. The other columns will be read-only.
3) Can I have selected list without the logical field in the underlying table?
4) Can I remove the usage of KEYBOARD '{DNARROW}'?
In fact, I have a grid which is AllowCellSelection = .F., but it only provides single selection.
I need to enhance it with multiple selection, thus, I just want to add an extra column with check boxes so that user can know he can select multiple records.
No need Shift+Click or Ctrl+Click which is not familiar with idiot users.
I have found this - http://www.tek-tips.com/faqs.cfm?fid=433
It also depends on an extra logical field and it depends Shift+Click and Ctrl+Click.
What you are seeing is quite common for multi-select grids. I've used them SIMILAR to this in the past. However, you are afraid of the extra column in the underlying table. That may/not be true. You don't always have to update the ORIGINAL table, but a temporary CURSOR you are presenting to the user. Ex: If you want to display a list of employees in a table. No, you don't want to keep adding this column to the original employee table as then anyone else trying to do multi-select could falsely get your selection. However, if you pulled into your own local cursor and presented to the user, then no problem. Example...
Thisform.YourGrid.RecordSource = "Employees"
(bound directly to your employee table -- not necessarily the right thing)
vs
use in select( "C_MultiPickEmployees" )
select ;
.F. as IsChosen, ;
E.* ;
from ;
Employees E;
into ;
cursor C_MultiPickEmployees READWRITE
Thisform.YourGrid.RecordSource = "C_MultiPickEmployees"
NOW, you have your extra column without dealing with issues to the underlying table. If you wanted to further filter what you were showing -- such as employees for a certain division/department, then just add that to a WHERE clause, add an Order By if so needed and you are good to go.
As for the "Allow Cell Selection", I've never had to deal with that. I just add a "checkbox" to the first column and set
Thisform.YourGrid.Column[1].CurrentControl = "CheckBoxControl"
(based on the name it is added to the column).
Then, set the column 1's "ControlSource" = "C_MultiPickEmployees.IsChosen" and you should mostly be done.
As for the "CLICK" event trying to force the down arrow. This is more for automatically scrolling to the next record so you can just click, click, click for multiple entries.
Hope this helps clarify things for you.
How can I check if multiple rows have been selected in a grid?
In Dynamics Ax, there a multiselect property that disable button if multiple records have been selected, does the "opposite" exists?
Meaning activating a button only if multiple records have been selected, how can I do this through code?
Unless that kind of property exists, it seems you have two things here :
check if multiple rows are selected
check it every time the selection changes
Checking for multiple selection
Have a look on axaptapedia : Multiple grid selections to count the selected records.
Checking on selection's change
Look at the InventTable's form where buttons are activated depending on the selection being a bom or not.
Form's methods handling buttons activation like setBOMRouteEnabled are called from datasource's method active.
Following this model you can check for multiple selection on selection's change.
The best way to detect this would be like this:
FormDataSource fds = salesTable.dataSource();
if (fds.recordsMarked().lastIndex() > 1)
info("Multiple records selected");
else
info("1 or 0 records selected");
I am trying to build a 6x6 grid layout. In each cell, there will be an input check box. I want to bind the checkboxes to my backing bean in a "consecutive fashion"...meaning, I would like to be able to iterate over the checkboxes to see whether they are checked or not. Basically, there must be an underlying data model. For example, you can drag over and drop off as a table, any item in the data control palette. Then in my application module, I can modify the view object as I wish before I save to the database. Now if I have a table with 36 rows and two columns (one is Id, one is Numeric (1 or 0)). I would like to drag over that table and drop off as a Grid that will enable a user to update each of the rows by selecting or 'un-selecting' a checkbox.
Try to use for each or Iterator component. They iterate over some array/collection and repeat elements enclosed within those components. You can check how Oracle does Dynamic Table (when you drag view object instance from application module to a page, choose dynamic table option) to get and idea.
try :
http://jobinesh.blogspot.com/2010/06/model-driven-approach-for-building.html
http://blogs.oracle.com/shay/2010/10/adf_faces_dynamic_tags_-_for_a.html
also try google with "dynamic form adf"
I have a need here regarding multiple selection of items in the QTreeView. I have two widgets, QTreeView on left and another QGLWidget on the right. If I do a multiple selection, I must highlight the items in the glwidget. Vice versa, I need to highlight the items in the tree view if multiple selection is done on the glwidget. Currently, I am able to update single item by setting the current index of the tree view. Any ideas on how to update the selection of multiple items on the tree view with multiple selection on glwidget?
You can use the tree view's item selection model (treeView->selectionMode(), of type QItemSelectionModel). It has a signal selectionChanged() you can connect to to receive tree view selection changes and apply them to the GL view.
When receiving selection events from the GL view, you can use QItemSelectionModel::select() to propagate them to the tree view.
To enable multiselection on your treeview, call setSelectionMode( MultiSelection ).
Frank was faster, but I still post my (untested) code example for adding an item to the current selection:
treeView->selectionModel()->select(
treeView->model()->index(row, column, parent),
QItemSelectionModel::SelectCurrent);
There are other selection modes too, see the QItemSelectionModel reference. SelectCurrent is a short-hand for Select | Current, so means update current selection by selecting the given items. It does not mean "select as current selection" (replacing previous selection).
In Python (PyQt6) I do :
ui.my_treeView.setSelectionMode(ui.my_treeView.selectionMode().MultiSelection)
It works well.