Brand spanking new to foundation 4,
I've installed all dependancies, compass, sass, and zurb-foundation.
ran compass create testproject -r zurb-foundation --using foundation --syntax sass
... worked fine.
ran sass --watch sass:css in the testproject directory and I keep getting errors like so...
error /Users/figmints/Sites/testssss/sass/app.sass (Line 5: File to import not found or unreadable: normalize.
Load paths:
/Users/system/Sites/testproject
/Users/system/Sites/testproject/sass)
In the config.rb, the first line is require 'zurb-foundation'
Isn't this supposed to make the file normalize.scss visible to the project so that I do not have to copy each file located in my gems folder?
Could anyone direct me towards my mistake, please?
Thanks,
Seth
As far as I know, there's no sass watch. What you need to do is:
Navigate to your project's root folder (which is where your Compass project's config.rb should be) through your terminal
Type compass watch and hit Enter
See the magic happen (if you have nicely configured your config.rb, that is)
A Compass project should be watched by Compass. The watch function is why—IMO—Compass is so nice: it does something Sass naturally doesn't do.
Have you tried compiling using compass watch in your testproject root directory, instead of compiling with Sass? Because you created your project with Compass, so you should use Compass to compile.
Related
I installed Bootstrap CSS with SASS from the following repo:
https://github.com/twbs/bootstrap-sass
I ran the command "bower install bootstrap-sass" on the command line and this successfully installed the folder bower_components on my project folder. (Incidentally - I have nothing else present yet, I want to learn to bootstrap the CSS compiling first).
OK, here's what I want to accomplish:
I want to be able to add .scss files to the folder I create called resources/assets/sass/
I want to provision/manage so that .scss files I add to this directory are in turn compiled to public/build/css/that_file_name.css
More practically, I would like to compile all of the .scss files into one large .css file.
My question(s) are:
What does the compiling?
How do I instruct it to compile the .scss files in the folder above in the public/build/css/ folder?
Must I configure new .scss files or can I set it so as to just add them to that sass folder?
Bonus, how do I tell it to minify the output file, or not (so I can experiment with both ways)?
What does the compiling?
Compiling Sass files transforms stylesheets with Sass-specific syntax like selector nesting and mixins into normal CSS that can be parsed by browsers.
How do I instruct it to compile the .scss files in the folder above in the public/build/css/ folder?
Since you're already using Bower which is a Node.js package, I assume that you have no problem using the Node.js package node-sass instead of the original Ruby version.
First, install the package using npm i -D node-sass. Then, create a new script inside your project's package.json:
"compile-sass": "node-sass resources/assets/sass/main.scss public/build/css/main.css"
main.scss is now your entry point where you import Bootstrap and your other stylesheets.
// I don't know whether this path is correct
// Just find out the location of "_bootstrap.scss" and then create the relative path
#import "../../../bower_components/bootstrap-sass/assets/stylesheets/_bootstrap.scss";
/* Your custom SCSS */
Finally, to actually run the compilation, execute npm run compile-sass in your terminal.
Must I configure new .scss files or can I set it so as to just add them to that sass folder?
Since you never tell node-sass to "compile everything inside this folder" and instead use an entry point file (main.js), when you want to include a new file you simply add an #import directive with a relative path to it.
Bonus, how do I tell it to minify the output file, or not (so I can experiment with both ways)?
To minify the resulting main.css file, I recommend csso. You can install its CLI package using npm i -D csso-cli and then add another script to your package.json:
"minify-css": "csso public/build/css/main.css public/build/css/main.min.css"
You can then run that script using npm run minify-css. The minified file will be outputted as main.min.css.
For all the question asked, the answer can be found above. But if you are just looking to compile .scss file to .css using command line, use below,
sass source/stylesheets/index.scss build/stylesheets/index.css
Make sure you have "node JS/npm" and Sass compiler installed.
If not, use this to install Node.js and npm - https://www.npmjs.com/get-npm
And use this to install Sass - https://sass-lang.com/install
Enjoy ;)
I keep trying to run sass --watch scss:css on a directory and unfortunately, the scss files are not compiling.
SASS does confirm that it's watching for changes, but I've noticed that it is looking in my Program Files directory.
My project with the actual SCSS and CSS files is in my C/username/documents/project/assets directory. If I try to enter that path explicitly in the sass --watch command, I get an error message.
How can I specify the correct directory so SASS will stop trying to compile my files in Program Files?
First make sure your sass is working well and you can try below option for compiling into different folder.
sass --watch input-dir:output-dir
I have been using Sass for about half a year now and have absolutely fell in love with sass --watch.
Just recently (I believe after I updated Sass to 3.4.5), I am unable to get standard functionality out of the --watch option.
My directory structure exists like this:
Desktop
-parent
--project
---css
As you can imagine, I'm trying to watch the "css" folder. My command has always been sass --watch Desktop/parent/project/css. I even tried other things such as sass --watch Desktop/parent/project/css:Desktop/parent/project/css to see if that would work, but it didn't.
Any shove in the right direction would be appreciated. I just don't understand why this suddenly isn't working.
Sass is 3.4.5 and I just updated ruby today to this ruby 2.0.0p481 (2014-05-08 revision 45883) [universal.x86_64-darwin14].
In case anyone else encounters this problem, I have found a workaround by simply navigating to the directory I want to watch (via Terminal) and then executing a watch on the current directory like so: sass --watch ./.
I'm new to SASS and as such ran sass --watch dir on my /scss directory.
Then I discovered Compass and ran compass watch on the same directory.
Now when I edit style.scss, the compass watch updates the /css/style.css file as expected, and the sass watch creates a new style.css alongside the style.scss file (which is unwanted).
I managed to cancel the compass watch with Ctrl+C. However even after a full system restart the sass watch still seems to be active. I.E. it's still creating style.css in the /scss directory.
How can I stop it?
I've solved the problem.
Its turns out I had the Sublime Text SASS Build Package installed which was running all along.
I've uninstalled that and now everything is as it should be.
Doh!
Oh ! You don't have to use Sass and compass at the same time dude.
Compass is a SASS extension, so you can use it alone.
Personally i advice you to learn SASS first so forget Compass for few months.
For the directory problem it's simple. Open your terminal go into the folder youre working.
Image you have a folder named site1 with a sass and a css subfolder. Go into your the site1 folder and run :
sass --watch sass/style.scss:css/style.css
And normaly it should work :)
I'm trying to use SASS for the first time with textmate. I seem to have installed it correctly by following the instructions on the git page - https://github.com/MarioRicalde/SCSS.tmbundle
but I can't find any information on how I can now use it.
When I make a .sass file the new Sass syntax is highlighted but when I save it is not compiled. Am I missing something?
Make sure to open up Terminal and in the command line, navigate to your project folder and run this command:
sass --watch style.scss:style.css
Name your working file style.scss, and it will compile and generate and update the style.css file that you reference in your document head.
Also make sure you have installed the Sass gem within your project directory :)
gem install sass
UPDATE
The bundle is only for installing syntax highlighting in Textmate. Sass is a precompiler for CSS, so it generates CSS from what you write in Sass. This is done through the sass --watch command above in the command line.
Read more on how to use and install Sass.