If I wanted to create a flickable looping page menu basically like the Symbian home screen, what element would I use a possibly how would I use it?
I have tried creating "page" elements in QML and then creating a flickable element with 3 pages on, when you flick the pages are changed according to a list and then the fickable is centered allowing you to loop through the pages but it isn't nearly as smooth as the native Symbian home screen. It doesn't finish the flick to the next page automatically; it also doesn't detect slow flicks which results in the pages not being changed and centered meaning you have to flick in the other direction and then back. It is also a bit confusing having to make the page on the flickable equal to another one on the list so I would like to be able to place all the pages on the element instead of having to swap pages. I haven't actually figured out how to swap pages yet as I am just still experimenting with colored rectangles and have noticed the above problems.
I think I should rather use something like Listview but I can't figure out how. If you have any idea's or experience with this, please help!
Yes, you should be using a ListView. With snapMode set to ListView.SnapOneItem.
Related
I need suggestions in building below UI. It's a carousel like structure where active over is highlighted in green and we can still see next overs disabled or gray color.
I have researched for this for ex. Can I make use of any carousel to fit this design but can't seem to come to any conclusion. Thought of slider also but did not see that fitting this design.
Guys, do you have any suggestion or pointers to get me started here. I do not need code; just want a startup point. So far I am stuck with carousel or slider.
I understand this might not be most constructive question on SO but any pointers will be highly appreciated.
Unfortunately, you didn't provide any information about what should happen when you click on these items. If I understand correctly, you are looking for a carousel supporting your own pager design. If this is correct, you must add the pager markup first, after that you can use any carousel that supports slide switching methods. Then you can add click event listener to your pager items and call switching method in the listener, setting by that a new slide corresponding to the pager element index.
For example, you can try slick carousel, as it has .slickGoTo() method, which you can use to switch slides programmatically. You can also try to customize slick's default pager, but it might be not so easy or even impossible at all.
I developed a CSS-based layout for a web application that has been locked down and awaiting back-end integration. The primary element on the page is a timer/clock.
As originally intended, the timer is just a timer and is very simple. It looks like this:
Now, the boss has asked me to make a pretty significant change to my design. They want 3 tabs to hang off the bottom of the clock. They did not want this before, so I didn't build any show/hide logic and I didn't build tabs under the clock either. I am also slightly concerned because the tabs are at the bottom of the clock - that seems like a point of curiosity but I am guessing it is not huge problem either. Clicking on any of the tabs needs to cause the tab that was just clicked on to have focus, and it would cover the black rounded rectangle and display information about the tab the user clicked on. It would cover the clock. I would describe their request as reasonable, but I wish I'd had this requirement when I was coding. I think it sounds like a relative of a show/hide toggle. This is how they want the tabs to look, and where they want the tabs to go:
The part I am getting stuck on is how to slipstream something like this into what I've already created for the clock. Effectively they need me to make that component much more interactive, as the tabs have quite a bit of functionality within them. There are 3 tabs that I envision needing, but the mockup only shows 2, and that's ok.
I've included a few images in this post and I hope it helps. I've spent nearly a week smashing my head against this and I am stuck. To sum it up, I need to introduce (or shoehorn) a show/hide component as part of a late-hour change.
I am decent with CSS/JS/Web dev, but this is my Achilles heel. By "this" I mean taking a part of the UI that I already created and making it behave totally differently. In this case a pretty simple timer needs to change and has to have tabs at the bottom of the clock that would cover the clock itself when clicked. I hope I was clear enough in this question.
You have a very simple way to resolve this, using JQuery (you can use Javascript on it's own, but this will make it easier for you, less writing).
The give an ID to the DIV where you have the HTML for the clock, move the entire HTML content into a declaration like this:
$("#myDivId").html("put all the HTML content here, don't worry with the size of it");
you just need to change the HTML based on what you want to display. For easier implementation you can create a variable for each different content options, like this:
var myFirstHtmlBlock = "<p>blah blah blah</p>";
var mySecondHtmlBlock = "<span>Anything else...</span>";
and then change the content using those variables:
$("#myDivId").html(mySecondHtmlBlock);
Just let me know if this sorted out your issue.
I'm new to Qt.
I have a Qt main window which has some information inside.
I can only fill in limited pieces of information in the window. If I have more information, then I should have a "NEXT" tab/button, to go to a next page, within the same window, and a back button.
Also, there is some static information which is to remain the same across all Pages/Tabs.
So, what I wish to ask is..how do I limit the information to let's say..only 10 lines in a page, and if more, it should go to the next page, within the same window, and be able to switch between them? And how to keep the permanent content across all Pages.
Please help. Thanks.
Something like a Wizard? See http://qt-project.org/doc/qt-4.8/dialogs-classwizard.html
The examples in the Mainwindows section are very good
I am going to write an application that uses QT4 (with C++ or python it isnt important in that moment).
One of functionality is "Showing all items in database".
One item has a Title, author, description and photo (constant size)
And there could be very many items. Let's say 400. There won't be enough space to show'em all at once time.
One row will have 200px, so i need at most 4 for once time.
How to paginate them? I have no idea.
I can use limit and offset in SQL queries, but how to tell window: "that's 5th page"?
Any solutions?
First off, you normally do not want to use any manually set pixel widths in any GUI application, if you do, your toolkit sucks (or you must work in game development).
Second off: be more specific.
You'll need to define "page" for your application, namely what a page should be in its context. I assume it is breaking a list of items into separate pages. Normally this is done by using one of the view classes (e.g. QListView or QTableView) to take care of much of the legwork: it's called a scrollbar (not to mention the collapsing folders concept from file managers). Another method is splitting the information across several tab pages (QTabWidget), where each page displays a view of some sort (Perhaps QTextView or one of the M/V or Item view classes).
Same thing can also be done using your own widget stack and some other widget to manipulate the currently displayed page. This is basically how the option dialogs in the TeamSpeak 3 client and most KDE apps work; it's also how wizards with back/next buttons work in concept. I suggest you take a look at this config dialog example
Normally what you want is a view with a scrollbar and or some form of collapsing related entries into categorised information. If you just want to display a list of pages where each page is X entries: use a tab widget or stacked widget.
How do I switch between the two screens on the Qt?
For example, I have a button - static text plus a toolbar. Now I will add it to a frame and set it as a central widget. It works well for one window. What if I move it to the next window? Then I need to show some other stuff like another button, some images etc... and what if I come back to the first view again?
How do I show my old widgets back?
I'm not sure I got your problem right but, you could have different scenarios :
You could simply use groupboxes... Some widgets in groupbox1, otherWidget in groupbox2, and you display the groupbox you want to use, hiding the others...
You could use stackedWidget, which simulates "pages" of widgets stacked on top of eachothers... more informations here : http://qt.nokia.com/doc/4.6/qstackedwidget.html.
You could use other way like using tabs : http://doc.trolltech.com/4.6/qtabwidget.html
Maybe this example would be useful to you : http://qt.nokia.com/doc/4.6/dialogs-configdialog.html
Hope it helps a bit !
I'd recommend checking out Animation/States example (should be in /qt/examples/animation/states/ subdirectory of your Qt installation). It shows how to combine state machine representing application logic with presentation layer and get cool animation effects for free (of course if you don't need eye candy, you can set widgets properties without any animation).