I have a group of div box's that will be displayed at different times based on what is clicked. It needed to be animated to slide down. For this, I change the height of the each div at a certain time, then the CSS3 Transition takes over and eases it down.
Now at the moment, if I provide the height for the box to change to, it works fine, but I can't always provide that as the content is dynamic and may be however tall. But when I define auto as the height, then the transition takes it up to 0, then sizes to the content. How can I get it to instead of slide to 0, slide to the height of the div based on the content?
sadly after much searching, found out that its not possible to do it to auto, but my solution was to find the inner element (the p element which was changing) and used the clientHeight added with any other constant's and used that as the defined new height. Bit busy, but it works nicely.
Related
strong textSeems like a common problem, but in my case it's complicated by a few extra requirements, so what I found on SO and MDN didn't lead me to a full solution.
Simple premise:
Horizontal nav bar, full width of the page, semi-transparent background, variable number of tabs (extra space filled with same background as tabs).
Easy, right? Give the container element rgba background, set nav items display:inline or float them left and you're golden.
Complication 1: Active tab has to have a triangular cutout (see pic).
Ok, I can have a cutout by setting background-image to a png with transparent bit. The background of the parent element would get in the way - so set background to individual elements instead of parent.
What about the variable width "empty space" past the tabs (see pic)? Ok, put an empty element with a larger than life width, and cut it off with overflow:hidden on the parent.
Complication 2:
Buttons need tooltips on hover.
Ah, the thrill! The suspense! overflow:hidden won't do unless I put tooltips outside of nav div altogether (which would probably work - but seems smelly).
So, here are a few things I tried:
Old implementation which doesn't have the "filler" element width problem but clips off half a tooltip (with overflow:hidden):
http://codepen.io/istro/pen/aHcdi
Messing with display:table seems to give little control over how display:table-cell div width is decided, also needs content to display the div in the first place. Content can be moved away, but still no good (didn't even add a tooltip here):
http://codepen.io/istro/pen/uIcfn
Messing with floats (tooltip sorta where I'd want it to be more or less), but clueless how to make the last "filler" element fit remaining width:
http://codepen.io/istro/pen/aIGxB
So the question - how could I make a div to fill the remaining width with CSS only? Or perhaps I'm asking the wrong question altogether, in which case what ideas would I use to implement it cleanly?
Thanks!!!
I have a div element with to resize:vertical style on it. The contents of the div are generated, so it could be empty or filled. The div needs a max height, so that the height increases as new items are added, but it caps the size at 150px and makes the div scrollable.
I could easily accomplish that with the max-height style, but if I want to resize it, it doesn't work.
The second idea I had, was to just use the height style, but by doing this, the div's not adjusting its height if the contents are smaller than 150px.
Is there any way of doing this without javascript?
I don't think this is possible without JavaScript and even if it would be: What do you want this for? Please take a look at browser support of resize!
(What do you mean by "filled" - is this done via PHP or JS? Actually no matter which one you use, you could check if there is any content and if so add an .empty class to the div)
Please visit website: http://viewlike.us/ and change resolution to e.g. 1920x1200 - in mostly cases header (div with input form and submit button ) is not anymore 100%. How to avoid this situation? Ive tried to use width:100% !important, min/max width - but without success. I suppose there should be a small trick/fix or sth to avoid it but Im struggling with lack of ideas.. thanks~!
I think the default value for the width property is auto for most elements. And in this case, the <div> is expanding to 100 percent of its parent element, which in your case is <body>. Since the <body> tag has no width defined, it will default to 100 percent of the browser window. So even though the width of the page located below the resolution selection bar is greater than the browser window's width, the top bars (URL entry and resolution selection) still have the width of the browser window. That is why you see the edge of them when you scroll to the right.
You might want to experiment with using position: fixed in combination with the CSS properties top and left for your top bars. That way, those bars will be on-screen even when you scroll the page to the right. (I tried that breefly and it should work.)
I hope that helps you!
I'm trying to find out why this CSS3 transition affects the parent div:
http://jsfiddle.net/BpUqt/5/
I'm trying to move an object up inside a div without changing the height of its parent div.
But what happens is that the height of the box shrinks by 1px each time the transition begins/ends (with or without border)
While I want to use three of these in a row my content beyond begins to jump up too if the user hovers over these items very quickly.
Setting an fixed height is not an option since I'm working on an responsive layout.
Instead of animating margin (which means the box height needs to be recalculated, so rounding errors on partial pixels causes movement), use transforms.
Also, remember that IE10 has transitions, so use the ms prefix as well.
Have a look at http://jsfiddle.net/BpUqt/10/
Ok, here's a simple work-around. Simply add a negative margin and it works:
http://jsfiddle.net/BpUqt/12/
Here's how it actually looks like (minimal version):
http://jsfiddle.net/sSjQt/
How do I create a scroll in GridView using ASP.NET without using fixed sized div's around it like shown here http://www.aspnettutorials.com/tutorials/controls/gridviewscroll-aspnet2-csharp.aspx .
You can set the div's width or height to a percentage as well, and with overflow:auto, the div contents will scroll if the browser is sized to less than the content.
Without any size settings, your div will simply expand to hold all content, so a percentage, fixed, or inherited size in at least one dimension is required for scrolling to ever occur.
In order to get a scroll bar, you need a fixed height container with overflow set to scroll.
Whether you do it with the grid's properties, like in the example you linked, or by just wrapping it in a Panel with a height and overflow set on it, it doesn't matter much. The key thing is just to get it inside a fixed height container. How you want the UI to look (where the scrollbar is, etc.) will dictate where you create the div.