I now have a full path for a file as a string like:
"/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/TRN_282C_HYD_MOD_1_Drive_Shaft_Rev000.xml"
However, now I need to take out only the folder path, so it will be the above string without the last back slash content like:
"/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/"
But it seems that the substring() function in xQuery only has substring(string,start,len) or substring(string,start), I am trying to figure out a way to specify the last occurence of the backslash, but no luck.
Could experts help? Thanks!
Try out the tokenize() function (for splitting a string into its component parts) and then re-assembling it, using everything but the last part.
let $full-path := "/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/TRN_282C_HYD_MOD_1_Drive_Shaft_Rev000.xml",
$segments := tokenize($full-path,"/")[position() ne last()]
return
concat(string-join($segments,'/'),'/')
For more details on these functions, check out their reference pages:
fn:tokenize()
fn:string-join()
fn:replace can do the job with a regular expression:
replace("/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/TRN_282C_HYD_MOD_1_Drive_Shaft_Rev000.xml",
"[^/]+$",
"")
This can be done even with a single XPath 2.0 (subset of XQuery) expression:
substring($fullPath,
1,
string-length($fullPath) - string-length(tokenize($fullPath, '/')[last()])
)
where $fullPath should be substituted with the actual string, such as:
"/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/TRN_282C_HYD_MOD_1_Drive_Shaft_Rev000.xml"
The following code tokenizes, removes the last token, replaces it with an empty string, and joins back.
string-join(
(
tokenize(
"/db/Liebherr/Content_Repository/Techpubs/Topics/HyraulicPowerDistribution/Released/TRN_282C_HYD_MOD_1_Drive_Shaft_Rev000.xml",
"/"
)[position() ne last()],
""
),
"/"
)
It seems to return the desired result on try.zorba-xquery.com. Does this help?
Related
I have the following page querystring:
register.aspx?id="jSmith"
I have the following code to retrieve the value of ID
string qString = string.IsNullOrEmpty(Request.QueryString["id"]) ? string.Empty : HttpUtility.UrlDecode(Request.QueryString["id"]);
When I view the value of qString I get something like
"\"jSmith\""
so when I do the following:
if (qString == "jSmith")
{
........
}
it does not not execute the if condition. What do I need to do s that it does not have the quotes.
The code is correct.
The problem is that you are passing to the page "jSmith" with the double quotes as part of the string.
Try invoke the page this way
register.aspx?id=jSmith
That is because the correct way to give the path in this case would be register.aspx?id=jSmith, without the quotes. If you need spaces, or other special characters, in your ID, these should be URL encoded (and will be decoded by your code), but not enclosed in quotes.
For example, if your id was the string john smith, the URL would become register.aspx?id=john+smith, since + is the URL encoding of a space.
You don't need to put quotes around values in querystring, by definition they're all strings...
Your querystring should look like :
register.aspx?id=jSmith
You do not need the quotation marks in your querystring.
It should read
register.aspx?id=jSmith
You should look for
if (qString == "\"jSmith\"")
the \ is escaping the extra "
or you could perform a replace to remove the extra "
use
Response.Redirect("Qstring.aspx?name= smith");
and on the page Qstring.aspx load event
string s=Request.QueryString["name"].ToString();
gives u "smith" in s variable
I'm using a linq query where i do something liike this:
viewModel.REGISTRATIONGRPS = (From a In db.TABLEA
Select New SubViewModel With {
.SOMEVALUE1 = a.SOMEVALUE1,
...
...
.SOMEVALUE2 = If(commaseparatedstring.Contains(a.SOMEVALUE1), True, False)
}).ToList()
Now my Problem is that this does'n search for words but for substrings so for example:
commaseparatedstring = "EWM,KI,KP"
SOMEVALUE1 = "EW"
It returns true because it's contained in EWM?
What i would need is to find words (not containing substrings) in the comma separated string!
Option 1: Regular Expressions
Regex.IsMatch(commaseparatedstring, #"\b" + Regex.Escape(a.SOMEVALUE1) + #"\b")
The \b parts are called "word boundaries" and tell the regex engine that you are looking for a "full word". The Regex.Escape(...) ensures that the regex engine will not try to interpret "special characters" in the text you are trying to match. For example, if you are trying to match "one+two", the Regex.Escape method will return "one\+two".
Also, be sure to include the System.Text.RegularExpressions at the top of your code file.
See Regex.IsMatch Method (String, String) on MSDN for more information.
Option 2: Split the String
You could also try splitting the string which would be a bit simpler, though probably less efficient.
commaseparatedstring.Split(new Char[] { ',' }).Contains( a.SOMEVALUE1 )
what about:
- separating the commaseparatedstring by comma
- calling equals() on each substring instead of contains() on whole thing?
.SOMEVALUE2 = If(commaseparatedstring.Split(',').Contains(a.SOMEVALUE1), True, False)
I've got a string like so
Jamie(123)
And I'm trying to just show Jamie without the brackets etc
All the names are different lengths so I was wondering if there was a simple way of replacing everything from the first bracket onwards?
Some others are displayed like this
Tom(Test(123))
Jack ((4u72))
I've got a simple replace of the bracket at the moment like this
mystring.Replace("(", "").Replace(")","")
Any help would be appreciated
Thanks
VB.NET
mystring.Substring(0, mystring.IndexOf("("C)).Trim()
C#
mystring.Substring(0, mystring.IndexOf('(')).Trim();
One logic; get the index of the ( and you can trim the later part from that position.
public static string Remove(string value)
{
int pos = value.IndexOf("(");
if (pos >= 0)
{
return value.Remove(pos, remove.Length);
}
return value;
}
aneal's will work. The alternative I generally use because it's a bit more flexible is .substring.
string newstring = oldstring.substring(0,oldstring.indexof("("));
If you aren't sure that oldstring will have a "(" you will have to do the test first just as aneal shows in their answer.
String.Remove(Int32) will do what you need:
Deletes all the characters from this string beginning at a
specified position and continuing through the last position.
You will also have to .Trim() as well given the data with padding:
mystring = mystring.Remove(mystring.IndexOf("("C))).Trim()
I am trying to write a regular expression that doesn't allow single or double quotes in a string (could be single line or multiline string). Based on my last question, I wrote like this ^(?:(?!"|').)*$, but it is not working. Really appreciate if anybody could help me out here.
Just use a character class that excludes quotes:
^[^'"]*$
(Within the [] character class specifier, the ^ prefix inverts the specification, so [^'"] means any character that isn't a ' or ".)
Just use a regex that matches for quotes, and then negate the match result:
var regex = new Regex("\"|'");
bool noQuotes = !regex.IsMatch("My string without quotes");
Try this:
string myStr = "foo'baa";
bool HasQuotes = myStr.Contains("'") || myStr.Contains("\""); //faster solution , I think.
bool HasQuotes2 = Regex.IsMatch(myStr, "['\"]");
if (!HasQuotes)
{
//not has quotes..
}
This regular expression below, allows alphanumeric and all special characters except quotes(' and "")
#"^[a-zA-Z-0-9~+:;,/#&_#*%$!()\[\] ]*$"
You can use it like
[RegularExpression(#"^[a-zA-Z-0-9~+:;,/#&_#*%$!()**\[\]** ]*$", ErrorMessage = "Should not allow quotes")]
here use escape sequence() for []. Since its not showing in this post
i need a Regular Expression to convert a a string to a link.i wrote something but it doesnt work in asp.net.i couldnt solve and i am new in Regular Expression.This function converts (bkz: string) to (bkz: show.aspx?td=string)
Dim pattern As String = "<bkz[a-z0-9$-$&-&.-.ö-öı-ış-şç-çğ-ğü-ü\s]+)>"
Dim regex As New Regex(pattern, RegexOptions.IgnoreCase)
str = regex.Replace(str, "<font color=""#CC0000"">$1</font>")
Generic remarks on your code: beside the lack of opening parentheses, you do redundant things: $-$ isn't incorrect but can be simplified into $ only. Same for accented chars.
Everybody will tell you that font tag is deprecated even in plain HTML: favor span with style attribute.
And from your question and the example in the reply, I think the expression could be something like:
\(bkz: ([a-z0-9$&.öışçğü\s]+)\)
the replace string would look like:
(bkz: <span style=""color: #C00"">$1</span>)
BUT the first $1 must be actually URL encoded.
Your regexp is in trouble because of a ')' without '('
Would:
<bkz:\s+((?:.(?!>))+?.)>
work better ?
The first group would capture what you are after.
Thanks Vonc,Now it doesnt raise error but also When i assign str to a Label.Text,i cant see the link too.Forexample after i bind str to my label,it should be viewed in view-source ;
<span id="Label1">(bkz: here)</span>
But now,it is in viewsource source;
<span id="Label1">(bkz: here)</span>