Visual Studio 2008 - ASP.NET Web Service Application - Cannot consume web service - asp.net

I'm running on Windows 7
I have a ASP.NET Web Service Application project in Visual Studio 2008.
I tried to test the Web Service(even with just the initial Hello World Method) : Build Solution, Start Without debugging -> The ASP.NET Development Server starts (localhost: 49345) but the browser (Chrome, Firefox, IE) says : could not find localhost:49345 (http://localhost:49345/Service1.asmx).
I thought it might have something to do with IIS so I went into Control Panel -> Programs and features -> Turn Windows Features On and OFF and I selected the Internet Information Servicess clicked OK instaled and restarted the PC. Tried again but got the same error message.
I don't know what the deal is. I've tried same thing on my Vista Laptop ( Control Panel -> Programs and features -> Turn Windows Features On and OFF -> Internet Information Servicess not installed ) and it worked flawless as it should. I read somewhere though, that these web services don't go through the IIS , instead they go straight through the ASP.NET Development Server in the Vistual Studio.
Also I've tried to disable Windows Firewall. Still no go.
Any advice is welcomed and great.
Please help as quickly as you can.
Thanks

http://localhost:49345 is different from http://localhost:49345/Service1.asmx.
I would suggest from the visual studio, right click on your asmx file and select view in browser. It would resolve the address of asmx and show you the asmx content. This would be a good start to see what is wrong (if something is really wrong)

I figured out what it was.The "hosts" file in the C:\Windows\System32\drivers\etc\ folder
Had the problem : besides localhost there were several other things assigned to the 127.0.0.1
I commented all the other lines with 127.0.0.1 except for the 127.0.0.1 localhost.
Saved the file.
Tried again -> Worked like a charm.
Thaks guys for your help.

Related

Problems publishing site to localhost on windows 2008 rs server

I must preface this post by saying that I am not an experienced developer, I am in the process of learning through trial and error and a lot of google searches so detailed (step-by-step) feedback would be greatly appreciated. I created a website, which does not use a database, using visual studio 2015 and I am attempting to host it locally on a Windows 2008 R2 server.
I installed IIS and loaded the asp.net v4.0 framework. The site works fine, produces no errors when I test it and works after being published only if the visual studio is still running.
However, when I close the Visual studio and open my browser window to http://localhost:50044 (which is the URL listed in properties menu in VS), I also tried using port :80 and nothing. When trying to add Web Site via the IIS management utility I receive the following authentication error: ”Cannot verify access path (C:\Inetpub\wwwroot).”
I checked the permissions and windows authentication is enabled with read access, and all other permissions seem to be correct. I am at a loss, I'm sure it is probably something simple that I am missing due to my lack of knowledge and experience. Any help would be appreciated.
It's sounds like you are running on IIS express which in your case stops running when you close visual studio. Normal process is create a new website in IIS and point to the folder where your web.config is. You can then hack your host file (C:\Windows\System32\drivers\etc) so DNS works. Add an entry like "127.0.0.1 mytestwebsite.com". I hope that helps
So I figured out part of what was happening. I didn't realize that visual studio has built in IIS and was using that by default.
I ran VS as an admin, created a new project, then attempted to create a virtual directory thru VS under the project/properties/web tab. I selected local IIS and entered http://localhost/boc and it returns an error: unable to create vd. Web server http://localhost... Could not be found.
I then went in to the IIS manager and set up a virtual directory with no issues. However, when I attempt to reference it thru VS I again receive an error message.
Any ideas?

Visual Studio 2010 displays IIS 7 page on debug instead of my project

This is my first ASP.NET project so I am a bit of a rookie when it comes to a lot of the configuring of IIS/Visual Studio so bear with me...
I am using Visual Studio 2010 running on Windows Server 2008 SR2. We recently did some updates on the server and now my project no longer loads when I attempt to debug. When I try to debug the default "Welcome" page for IIS 7 loads instead of my project. I am set up to use the development server to debug, not IIS so I don't understand why I get the IIS page. Before the updates the debugger was pulling up my page without any issues.
Any ideas? Thanks in advance!
It looks like IIS is now bound to the port number that Visual Studio Development Web Server was using previously. You can change the port number in the properties of the web site project.
I have found a solution to my issue. I decided to use IIS instead of the Development Server for debugging. After attempting to debug unsuccessfully yet again, I took a look at the identity that was being used in the application pool and I changed to one with more privileges and that seemed to do the trick. Thanks for the suggestions.
I had the same problem but non-of the earlier answers worked.
I am using Windows 7 enterprise 64-bit, IE11, VS2010, Silverlight 5
I have been developing and maintaining a number of Silverlight projects for the past 5 years, and have always been able to debug them within VS2010 using the ASP.NET Development Server. However, on returning from some well deserved holiday, I found that none of my existing Silverlight projects would run in the debugger. In each case there is a Web project set as the start-up project, and in each case on starting the project within VS2010 (with or without debugging) I got the IIS7 web page instead of my application.
I tried creating a new Silverlight web application, and found that this started normally in the ASP.NET Development Server. I checked my source code and found that no changes had been made in my absence.
After a lot of head scratching, etc., the solution was to clear the IE cache. These are the explicit steps I used:
Close all instances of IE and ASP.NET Development Server.
Open Internet Properties from the Control Panel.
Click "Delete" on the General Tab.
In the Delete Browsing History box check the following options:
a) "Preserve Favourites website data"
b) "Temporary Internet files and website data"
c) "Cookies and website data"
Leave the others unchecked
5) Click "Delete" and wait for the command to complete.
6) Close the Internet Properties box.
7) Rebuild ASP.NET project
8) Start (with or without debugging) in VS2010 - it should now load normally.
Hope this works for you.

Debugging ASP.NET in IIS 7

I have searched all the usual but come up empty. I must be doing something silly!
Simply I created a new project, ASP.NET Web App, and wish to use and debug it with the local install of IIS 7.5 on my Windows 7 x64 box.
According to what I have read it should be a simple process; my issue is that Visual Studio will not stop at breakpoints nor at errors etc.
I just don't get it:
Visual Studio is attaching to the w3p process for me automatically.
If I hover over the breakpoints it shows a message saying the same, that it is in the same w3p process.
I am in Administrator context. I manually ran it like so to be sure but in any case if you are an admin it runs like that anyway.
Some notes:
I do not wish to use IIS Express as I require native IIS 7.5 for my tasks, however it does debug in express - no surprise there.
As mentioned above, all this is being done locally.
The path of the virtual directory is pointed towards the project files, as set by Visual Studio 2010. It even set the Network Service as read on the folder structure.
When debugging from VS the web site runs fine, just debugging is the issue.
Maybe it is permissions? The Default App Pool is using the ApplicationPoolIdentity not Network Service... Should it be? I had assumed they we.re one and the same essentially. Although I changed this and no luck unless I didn't do something I should of
Keep in mind here that my issue is semi-unique in that I am not receiving error messages, not even in the event logs... For all intents and purposes it should be working fine, just it isn't.
VS and IIS, and all updates, are applied to date.
Note: I'm familiar with IIS7.5, I run my own public web hosting server. I just never tried to debug
Note: It is Visual Studio 2010 Ultimate
Thanks for your time.
Sigh!
I went back to basics... Uninstalled IISExpress and tested; It worked! Re-installed IISExpress; It worked!.
I guess installing IIS7 native after IISExpress did something screwy? I had ran the register ISS command on IIS7 when I installed it.
Right, so now I have both installed in tandem and they work fine. Thanks for all your help guys, appreciated.
you can try right-click on project in VS go to properties select web from left menu tab. Check if ASP.NET debugger is checked and also you can select Use Local IIS Server and give localhost url there (in project Url textbox) and then Say start debugging from VS and put breakpoints.
I had a similar issue the other day, I attached the debugger to the wrong w3p process, make sure you attach it to the one the app pool identity is running under.
I wanted to write it as comment by I don't think I can add pictures..
Are you sure you are running the same version of dll?
Is your breakpoint filled like this?
or hollow like this?
1st go to ,Program and Feature in control panel and then in that turn on or off windows features. and now check all check boxes(activate features) related to Internet Information server & windows service managers. once this is done run your visual studio as administrator and then attach to right w3p process.

Can't debug ASP.NET application stored in IIS

I have a question regarding IIS (version 7.5) and ASP.NET (.NET Framework 4) . I am trying to debug ASP.NET web application which is stored on IIS. Now, I have done this in past and everytime it worked perfectly.
But now when I try to do same, **Visual Studio 2010** always gives me error, **"unable to start debugging on the web server. the iis worker process for the launched URL is not currently running" ...** even the application I had created in past (& stored in IIS) can't debug using Visual Studio. But all applications (new & old) can be accessed if I type their path in Browser, and they work fine too.
I did search on internet about my problem and I found many posts, but almost every post talks about activating **Windows Authentication** in IIS for the application in question. But, I am using Windows 7 home premium and the IIS shipped with this version doesn't support option for Windows Authentication. Also, if this is the only reason then why my old applications were working just fine till now without this Authentication method?? I found MSDN help about this error but it is not much helpful to me. I also checked APPLICATION POOL selection in IIS and my Application (both are using V.4.XX.XXX)... I have also checked **BINDING** , which is *:80 to Default Website, that means all requests to port 80 will be directed to default website (where my all applications reside)
As a side note, I have SharePoint Server 2010 installed. Which has its own website (which I have disabled while debugging) ...
I think there is something is changed in my IIS configuration, but I cant figure out what it is. And I am sure that it has something to do with SharePoint installation (may be because of more than one website on IIS for same port ??). Because I am using IIS for first time after installing SharePoint and I am having this error.
I will really appreciate if any one has answer ...
Thanks,
Jack
UPDATE: As I suspected ... having more than one site in IIS was root cause of trouble, Once I uninstalled Sharepoint Server 2010 and its web sites from IIS, my Visual Studio 2010 debugger was able to "Auto-Attach" w3wp.exe process while debugging any application ... ( I really don't see any reason that even after disabling all other websites why still it was giving me error at first place ?? )
I know its not a solution, because I have to remove Sharepoint Server ... but at present its more important for me to work on that application then Sharepoint Server.
But I am still open for any suggestions which might help me to run both together ....
Thanks,
Jack
Check the Bug fix for this issue in the Microsoft's Connect site.
.
Is it with .NET 3.5 in Visual Studio 2010 , if yes , then check http://www.ginktage.com/2010/08/fix-for-visual-studio-2010-hangs-when-debugging-asp-net-3-5-web-application/ for information

How do you debug ASP.NET applications under IIS7 on Vista?

There is a post on IIS.net titled "Using Visual Studio 2008 with IIS 7.0", but I don't quite believe that's what people do. (Among other gems, it suggests publishing your web app after every change.)
If you debug your ASP.NET applications in IIS7 instead of Cassini, I would love to hear your methods, tips, and tricks.
Edit: I'm referring specifically to local debugging.
I believe I pointed you toward that guide, but as I look closer at it I think that's a little more elaborate than what I do. I have done the following:
Create a web site in IIS for your project.
Add a custom host header to that site, for example http://mysite:*/ or http://mysite:80/
Open the hosts file located at C:\Windows\system32\drivers\etc in notepad (Run As Admin if you're on Vista) and add the following line:
mysite 127.0.0.1
If you have more than one host header on your website in IIS, you need to have each one represented in the hosts file.
Now, when you press F5 in Visual Studio, the site will open with the url http://mysite and you'll be able to debug, set breakpoints etc as usual, except with no Cassini related problems... ;)
Edit: For clarification, I just want to point out that I have never had to attach any process to VS, as far as I know. At the very least I do not have to do it every time.
I simply attach Visual Studio to the IIS worker process, if you have multiple app pools then you can run "issapp" to get the appropriate PID.
I never debug by clicking "Start Debugging".
This has a nice advantage of working on remote servers as well, if you have installed msvcmon.
Well, setting up IIS 7 for debugging isn't terribly tricky, but what I prefer to do to save time (and if I'm uninterested in debugging from a cold start) is to launch the Web Application/Web Site in a web browser first - let ASP.net precompile etc.
Then I'll attach to the IIS process using Visual Studio. Once attached I can go about setting breakpoints and debugging, I find this is a faster way to get going.
I launch Visual Studio as an Administrator, then Debug > Attach to Process > w3wp.exe.

Resources