OS: Ubuntu14.04 64 bit
I have a strange problem occuring on machines with Nvidia cards running Ubuntu 14.04 64 bit.
The mount command works when using the IP address but fails when using the host name
Not-working command :
sudo -S mount -t cifs //share.test.com/LAB/Testing/Path1/Path2/Requisite/ -o username=blabla,password=blabla /mnt/src_shar_lnx
the error being
mount: wrong fs type, bad option, bad superblock on //share.test.com/LAB/Testing/Path1/Path2/Requisite/ ,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
The above command works seamlessly on other machines without Nvidia cards.
Working command:
sudo -S mount -t cifs //192.168.200.1/LAB/Testing/Path1/Path2/Requisite/ -o username=blabla,password=blabla /mnt/src_shar_lnx
Resolved.
installing cifs-utils solved the problem
what is the command to know the L2 cache size of CPU on Solaris operating system running on Sparc and x86 processors.
I don't have access to a Solaris box to test this out, but you might be able to achieve this using prtpicl.
prtpicl -v -c cpu | grep l2-cache-size
For a more portable option, check out the lstopo command from the hwloc project.
On sparc just run fpversion (/product/SUNWspro/bin/fpversion) and it will print the xcache code-generation options that show the L1 and L2 cache sizes. Then read http://docs.oracle.com/cd/E19205-01/819-5267/bkazt/index.html to understand it.
I am trying
sudo mount -t cifs //<server>/<share> -o username=user#domain,password=**** /mnt/<mountpoint>
error message:
mount: wrong fs type, bad option, bad superblock on //server/share,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
The syslog has
CIFS VFS: cifs_mount failed w/return code = -22
I am able to mount the same share on another centos system. I can ping the server, mount point directory has been created.
I ran into this problem when using a host name and solved it by using an IP address. E.g.:
use
mount -t cifs //192.168.1.15/share
rather than
mount -t cifs //servername/share
Another possible solution is to install
cifs-utils
.
Ah, the dreaded -22. Basically this seems to be used as a catchall for "something didn't work", although technically it's referred to as an invalid argument.
The client does IMHO a very poor job of telling you the actual problem. (This may not be its fault - it doesn't always have access to that information).
However -- have you checked the logs on the server/machine you are connecting to?
I was connecting to an OS X samba server, and learned from what I found in the logs there that it was necessary to specify additional options under -o as follows:
nounix,sec=ntlmssp
Among the things these settings enable are "allow long names", and "ignore UNIX filename endings"...sec is to specify security flags.
Another possibility is that you're trying to access a filesystem of a type that mount.cifs can't actually handle.
For RHEL/Centos install package - "cifs-utils"
Maybe move the target?
sudo mount -t cifs -o username=user#domain,password=**** //<server>/<share> /mnt/<mountpoint>
Or maybe this solution? (Ubuntu, Debian methods)
sudo apt-get install smbfs
Or for CentOS, RedHat, Fedora try:
sudo yum install samba-client
I had a similar issue on Ubuntu 12.04 with the "mount" package (version 2.20.1-1ubuntu3).
It happened when I was trying to mount the server share using its hostname rahter than its IP.
Another way to solve the issue on Ubuntu was to install the cifs-utils package. That way I could also mount the samba share using the exact same command line (or fstab) but with hostname.
sudo mount -t cifs //hostname/share -o username=user,password=pwd /mnt/share
Just did a clean install of Ubuntu 12.04 LTS and got this trying to hook up my Linux HTPC.
Solved it by running: sudo apt-get install cifs-utils then remounting it.
CIFS returns code "-22" in many cases (not only invalid arguments).
For me installing keyutils did the trick:
apt-get install keyutils
My distribution is "Ubuntu 14.04.2 LTS".
I figured this out by increasing the logging verbosity of CIFS:
echo 7 > /proc/fs/cifs/cifsFYI
# disable again via:
#echo 0 > /proc/fs/cifs/cifsFYI
Documentation on the bitmask ("7") for cifsFYI can be found here: https://www.kernel.org/doc/readme/Documentation-filesystems-cifs-README
After trying to mount once more dmesg included more helpful information:
Dec 7 12:34:20 pc1471 kernel: [ 5442.667417] CIFS VFS: dns_resolve_server_name_to_ip: unable to resolve:
Another maybe helpful link:
http://vlkan.com/blog/post/2015/01/08/smb-mount-troubleshoot/
I have Ubuntu Server 12.10 x64 installed as a VMware VM, running on OS X 10.8 (Mountain Lion).
On the Mac, in SYSTEM PREFERENCES > SHARING > FILE SHARING (on), I added a folder to share. For my tests, I created a new folder within my Public folder called "ubuntu".
In Ubuntu, I issued the following commands:
sudo mkdir /media/target
sudo mount.cifs //10.0.20.3/ubuntu /media/target -o username=davidallie,nounix,sec=ntlmssp,rw
Ubuntu prompted me for the password and, once entered, mounted the folder. I then ran:
df -H
which allowed me to verify the mounts and mount-points.
This has recently manifested thanks to a kernel bug in v5.18.8+, I was able to reproduce on v5.18.9 and v5.18.11.
Here is the relevant ticket on kernel.org, quote:
it appears that kernel 5.18.8 breaks cifs mounts on my machine. With
5.18.7, everything works fine. With 5.18.8, I am getting:
$ sudo mount /mnt/openmediavault/
mount error(22): Invalid argument
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel
log messages (dmesg)
The relevant /etc/fstab line is:
//odroidxu4.local/julian /mnt/openmediavault cifs
credentials=/home/julas/.credentials,uid=julas,gid=julas,vers=3.1.1,nobrl,_netdev,auto
0 0
Here is the offending commit, and here is the fix, which applies cleanly to v5.18.11. The cause is, from what I understand, a bug in old versions of the samba server in the negotiation protocol.
If this is your issue, you can:
patch your kernel yourself;
downgrade to v5.18.7;
switch to an LTS kernel;
use the userspace (and also really slow and awful) gvfs-smb;
upgrade the samba version on your server; or
add vers=2.0 to the mount.cifs options in /etc/fstab.
Note that while I haven't tried the last one personally, the venerable #SEBiGEM has confirmed in the comments that it works for v5.18.10.
Note also that I didn't try upgrading samba on the server at all because I hate touching the box it's running on - every time I upgrade anything everything breaks. Doing so might also not be an option for those with NAS appliances.
As a personal sidenote, it's a little sad that so many different things can cause -22. My answer is correct, but very very niche and specific to this point in time. I imagine in a month it will simply be useless noise.
Just experience the problem on RHEL 5. You don't need to install the samba suite, just the samba-client and any dependencies.
Maybe it's too late, but simplest solution described in kernel bug 50631:
in the latest code, unc mount parameter in mandatory. Modified command works for me:
sudo mount -t cifs //<server>/<share> -o username=user#domain,password=****,unc=\\\\<server>\\<share> /mnt/<mountpoint>
Try run the comamnd:
$modinfo cifs
filename: /lib/modules/3.2.0-60-virtual/kernel/fs/cifs/cifs.ko
version: 1.76
description: VFS to access servers complying with the SNIA CIFS Specification e.g. Samba and Windows
license: GPL
author: Steve French <sfrench#us.ibm.com>
srcversion: 9435BBC2F61D29F06643803
depends:
intree: Y
vermagic: 3.2.0-60-virtual SMP mod_unload modversions 686
parm: CIFSMaxBufSize:Network buffer size (not including header). Default: 16384 Range: 8192 to 130048 (int)
parm: cifs_min_rcv:Network buffers in pool. Default: 4 Range: 1 to 64 (int)
parm: cifs_min_small:Small network buffers in pool. Default: 30 Range: 2 to 256 (int)
parm: cifs_max_pending:Simultaneous requests to server. Default: 32767 Range: 2 to 32767. (int)
parm: echo_retries:Number of echo attempts before giving up and reconnecting server. Default: 5. 0 means never reconnect. (ushort)
parm: enable_oplocks:Enable or disable oplocks (bool). Default:y/Y/1 (bool)
If your getting any error then cifs is not installed. Just check with your admin. I thought it helps out.
Adding the option vers=3.0 to the mount command worked for me: sudo mount -t cifs -v <src> <dst> -o ...,vers=3.0,...
You need to install cifs-utils first , just as follows:
sudo yum install cifs-utils
I know this is old, but on older cifs-utils versions, you may have to add the following two lines to /etc/request-key.conf
create cifs.spnego * * /usr/sbin/cifs.upcall -c %k
create dns_resolver * * /usr/sbin/cifs.upcall %k
Workaround without installing additional packages (cifs-utils adds another 81mb in Debian Stretch):
$ FILESERVER_IP=$(getent hosts myfileserver.com | awk '{ print $1 ; exit }')
$ sudo mount -t cifs //${FILESERVER_IP}/<share> -o username=user#domain,password=**** /mnt/<mountpoint>
Many answers, but wasn't work for me.
Solution:
My NAS didn't support Samba 3.0, on which my mount switch automatically.
So I downgraded smb version:
mount -t cifs //192.168.0.2/Share -o rw,vers=1.0,username=*****,password=******* /media/1
It's work.
If I am working on a Unix machine, how could I know the size of the machine whether it is 64-bit or 32-bit machine?
AIX you can do this:
getconf KERNEL_BITMODE
HP-UX you can do this:
getconf KERNEL_BITS
or just:
getconf -a | grep KERN
Sun Solaris you can do this:
isainfo -v
For Linux, yes, the uname -a should do the trick
You can type
uname -m
if i686 or i386 is appearing, you are working with 32 bit
if X86_64 is appearing, you are working with 64 bit
I have to deal with a lot of Unix platforms and generally the best way I have found is to look at the output of "uname -a". For example, if you see something like "i686 i686 i386 GNU/Linux" in the output you know it's a 32 bit machine. If "amd64" shows up it's a 64. Sometimes it's a matter of trying to run a 64 bit programme. Sometimes it's RTFM.
If you're just looking to check the architecture of a machine you're on,
%> uname -a
from the command line usually contains an indication in the output.
You can also try sizeof(int *). Should be 4 on 32 bit machines and 8 on 64 bit machines.
Assuming you want to do this at compile time - take a look here for architecture macros you can test. You are probably looking for __x86_64__.