Does anybody know of a Web Interface for CVS repositories.
I work on Ubuntu 10.04
UPDATE: I have found by lots of Options by Googling, but wanted to know which one(s) people use here. Will give me a heads up instead of me getting to know each & every Interface out there...
ViewVC is the interface used by SourceForge. I found a ton of other interfaces just by Googling "web CVS interface."
Within ubuntu's Apt repository, there are packages for:
* viewvc
* csvweb
Both which can be installed by typing, eg apt-get install viewvc
I use cvsweb on Solaris, but it's easily apt-get installed on Ubuntu.
cvstrac: http://cvstrac.org/
is the one that i used in several projects
Related
I would like to install the Heroku CLI in my Macbook without using HomeBrew. Is there a way to do this? Perhaps by using a native command via terminal? Or some other way that does not depend on another bit of software? I have searched online but have not found a way to do so.
Note: I have had issues with HomeBrew so I no longer use it, and hope to continue installing without it. I also did a search on Stackoverflow, as well as check the suggested similar questions while composing this one.
For anyone else seeking answers: I just figured out how to install Heroku without Brew or using npm. Use the command below (it is in Heroku's instructions page):
curl https://cli-assets.heroku.com/install.sh | sh
I want to start developing of my first test addon. I have a problem on the basis of mr.bob. Any described ways have leaded to one result. my documentation
log image
Check
mrbob --help
do the same answer.
After I came to the conclusion the problem is in pre-installed Python2.7 with no worked mr.bobe and bobtemplates. I do not know how to make a working set.
Looking at your traceback I guess mr.bob is not fully supporting Windows.
The readline module on Windows is not available. There's some alternatives like pyreadline.
Seems it's a know issue: see https://github.com/domenkozar/mr.bob/issues/49
Don't know about mr.bob, but you could alternatively try adi.devgen (disclaimer: one of my add-ons). Install it with pip:
pip install adi.devgen
And then do:
devgen addOn yournamespace.youraddonname
I am trying to follow this tutorial, in order to install the Nix package manager in my home directory instead of /nix.
I am doing the PRoot installation (see 2. in tutorial). At the end, the
tutorial proposes to be smart in Building native packages section, to be
able to run packages without PRoot:
To run packages natively (without PRoot) they have to be build from source because all paths to the nix store are hard-coded. It is simple, really:
mkdir $HOME/nix
nix-channel --update
env NIX_STORE_DIR=$HOME/nix nix-env -i nix
And now your Nix store gets built up using the new paths. The built binaries can be run directly from there.
I did that, but I don't see how it frees me from PRoot. If I don't do the /nix mounting point with PRoot, nothing works (no nix-env executable,
I can't install new packages).
Should this NIX_STORE_DIR environment variable be put in my .bashrc ?
It seems I always need to run PRoot because ~/.nix-profile points to
a /nix/... directory:
.nix-profile -> /nix/var/nix/profiles/default
There are more steps in the tutorial (5., 6.) - should I follow them ? It seems they apply only in case of using the manual installation (step 4.),
although it is not explicit.
Any help would be appreciated :)
For anyone stumbling on this old question: there is no currently supported way to install Nix without root. The above wiki was moved to https://nixos.wiki/wiki/Nix_Installation_Guide . It may well be out of date. PRoot could work, but even then, rebuilding the whole store at a different path is not a good idea, not the least because the binary caches won't help and you'll need to build everything.
I suggest trying Nix in a virtual machine or cloud server.
Future people from Google, it's still unsupported but does work. Script here that installs a couple dependencies, builds a temporary Nix, and uses that to install a proper version in your directory of choice.
I'd like to discover the guile ecosystem. I looked at how to install a library and I didn't find a package manager, like python's pip. Does such a thing exist for guile ?
Looks like guildhall is the closest thing to pip out there. There has been some discussion on the Guile mailing lists recently around it. The posts by Wingo, Boubekki, Zaretskii, and a few others who are heavily involved with Guile development indicate a push towards making guildhall an upstream source for something called Guix that is a more general package manager intended to be independent of platform.
If you consult the Guix list of packages you will see guile there and a number of other guile related items (e.g. guile-json, guile-ncurses, etc..). I'd give that a shot. Otherwise you're on your own and you'll have to either fall back to the OS package manager or pull down the source yourself, build, and install.
Full disclosure: I haven't tried Guix myself but I've been meaning to. I'd be very interested to see how it turns out for you so if you do go this route it'd be awesome if you could provide an update with your Guix experience.
There's also been a recent call to update the libraries page and from a quick inspection there's been some small number of updates that you may find useful.
#unclejamil This is an update of my attempt to install the guix package manager.
Documentation
First of all, the links:
the official page: https://www.gnu.org/software/guix/
the download page: http://alpha.gnu.org/gnu/guix/ (guix-the-system and guix the package manager are listed together)
Installation (Debian)
Guix needs Guile-2.0-dev and more dependencies, which are present in Debian's repositories:
apt-get install guile-2.0-dev guile-2.0 libgcrypt20-dev libbz2-dev libsqlite3-dev autopoint
Download guix. See the above links to download a binary. Or get the sources:
git clone git://git.savannah.gnu.org/guix.git
The installation goes with a classical ./configure && make && make install.
make will take several minutes and make install needs root access. If you install from source, make will build guile objects of the 346 base packages (python, zsh, abiword,…) so it'll take a long time (the database is included into guix-the-program, so we must do that. You can still tweak this list in the Makefile, at MODULES) .
Note: Your current directory must not contain non ascii characters.
Note: see also this complete tutorial, with the focus on how to install guix locally, i.e. not to run make install: http://dustycloud.org/blog/guix-package-manager-without-make-install/
Usage
To install packages with guix, we need a running server.
The first method, for testing purposes, is simply to run the server in a terminal:
sudo guix-daemon
and the client in another one:
guix package -s "guile.*curses" # search with regexps
sudo guix package -i guile-ncurses # install. All start with the "package" command.
For the proper method, see https://www.gnu.org/software/guix/manual/html_node/Build-Environment-Setup.html#Build-Environment-Setup
To be continued.
This answer is a community wiki, feel free to complete it, thanks !
I am building Guix right now and encountered the same error about not finding guile-2.0. I managed to fix it by installing the development files for guile-2.0
sudo apt-get install guile-2.0-dev
I encountered some more errors later on and it just meant I needed to install the development files for it.
As i ask before, to use dart-sqlite, I must install dart-ext:sqlite first. But every time I try to build it, I found error= Can not found dart_api.h. how to fix it?
I install it on ubuntu 12.04.
Thank you
It sounds like you didn't follow the build instructions:
Either edit build.sh to point to the SDK, or set the environment variable DART_SDK.
Once you correctly point DART_SDK to the dart-sdk directory of your local Dart installation, the build system will find $DART_SDK/include/dart_api.h just fine.