i need now to make a report. I found some threads here but it just show how to implement some of reportviewer's functions, and I need to know how to create one from the beginning... Its really differente than create one on WindowsForm ;\
Any help or tip ? Thanks
Just did it recently. There are a lot of manuals, like this MSDN Walkthrough: Creating a ReportViewer Report or this
Creating an ASP.NET report using Visual Studio 2010 - Part 1
Creating an ASP.NET report using Visual Studio 2010 - Part 2
Creating an ASP.NET report using Visual Studio 2010 - Part 3
Related
I am trying to convert my current asp net application to an ASP.Net vnext application and I am trying to figure out if we have have to use Visual Studio 15 or visual studio 14 ctp 3 for vnext to work? Will it work in visual studio 12 or 13?
I found this link
http://blogs.msdn.com/b/dotnet/archive/2014/08/18/try-out-the-new-releases-net-framework-vnext-asp-net-vnext-net-native-and-ryujit.aspx
and I haven't heard any updates.
If you want to use Visual Studio, you need Visual Studio 2015 and CTP6.
Good news is, you can have VS2015 installed side by side with 2012 or 2013 with no problems. (really!) And if you are not yet familiarized with the command line tools, I do highly recommend to install vs2015.
For migrations, there's some documentation in the workings on the Docs repo.
check this out : https://github.com/aspnet/Docs/blob/master/docs/migrating/migratingfrommvc5/migratingfrommvc5.rst
this is just one, there are a few more doc pages on that repo that might help you to get started and see which changes should be made and how to apply one by one.
Unfortunately the documentation is not finished and there's not much about it, so be prepared to have patience because you will be migrating and learning a new stack in the process.
Microsoft team has been very active and helpful in all channels (twitter, SO, github, etc) so, you can at least get help if you find a block.
The tooling for ASP.NET 5 is only available for VS 2015.
However, you can build and run ASP.NET 5 applications outside of VS using the command line tool and other editors.
In Visual Studio 2015 Preview, I see the following vNext templates in the "New Project" window:
I am under the impression that I should also see an entry for "ASP.NET 5 Empty Web Application" or something similar, but I see no such thing. Those two entries are the only "vNext" designated entries that I have installed.
Is there an additional binary I need to install in order to enable this type of project to appear? Or do I need to examine my VS 2015 Preview installation?
Note: I do have an entry for "ASP.NET Web Application", which takes me through the setup with the unified architecture but does not appear to include a project.json file or things that I'm associating with ASP.NET 5 development.
Update: Per this article regarding 2013 I also tried to run devenv.exe /installvstemplates, but that didn't work either. To clarify, I don't see any new web template, which the screenshot below illustrates as well:
I was having the same problem, except that unlike the accepted answer suggests, the ASP.NET Web Application was not on the list of templates at all.
I was able to get it to show up after following the instructions from this article.
From Visual Studio 2015: Tools -> Extensions and Updates
Select Online then click Visual Studio Gallery
Search for ASP.NET Project Templates and download the first result.
Go through installation process, relaunch Visual Studio, and Web Application should now be an option!
Alternately, you can download the templates directly here.
I believe this download actually is meant to install some other templates that I wasn't interested in, but installing them must have also installed the base template in the process. Either way, it worked for me.
Visual Studio Ultimate 2015 Preview contains everything you need to create an ASP.NET 5 (vNext) web application. One additional generic option should be available that's not depicted in your question:
It's not entirely clear at this point, but choosing the generic web application option will present a few ASP.NET 5 (vNext) options that you're seeking in the following dialog:
In Visual Studio 2015 Preview Microsoft has renamed ASP.NET vNext to ASP.NET 5
If you open http://www.asp.net/vnext, in every article vNext is metioned as ASP.NET 5
In following Sam's Suggestion, I noticed that there were Updates Pending. One of these updates included the missing ASP.NET 5 templates.
Tools > Extensions & Updates > Updates > Visual Studio Gallery
Once updated & Installed, the Web Application was then available as described in the tutorial.
The new update released this week has renamed ASP.NET 5 into a new framework which they are now calling ASP.NET Core. More information can be found in this article https://blogs.msdn.microsoft.com/webdev/2016/05/16/announcing-asp-net-core-rc2/
VS 2015 Preview is going under ASP.net Core web application. If you cant see that one under templates you may go to this site and download .NET Core 1.0 for Visual Studio then install.
In my case the problem was in the Microsoft .NET Core 1.0.1 VS 2015 Tooling Preview 2 corrupted installation.
It was performed:
install the ASP.NET Project Templates following answer from this post - NO RESULT
reinstalling Microsoft Web Developer Tools from the identical SO post - NO RESULT
fresh install the IDE using TotalUninstaller tool - NO RESULT
repair the Microsoft .NET Core 1.0.1 (see the sketch below) - SOLVED
Only repair .NET Core 1.0.1 finally solved the problem!
For that you have to download the .net core cross platform development, below steps you will refer
open VISUAL Studio installer
click the option in the list click modify
below image you can refer it
once complete installation,now you have the option for asp.net core web application
I need to visualize complex business logic on a single ASP.NET page that has over thousands of lines code so I decided to give Visual Studio's own "Code Map" feature a shot, which is described here: http://msdn.microsoft.com/en-us/library/jj739835.aspx
The tool looks like this:
I tried with VB.NET and C# (including MVC) projects and it was working very well... or that's what I thought, until I tried to use code map tool on an ASP.NET project.
Instead I got this helpful window:
I couldn't find any documentation that says "it's not supported" so I guess I'm doing something wrong? Is there any way to get this tool work, manually trying to add did not help either. I'm open to suggestions.
It appears you're using a File System Web Site Project. These have nebulous support in Visual Studio 2012 and later. I say "nebulous" because I haven't found anything that explicitly states they're deprecated, but the documentation for them is only provided for Visual Studio 2005, 2008 and 2010.
If you need Code Map support for your project, consider converting it to a Web Application.
How to create an rdlc template so that we can use it for all the rdlc files in a project reducing the time to format each and every rdlc file. is it possible to create a rdlc template by which we can have the header to all rdlc files as same as rdlc template by inheriting it??
SSRS for SQL 2008 R2 added some features for using reusable queries (DataSets) and Report headers. The two caveats to this technology is that 1) You can only render these reports via SSRS 2008 R2 (not via the .net reporting controls for Winforms or Webforms), and 2) you need to edit them via Report Builder 3.0 (which requires elevated permissions to SSRS). It will not work with BIDS (VS2008). I have heard that you might be able to edit the new RDLCs by getting an add-on for VStudio 2010 or by using VStudio 2012, but I cannot confirm this.
I usually use a good compare tool, like Beyond Compare, and merge everything from my template into the new report.
It's not that fancy but works. Plus you get a good insight to how reports are defined.
This is usually done through Sub-Reports for Header and Footer.
Is it possible to reuse a header or footer in ReportViewer in Visual Studio 2010?
i work with Nhibernate's framework..
Would you give me advice, what I use to create a report for my web applications..??
Have you tried using the ReportViewer control from Microsoft? I am guessing you are using Visual Web Developer?
ReportViewer Controls (Visual Studio)
In genereal you should try and add a little more information to your question. ;)